We are offering muffle furnace.Construction:horizontal rectangular body made of thick gauge galvanized sheets powder coated with ceramic fibrewool insulation. Heating elements: made from best quality kanthal al wire covered with ceramic blankets. Temperature range: upto 930c 1200c control accuracy: 1% of fsd temperature control: temperature control by electronic digital temperature controller. Size: size rating exterior dimensions9"x 4"x 4" 1500w 15" x 22" x 23"10" x 5" x 5" 2000w 16" x 23" x 24"12" x 6" x 6" 3500w 17" x 24" x 25"18"x 9"x 9" 6000w 20" x 27" x 29" also available in gmp (fully stainless steel 304 quality) model muffle furnace

We are one of the distinguished manufacturer, exporter and supplier of Dumpy Level in Kolhapur, India. This offered product is manufactured by our well-equipped production unit which make use of latest technology, modern machines and high quality raw materials. The unique design and superior quality ensures high demand in the market. The product has a fine finish and can be made as per the specifications of the customers. We handle wholesale orders of the Dumpy Level at reasonable prices.

Features :

• Superior quality
• Reasonable prices
• Smoothly finished

Our company offers a wide range of concrete mixer & vibrators, which is a commonly used apparatus for preparing a homogeneous mixture of various materials like cement, sand, gravel and mainly used in the construction industry. These are suitable for operation on 440 volts, 3 phase, 50 cycle a.c. Supply.Specifications: rsi-164concrete mixer, laboratory model, motorised: light weight laboratory concrete mixer is designed to remove the burdensome work of hand mixing uniform, thoroughly mixed batches can be produced in the field or laboratory.the counterbalanced mixing drum is easy to tilt. Two cubic feet mix capacity. Total drum volume is 2 cubic feet. Mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. Equipped with end towing pole.suitable for operation on 440 volts, 3 phase, 50 cycle a.c. Supply. Rsi-165o concrete mixer, laboratory model: hand. Rsi-166o needle vibrator :astmc 403 the laboratory needle vibrator is used in vibrating concrete test cylinder and beams in the field or laboratory. O it is also widely used in making laboratory specimens, in making concrete products, in experimental work, and in small scale construction projects. O the vibrator is electrically driven and is easily controlled. O the vibrating pin is 350 mm long and 25mm in dia. Flexible shaft is 1.5 mtr or 4 meter long. Vibrating speed is approx. 10, 000 rpm. Powered by a 1 h.p electric motor. Operation on 440 volts, 3 phase, 50 cycle, a.c. Supply. Rsi-167o needle vibrator, same as per rsi-166, but vibrating pin is 350 mm long and 40 mm dia.

We are the largest manufacturer, exporter and supplier of Mould Vibrating Machine in Kolhapur, India. The vibrator offered by us is mounted over coiled springs. The vibrations are developed by way of a revolving eccentric shaft. They are designed as per the quality standards using the latest technology. The simple design ensures easy assembly and dismantling of the cube moulds. We make sure that only quality approved mould vibrating machine reach the customers.

Specifications :

• Heat of Hydration
• RSI-152
  • Calorimeter : IS : 4031, BS 4550, ASTM C186for Heat of hydration of Cement. Consists of : A open mouthed thermos flask, Beckman Thermometer, Insulating material, Container, Hinge, Stirring Motor, thermometer support, Glass stirring rod, Cork stopper, Reading Lens and glass Funnel.
  • Vibrating Machine - IS: 10080, BS 4550 Consists of a frame mounted on coil springs to carry the cube mould , and a revolving shaft provided with an eccentric.
  • By means of a balance weight beneath the base plate attached rigidly to the frame, the center of gravity of the whole machine, including the cube and mould, is brought either to the eccentric shaft, or within a distance 25mm below it.
  • Normal running speed of eccentric shaft is 12, 000±400RPM. Fitted with BELT GUARD. The motor and a crowned pully on the vibration machine.
  • Supplied complete with one cube mould 7.06 cms with base plate. Suitable for operation on 230 V, single phase, 50 cycle, A.C. supply Complete with timer.
• RSI-153 : Vibrating machine with Digital timer.
• RSI-154
  • Pocking rod. Spares
  • Belt
  • Set of Springs
  • Belt guard
  • Cube Mould, steel 7.06 cms with base plate
  • Time switch 0-5 minute.

We are the largest manufacturer, exporter and supplier of Concrete Test Hammer in Kolhapur, India. This is an instrument which is easy to use for a quick measurement of the resistance to pressure of manufactured concrete structures like building and bridges. The test is fast and is unlikely to cause any damage to the concrete. They are designed and constructed keeping in mind the safety and quality standards of the industry under the guidance of professionals. The hammer is suitable for testing concrete with a comprehensive strength of 10 to 70 N/mm2. They are supplied in safe carrying case with an assurance of prompt delivery.

Specifications :

• RSI-129
• Concrete Test Hammer BS 1881 -202, ASTM C805
• The Method is based on the principal that the rebound of an elastic mass depends on the hardness of the surface which it strikes. The Test is fast & unlikely to cause damage to the concrete.
• The hammer is intended for testing the quality of concrete in finished structures such as buildings and bridges. Supplied complete with carrying case and carborundum stone, the hammer is suitable for testing concrete with Compressive Strengths of 10 to 70 N/mm2.
• Weight 1.4 Kgs. App.

We are engaged in offering thickness & length gauge, which are used in diverse applications such as soil analysis, cement & concrete industry rock & aggregate testing and ceramics. These are also used to measure sample sizes of aggregates, sand and fillers. specifications: determination of flakiness & elongation rsi-203thickness gauge : constructed of heavy gauge sheet steel with chromium plating as per is : 2386 (part-1) rsi-204 length gauge: is : 2386 (part-i) constructed from steel, mounted on a hardwood base.

We are reckoned as the leading manufacturer, exporter and supplier of Laboratory Hot Air Oven in Kolhapur, India. The hot air ovens offered by us are manufactured using top quality raw materials and cutting-edge technology. Our range of product is highly demanded due to the consistent and reliable performance along with strong construction of the hot air oven. They are constructed as per technical specifications under the guidance of professionals which ensures durability and reliability of the product.

Features :

• Best technical specifications
• Strong construction
• Durability

We are a distinguished manufacturer, exporter and supplier of Sokkia Auto Level in Kolhapur, India. This comprehensive range of product offered by us is designed and manufactured using premium grade materials and latest technology. It is based on magnetic damping system that offers outstanding accuracy and reliability. The product passes through various quality checks to ensure only quality approved product reach the customers. We offer calibration and repair services for all Sokkia Auto Levels at competitive prices.

We have established ourselves as the largest manufacturer, exporter and supplier of Vernier Transit Theodolite in Kolhapur, India. The offered product is manufactured by our professionals using high-grade materials and latest technology in adherence to quality standards and norms. Our skilled team of professionals test them on various parameters in order to confirm its flawlessness. The rugged design, compact size and user friendliness has led to high demand for them in the market. The product can be availed from us at reasonable prices.

Features :

• Rugged design
• Compact size
• User friendliness

Other Details :

• Direct reading vernier transit theodolite with 10 sec accuracy
• Direct reading theodolite with 20 sec accuracy
• All models made of full brass/gun-metal body having pure silver circles
• Shifting tribeach and optical

We are an established manufacturer, exporter and supplier of Topcon Gowin Total Station in Kolhapur, India. They are manufactured as per the international quality standards and norms. This ensures durability, reliability and a long life to the product. Our quality control team ensures that only quality approved products reach the client. The product is ideal for jobs requiring accuracy and versatility of a high-quality total station. They are widely demanded as it is perfect for demanding surveys and measuring tasks. The product can be availed from us at reasonable prices.

The Topcon Gowin Total Station TKS-202 Provides An Accurate, Low Cost Measuring Solution Featuring :

• 2″ Angle Accuracy Provides 1/16th Of An Inch Accuracy At 1, 000ft.
•  Dual Keyboards With And Expanded Numeric Keypad For Faster Data Input.
• Accurately Measure Up To 2, 000m With A Single Prism.
• Internal Data Storage For Up To 24, 000 Points.
• Single Axis Compensator With ±3′ Compensating Range.
• IP54 Environmental Protection Rating.
• With A Full Alpha-Numeric Keypad And Onboard Memory That Will Hold Up To 24, 000 Points, A 14-Hour Li-On Battery Life, And An IP54 Environmental Rating, The Topcon Gowin Total Station TKS-202 Is A Full-Featured Instrument Designed To Meet The Most Rugged Demands.
• Onboard Software Includes Functions Such As Road, Missing Line Measurement And Resection. For Added Efficiency, It Is Compatible With All Current Topcon® And Sokkia® Field Controllers With A GTS Series Conventional Total Station Driver Installed.

We are a distinguished manufacturer, exporter and supplier of Concrete Testing Equipment in Kolhapur, India. The range of equipment offered by us includes compression testing machine, concrete test hammer, flow table, laboratory cement autoclave, vibrating machine length comparator, and many more. This testing equipment has been proven to deliver optimum performance and we offer them in standard client defined specifications. They are easy to use and are designed keeping in mind international quality standards. We supply the concrete testing equipment within the stipulated time at an affordable price and provide timely after sale services as well.

We are an esteemed manufacturer, exporter and supplier of Test Sieves in Kolhapur, India. we are engaged in offering a wide range of sieves which are manufactured using high polished brass spun frame without any joint, Endicott pattern, double folded bottom, beading at top and tightly fitted to each other. We ensure that only quality approved products reach the clients. We provide them in various sizes and diameters as per the requirements of the client.

Specifications :

• RSI-240
• Standard Test Sieves
• Fine Mesh Test Sieves  - Diameter 20cm/30/45 cm. Made from high polished brass spun frame without any joint, Endicott pattern, double folded bottom, beading at top and tightly fitted each other:
  • Lid and Pan for above made of brass, joint less, 20 cm dia
  • Lid and Pan for above made of brass, joint less, 30 cm dia

• Coarse Test Sieves - Diameter 20 cm. Made of high polished brass spun frame. Fitted with steel perforated square openings.
• Sieves Designation - 100 mm, 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25 mm, 20 mm, 16 mm, 12.5 mm, 10 mm, 8 mm, 6.3 mm & 4.75 mm. L & P.
• Coarse Test Sieves - Diameter 30 cms. Brass frame with steel perforated Square openings. 100 mm, 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25mm, 20 mm, 16mm, 12.5 mm, 10mm, 8 mm, 6.3 mm & 4.75 mm. Lid and pan for 30 cms dia.
• Coarse Test Sieves - Diameter 30 cms. Brass frame with steel perforated Square openings without Joint. Fitted with steel perforated square opening 100 mm, 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25 mm, 20 mm, 16 mm, 12.5 mm, 10mm, 8 mm, 6.3 mm & 4.75 mm. Lid and pan for 30 cms. Without Joint.
• Coarse Test Sieves - Diameter 300 mm G.I. Sheet frame with joint & fitted with steel perforated square openings. 125 mm, 106 mm, 90 mm, 75mm, 63 mm, 53 mm, 45 mm, 37.5 mm, 26.5 mm, 22.4 mm, 19 mm, 13.2 mm, 11.2 mm, 9.5 mm, 6.7mm, 5.6 mm with Lid and Pan.
• Coarse Test Sieves - Diameter 450mm GI. Sheet frame with joint & fitted with steel perforated square openings. 125 mm, 106 mm, 90 mm, 75mm, 63 mm, 53 mm, 45 mm, 37.5 mm, 26.5 mm, 22.4 mm, 19 mm, 13.2 mm, 11.2 mm, 9.5 mm, 6.7mm, 5.6 mm Lid and Pan.

We are regarded as the leading manufacturer, exporter and supplier of Concrete Compression Testing Machine in Kolhapur, India. The offered machine is available in both manual and electrical configuration. The machine has high stability and durability. They are designed keeping in mind quality standards and norms. The machines can be availed from in various dimensions as per the specification of the client.

Specifications :

• RSI-095
  • Compression Testing Machine, hand operated, 2000 Kn (200 tonne),
  • Channel Model: Fitted with double plunger pump and hydraulic Load gauge 0-2000 KN cap

• RSI-096
  • Compression Testing Machine, hand operated, 2000 KN (200 tonne), 2 or 4 Pillar model, with separate pumping unit connected by a copper/rubber hose pipe, double plunger with pressure gauge 0-2000 KN capacity.

• RSI-097
  • Compression Testing Machine, 250 KN (25 tonne) Electrically-cum-manually operated. Two Four/Pillar Model. "
  • Compression Testing Machine, 500 KN (50 tonne) Electrically-cum-manually operated.

• RSI-099
  • Compression Testing Machine, 1000 KN (100 tonne) cap.
  • Electrically-cum-manually operated. 2 or 4 Pillaar Model

• RSI-100
  • Compression Testing Machine, 1000 KN (100 Tonne)cap. Electrically-cum manually operated. 2 or 4 Pillar Model : with two pressure gauges i.e. 0-500 KN x 2.5 KN divn. and 0-1000 KN x 5 KN/ divn.

• RSI-101
  • Compression Testing Machine, 2000 KN (200 Tonne) cap. Electrically-cum-manually operated. 2 or 4 pillar model.

• RSI-102
  • Compression Testing Machine, 2000 KN. (200 tonne) cap.,
  • Electrically-cum-manually operated with two
  • Load gauges 2 or 4 Pillar Model. 0-1000 KN x 5 KN/divn. and 0-200KN x 10 KN/divn.

• RSI-103
  • Compression Testing Machine, 2000 KN (200 tonne) cap.,
  • Electrically-cum-manually operate with 3gauges. 2 or 4 Pillar MODEL. 0-500 KN x 2.5 KN, 0-1000 KN x 5 KN/div. and 0-2000 KN x 10 KN/divn.

• RSI-104  
  • Compression testing Machine. Digital 2000 KN x 1 KN least count.                      
  • RSI series Compression Testing machine are the finest of there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. RSI Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS:516.

 

Some Salient Features :

• High Stability,
• Self Aligning
• Platen Suitable for Testing Cubes and Cylinders of various sizes,
• Brick can also be tested,
• Digital having function of peak hold facility, memory status,
• automatic cutoff of maximum Load, Alarm generated when the sample breaks down,
• Cubes of size 50 mm - 200 mm can be tested, Cylinders 100 mm x 200 mm ht.& 150 mm dia. x 300 mm ht. can be tested.   

 

Note : You can get Digital Readouts in all Machines cap. 250 KN to 3000 KN.

We are one of the top manufacturers, exporters and suppliers of Cube Moulds in Kolhapur, India. The moulds help in testing the properties of the hardened concrete. The offered moulds are designed and manufactured as per the standards of the industry. The fine finish and tight dimensions lead to the best result every time. We provide them in proper packages that ensure safe and prompt delivery. We specialise in wholesale orders with an assurance of damage-free delivery.

Specifications :

• Complete with base plate. The faces of the mould are machined flat to /- 0.02mm accuracy and finished to within - 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel.
• The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage.
• The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.The base plate is attached to the mould by cleats .
• The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.
• Sizes Available - 50 mm/ 100 mm/ 150 mm

Optional Accessories :

• Spanner for demoulding and moulding
• Tamping rod with sauqre face
• Cube mould 7.06 cms:
• As per IS: 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 /- 0.2 kg. Material for construction of these moulds is mild steel.

Beam Moulds :

• For casting concrete specimens for flexural tests.
• The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Steel. Faced are machined flat to /-0.2mm and finished in size to 0.2mm. AS PER IS: 516

We are one of the most reputed manufacturers, exporters and suppliers of Aluminium Telescopic Stand in Kolhapur, India. The stand is manufactured and designed using premium grade aluminium using the latest technology. They are viable in various dimensions and can be availed from us at affordable prices. The quality control team ensures that only quality approved stands reach the market. We supply them in safe packages that promise defect-free delivery.

 

Features :

• Made of Aluminium body Telescopic in 3 PCS, 4 meter in length packed in canvas cover, graduated in meters, dm, cm, and mm with background and black strips. 5 mm thick with suitable locking arrangement
• Made of Aluminium body / Metalic Body folding in 2 PCS, 4 meter in length graduated in meters, dm, cm and mm. with white background and black strips. 5mm thick with suitable folding & locking arrangement.
• Improved soap with pattern is made of best quality well seasoned teak wood, Telescopic in three pieces, brass fitting and glued, thus greatly increasing its strength, stability and durability,
• Accurately machine divided and engraved to read 5 mm. painted and polished.
• Size 4 meters. Long
• Size 5 meters. Long
• Size 6 meters. Long.
• Tripod

Available in many Ranges :

• Wooden Tripod Sizes: Full Length: 1828mm, 1760mm, 1700mm, 1600mm, 1550mm. Min. Length: 1168mm, 1090mm, 1070mm, 1000mm, 950mm.
• Fiber-Glass Tripod Sizes: Full Length: 1850mm. Min. Length:1150mm.
• Fiber-Wooden Tripod Sizes: Full Length: 1760mm. Min. Length:1090mm.
• Aluminum Tripod Sizes: Full Length: 1650mm, 1655mm, 1655mm, 1800mm, 1700mm. Min. Length: 970mm, 1025mm, 1030mm, 1045mm, 1000mm
• Elevating Tripod Sizes: Full Length: 2850mm. Min. Length:1250mm.

Based in Kolhapur, India, we are one of the leading manufacturer, exporter and supplier of Length Gauges. They are used widely in various applications like soil analysis, cement and concrete industry, rock testing and ceramic testing. They are designed as per the international quality standards using the latest technology. The gauges are used to measure sample sizes of aggregates, sand and filters effectively. The length gauges can be availed from us at leading market prices and we promise to deliver within the stipulated time.

Specifications:

• Determination of flakiness & elongation
• RSI-203
• Thickness Gauge
• Constructed of heavy gauge sheet steel with chromium plating as per IS : 2386 (Part-1)
• RSI-204
• Length Gauge - IS : 2386 (Part-I) Constructed from steel, mounted on a hardwood base.

We are offering oven.Our thermostatically universal ovens are double walled and the exterior is constructed from mild steel finished in powder coated paint. These are available with various options such as air circulating fan, electronic digital indicator cum temp controller an instead of l shape thermometer. specifications: rsi-241thermostatically universal oven bs:2648, 1881, 598, 1377 & 1924.double walled, exterior is constructed from m.steel finished in powder coated paint. with glass wool insulation between two walls. Inner wall made of aluminium stainless steel. Heating elements are placed in ribs of the bottom & sides for uniform heating having temp, range 5c above ambient to 250c .air ventilator adjustable fitted on both sides provided with l shape thermometer fixed at front of the oven. Temp, is controlled by thermostat with an accuracy of 1c fitted with main switch, pilot lamp, temp, controlling knob and supplied with perforated shelves and working on 220v 1 phase 50hz a.c.inner chamber sizes:w x h x d305 x 305 x 305mm355 x 355 x 355 mm455 x 455 x 455 mm455 x 605 x 455 mm605 x 605 x 605 mm605 x 905 x 605 mm905 x 905 x 905 mm optional:o air circulating fan :o electronic digital indicator cum temp controllero instead of l shape thermometer.O note: any other size available on request.

We Offer Mini Prism, Mini Prim Assembly, Prism Poles, Range Poles, Target Plates, Tripods & Staffs For Total Stations.

We are offering laser distance measure.The easy solution for precise range findingeasy to operate due to intuitive keypadlarge, illuminated display for the best readabilityrobust ip54 design for tough jobsite conditionswarranty: 6 months warranty on manufacturing defects

Our company offers compression testing machines (concrete), which is hand operated and has a capacity of 250 kn (25 tonne). This is designed so that it efficiently meets the need to test concrete cube for its compressive strength. This equipment is the most simple, economical and reliable means of testing.specifications:compression testing machines is:516, bs 1881-115rsi-091compression testing machine, hand operated, 250 kn (25 tonne), channel model : double plunger pump with hydraulic load gauge.rsi-092compression testing machine, hand operated, 500 kn (50 tonne), channel model : double plunger with hydraulic pressure gauge of0-500 kn capacity.rsi-093compression testing machine, hand operated 1000 kn( 100 tonne), channel model: fitted with double plunger pump with hydraulic load gauge 0-1000 kn capacity.rsi-094compression testing machine, hand operated, 1000 kn (100 tonne), 4- pillar model, fitted with double plunger pump and hydraulic load gauge 0-1000 kn of 200 mm dia. Portable model. Top and bottom fiber cover.

We are offering muffle furnace.Construction:horizontal rectangular body made of thick gauge galvanized sheets powder coated with ceramic fibrewool insulation. Heating elements: made from best quality kanthal al wire covered with ceramic blankets. Temperature range: upto 930c 1200c control accuracy: 1% of fsd temperature control: temperature control by electronic digital temperature controller. Size: size rating exterior dimensions9"x 4"x 4" 1500w 15" x 22" x 23"10" x 5" x 5" 2000w 16" x 23" x 24"12" x 6" x 6" 3500w 17" x 24" x 25"18"x 9"x 9" 6000w 20" x 27" x 29" also available in gmp (fully stainless steel 304 quality) model muffle furnace

We are one of the distinguished manufacturer, exporter and supplier of Dumpy Level in Kolhapur, India. This offered product is manufactured by our well-equipped production unit which make use of latest technology, modern machines and high quality raw materials. The unique design and superior quality ensures high demand in the market. The product has a fine finish and can be made as per the specifications of the customers. We handle wholesale orders of the Dumpy Level at reasonable prices.

Features :

• Superior quality
• Reasonable prices
• Smoothly finished

Our company offers a wide range of concrete mixer & vibrators, which is a commonly used apparatus for preparing a homogeneous mixture of various materials like cement, sand, gravel and mainly used in the construction industry. These are suitable for operation on 440 volts, 3 phase, 50 cycle a.c. Supply.Specifications: rsi-164concrete mixer, laboratory model, motorised: light weight laboratory concrete mixer is designed to remove the burdensome work of hand mixing uniform, thoroughly mixed batches can be produced in the field or laboratory.the counterbalanced mixing drum is easy to tilt. Two cubic feet mix capacity. Total drum volume is 2 cubic feet. Mounted on a sturdy rubber tired stand. Drum is mounted for end discharge. Equipped with end towing pole.suitable for operation on 440 volts, 3 phase, 50 cycle a.c. Supply. Rsi-165o concrete mixer, laboratory model: hand. Rsi-166o needle vibrator :astmc 403 the laboratory needle vibrator is used in vibrating concrete test cylinder and beams in the field or laboratory. O it is also widely used in making laboratory specimens, in making concrete products, in experimental work, and in small scale construction projects. O the vibrator is electrically driven and is easily controlled. O the vibrating pin is 350 mm long and 25mm in dia. Flexible shaft is 1.5 mtr or 4 meter long. Vibrating speed is approx. 10, 000 rpm. Powered by a 1 h.p electric motor. Operation on 440 volts, 3 phase, 50 cycle, a.c. Supply. Rsi-167o needle vibrator, same as per rsi-166, but vibrating pin is 350 mm long and 40 mm dia.

We are the largest manufacturer, exporter and supplier of Mould Vibrating Machine in Kolhapur, India. The vibrator offered by us is mounted over coiled springs. The vibrations are developed by way of a revolving eccentric shaft. They are designed as per the quality standards using the latest technology. The simple design ensures easy assembly and dismantling of the cube moulds. We make sure that only quality approved mould vibrating machine reach the customers.

Specifications :

• Heat of Hydration
• RSI-152
  • Calorimeter : IS : 4031, BS 4550, ASTM C186for Heat of hydration of Cement. Consists of : A open mouthed thermos flask, Beckman Thermometer, Insulating material, Container, Hinge, Stirring Motor, thermometer support, Glass stirring rod, Cork stopper, Reading Lens and glass Funnel.
  • Vibrating Machine - IS: 10080, BS 4550 Consists of a frame mounted on coil springs to carry the cube mould , and a revolving shaft provided with an eccentric.
  • By means of a balance weight beneath the base plate attached rigidly to the frame, the center of gravity of the whole machine, including the cube and mould, is brought either to the eccentric shaft, or within a distance 25mm below it.
  • Normal running speed of eccentric shaft is 12, 000±400RPM. Fitted with BELT GUARD. The motor and a crowned pully on the vibration machine.
  • Supplied complete with one cube mould 7.06 cms with base plate. Suitable for operation on 230 V, single phase, 50 cycle, A.C. supply Complete with timer.
• RSI-153 : Vibrating machine with Digital timer.
• RSI-154
  • Pocking rod. Spares
  • Belt
  • Set of Springs
  • Belt guard
  • Cube Mould, steel 7.06 cms with base plate
  • Time switch 0-5 minute.

We are the largest manufacturer, exporter and supplier of Concrete Test Hammer in Kolhapur, India. This is an instrument which is easy to use for a quick measurement of the resistance to pressure of manufactured concrete structures like building and bridges. The test is fast and is unlikely to cause any damage to the concrete. They are designed and constructed keeping in mind the safety and quality standards of the industry under the guidance of professionals. The hammer is suitable for testing concrete with a comprehensive strength of 10 to 70 N/mm2. They are supplied in safe carrying case with an assurance of prompt delivery.

Specifications :

• RSI-129
• Concrete Test Hammer BS 1881 -202, ASTM C805
• The Method is based on the principal that the rebound of an elastic mass depends on the hardness of the surface which it strikes. The Test is fast & unlikely to cause damage to the concrete.
• The hammer is intended for testing the quality of concrete in finished structures such as buildings and bridges. Supplied complete with carrying case and carborundum stone, the hammer is suitable for testing concrete with Compressive Strengths of 10 to 70 N/mm2.
• Weight 1.4 Kgs. App.

We are engaged in offering thickness & length gauge, which are used in diverse applications such as soil analysis, cement & concrete industry rock & aggregate testing and ceramics. These are also used to measure sample sizes of aggregates, sand and fillers. specifications: determination of flakiness & elongation rsi-203thickness gauge : constructed of heavy gauge sheet steel with chromium plating as per is : 2386 (part-1) rsi-204 length gauge: is : 2386 (part-i) constructed from steel, mounted on a hardwood base.

We are reckoned as the leading manufacturer, exporter and supplier of Laboratory Hot Air Oven in Kolhapur, India. The hot air ovens offered by us are manufactured using top quality raw materials and cutting-edge technology. Our range of product is highly demanded due to the consistent and reliable performance along with strong construction of the hot air oven. They are constructed as per technical specifications under the guidance of professionals which ensures durability and reliability of the product.

Features :

• Best technical specifications
• Strong construction
• Durability

We are a distinguished manufacturer, exporter and supplier of Sokkia Auto Level in Kolhapur, India. This comprehensive range of product offered by us is designed and manufactured using premium grade materials and latest technology. It is based on magnetic damping system that offers outstanding accuracy and reliability. The product passes through various quality checks to ensure only quality approved product reach the customers. We offer calibration and repair services for all Sokkia Auto Levels at competitive prices.

We have established ourselves as the largest manufacturer, exporter and supplier of Vernier Transit Theodolite in Kolhapur, India. The offered product is manufactured by our professionals using high-grade materials and latest technology in adherence to quality standards and norms. Our skilled team of professionals test them on various parameters in order to confirm its flawlessness. The rugged design, compact size and user friendliness has led to high demand for them in the market. The product can be availed from us at reasonable prices.

Features :

• Rugged design
• Compact size
• User friendliness

Other Details :

• Direct reading vernier transit theodolite with 10 sec accuracy
• Direct reading theodolite with 20 sec accuracy
• All models made of full brass/gun-metal body having pure silver circles
• Shifting tribeach and optical

We are an established manufacturer, exporter and supplier of Topcon Gowin Total Station in Kolhapur, India. They are manufactured as per the international quality standards and norms. This ensures durability, reliability and a long life to the product. Our quality control team ensures that only quality approved products reach the client. The product is ideal for jobs requiring accuracy and versatility of a high-quality total station. They are widely demanded as it is perfect for demanding surveys and measuring tasks. The product can be availed from us at reasonable prices.

The Topcon Gowin Total Station TKS-202 Provides An Accurate, Low Cost Measuring Solution Featuring :

• 2″ Angle Accuracy Provides 1/16th Of An Inch Accuracy At 1, 000ft.
•  Dual Keyboards With And Expanded Numeric Keypad For Faster Data Input.
• Accurately Measure Up To 2, 000m With A Single Prism.
• Internal Data Storage For Up To 24, 000 Points.
• Single Axis Compensator With ±3′ Compensating Range.
• IP54 Environmental Protection Rating.
• With A Full Alpha-Numeric Keypad And Onboard Memory That Will Hold Up To 24, 000 Points, A 14-Hour Li-On Battery Life, And An IP54 Environmental Rating, The Topcon Gowin Total Station TKS-202 Is A Full-Featured Instrument Designed To Meet The Most Rugged Demands.
• Onboard Software Includes Functions Such As Road, Missing Line Measurement And Resection. For Added Efficiency, It Is Compatible With All Current Topcon® And Sokkia® Field Controllers With A GTS Series Conventional Total Station Driver Installed.

We are a distinguished manufacturer, exporter and supplier of Concrete Testing Equipment in Kolhapur, India. The range of equipment offered by us includes compression testing machine, concrete test hammer, flow table, laboratory cement autoclave, vibrating machine length comparator, and many more. This testing equipment has been proven to deliver optimum performance and we offer them in standard client defined specifications. They are easy to use and are designed keeping in mind international quality standards. We supply the concrete testing equipment within the stipulated time at an affordable price and provide timely after sale services as well.

We are an esteemed manufacturer, exporter and supplier of Test Sieves in Kolhapur, India. we are engaged in offering a wide range of sieves which are manufactured using high polished brass spun frame without any joint, Endicott pattern, double folded bottom, beading at top and tightly fitted to each other. We ensure that only quality approved products reach the clients. We provide them in various sizes and diameters as per the requirements of the client.

Specifications :

• RSI-240
• Standard Test Sieves
• Fine Mesh Test Sieves  - Diameter 20cm/30/45 cm. Made from high polished brass spun frame without any joint, Endicott pattern, double folded bottom, beading at top and tightly fitted each other:
  • Lid and Pan for above made of brass, joint less, 20 cm dia
  • Lid and Pan for above made of brass, joint less, 30 cm dia

• Coarse Test Sieves - Diameter 20 cm. Made of high polished brass spun frame. Fitted with steel perforated square openings.
• Sieves Designation - 100 mm, 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25 mm, 20 mm, 16 mm, 12.5 mm, 10 mm, 8 mm, 6.3 mm & 4.75 mm. L & P.
• Coarse Test Sieves - Diameter 30 cms. Brass frame with steel perforated Square openings. 100 mm, 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25mm, 20 mm, 16mm, 12.5 mm, 10mm, 8 mm, 6.3 mm & 4.75 mm. Lid and pan for 30 cms dia.
• Coarse Test Sieves - Diameter 30 cms. Brass frame with steel perforated Square openings without Joint. Fitted with steel perforated square opening 100 mm, 80 mm, 63 mm, 50 mm, 40 mm, 31.5 mm, 25 mm, 20 mm, 16 mm, 12.5 mm, 10mm, 8 mm, 6.3 mm & 4.75 mm. Lid and pan for 30 cms. Without Joint.
• Coarse Test Sieves - Diameter 300 mm G.I. Sheet frame with joint & fitted with steel perforated square openings. 125 mm, 106 mm, 90 mm, 75mm, 63 mm, 53 mm, 45 mm, 37.5 mm, 26.5 mm, 22.4 mm, 19 mm, 13.2 mm, 11.2 mm, 9.5 mm, 6.7mm, 5.6 mm with Lid and Pan.
• Coarse Test Sieves - Diameter 450mm GI. Sheet frame with joint & fitted with steel perforated square openings. 125 mm, 106 mm, 90 mm, 75mm, 63 mm, 53 mm, 45 mm, 37.5 mm, 26.5 mm, 22.4 mm, 19 mm, 13.2 mm, 11.2 mm, 9.5 mm, 6.7mm, 5.6 mm Lid and Pan.

We are regarded as the leading manufacturer, exporter and supplier of Concrete Compression Testing Machine in Kolhapur, India. The offered machine is available in both manual and electrical configuration. The machine has high stability and durability. They are designed keeping in mind quality standards and norms. The machines can be availed from in various dimensions as per the specification of the client.

Specifications :

• RSI-095
  • Compression Testing Machine, hand operated, 2000 Kn (200 tonne),
  • Channel Model: Fitted with double plunger pump and hydraulic Load gauge 0-2000 KN cap

• RSI-096
  • Compression Testing Machine, hand operated, 2000 KN (200 tonne), 2 or 4 Pillar model, with separate pumping unit connected by a copper/rubber hose pipe, double plunger with pressure gauge 0-2000 KN capacity.

• RSI-097
  • Compression Testing Machine, 250 KN (25 tonne) Electrically-cum-manually operated. Two Four/Pillar Model. "
  • Compression Testing Machine, 500 KN (50 tonne) Electrically-cum-manually operated.

• RSI-099
  • Compression Testing Machine, 1000 KN (100 tonne) cap.
  • Electrically-cum-manually operated. 2 or 4 Pillaar Model

• RSI-100
  • Compression Testing Machine, 1000 KN (100 Tonne)cap. Electrically-cum manually operated. 2 or 4 Pillar Model : with two pressure gauges i.e. 0-500 KN x 2.5 KN divn. and 0-1000 KN x 5 KN/ divn.

• RSI-101
  • Compression Testing Machine, 2000 KN (200 Tonne) cap. Electrically-cum-manually operated. 2 or 4 pillar model.

• RSI-102
  • Compression Testing Machine, 2000 KN. (200 tonne) cap.,
  • Electrically-cum-manually operated with two
  • Load gauges 2 or 4 Pillar Model. 0-1000 KN x 5 KN/divn. and 0-200KN x 10 KN/divn.

• RSI-103
  • Compression Testing Machine, 2000 KN (200 tonne) cap.,
  • Electrically-cum-manually operate with 3gauges. 2 or 4 Pillar MODEL. 0-500 KN x 2.5 KN, 0-1000 KN x 5 KN/div. and 0-2000 KN x 10 KN/divn.

• RSI-104  
  • Compression testing Machine. Digital 2000 KN x 1 KN least count.                      
  • RSI series Compression Testing machine are the finest of there type obtainable. The rugged construction & extreme simplicity make it possible for even non-technical personnel to operate them with ease and complete dependability. RSI Compression Testing Machine conform to the requirements international Standards like BS ASTM & Indian Standard IS:516.

 

Some Salient Features :

• High Stability,
• Self Aligning
• Platen Suitable for Testing Cubes and Cylinders of various sizes,
• Brick can also be tested,
• Digital having function of peak hold facility, memory status,
• automatic cutoff of maximum Load, Alarm generated when the sample breaks down,
• Cubes of size 50 mm - 200 mm can be tested, Cylinders 100 mm x 200 mm ht.& 150 mm dia. x 300 mm ht. can be tested.   

 

Note : You can get Digital Readouts in all Machines cap. 250 KN to 3000 KN.

We are one of the top manufacturers, exporters and suppliers of Cube Moulds in Kolhapur, India. The moulds help in testing the properties of the hardened concrete. The offered moulds are designed and manufactured as per the standards of the industry. The fine finish and tight dimensions lead to the best result every time. We provide them in proper packages that ensure safe and prompt delivery. We specialise in wholesale orders with an assurance of damage-free delivery.

Specifications :

• Complete with base plate. The faces of the mould are machined flat to /- 0.02mm accuracy and finished to within - 0.2mm of specified dimensions. Material for construction of moulds is Cast Iron or Mild steel.
• The moulds are stout enough to prevent distortion and facilitate the removal of the moulded specimen without damage.
• The Moulds are so machined that when they are assembled ready for use, the dimensions and internal faces are accurate within the specified limits. Internal faces of the moulds are smooth.The base plate is attached to the mould by cleats .
• The parts of the mould, when assembled, are positively and rigidly held together during filling, subsequent handling and vibration where applicable.
• Sizes Available - 50 mm/ 100 mm/ 150 mm

Optional Accessories :

• Spanner for demoulding and moulding
• Tamping rod with sauqre face
• Cube mould 7.06 cms:
• As per IS: 10086-1982, The cube mould is so constructed so as to facilitate separation into two parts. The mass of the mould together with the base plate will be 2.8 /- 0.2 kg. Material for construction of these moulds is mild steel.

Beam Moulds :

• For casting concrete specimens for flexural tests.
• The mould is made of 4 plates assembled together. Each mould with base plate, made of Mild Steel. Faced are machined flat to /-0.2mm and finished in size to 0.2mm. AS PER IS: 516

We are one of the most reputed manufacturers, exporters and suppliers of Aluminium Telescopic Stand in Kolhapur, India. The stand is manufactured and designed using premium grade aluminium using the latest technology. They are viable in various dimensions and can be availed from us at affordable prices. The quality control team ensures that only quality approved stands reach the market. We supply them in safe packages that promise defect-free delivery.

 

Features :

• Made of Aluminium body Telescopic in 3 PCS, 4 meter in length packed in canvas cover, graduated in meters, dm, cm, and mm with background and black strips. 5 mm thick with suitable locking arrangement
• Made of Aluminium body / Metalic Body folding in 2 PCS, 4 meter in length graduated in meters, dm, cm and mm. with white background and black strips. 5mm thick with suitable folding & locking arrangement.
• Improved soap with pattern is made of best quality well seasoned teak wood, Telescopic in three pieces, brass fitting and glued, thus greatly increasing its strength, stability and durability,
• Accurately machine divided and engraved to read 5 mm. painted and polished.
• Size 4 meters. Long
• Size 5 meters. Long
• Size 6 meters. Long.
• Tripod

Available in many Ranges :

• Wooden Tripod Sizes: Full Length: 1828mm, 1760mm, 1700mm, 1600mm, 1550mm. Min. Length: 1168mm, 1090mm, 1070mm, 1000mm, 950mm.
• Fiber-Glass Tripod Sizes: Full Length: 1850mm. Min. Length:1150mm.
• Fiber-Wooden Tripod Sizes: Full Length: 1760mm. Min. Length:1090mm.
• Aluminum Tripod Sizes: Full Length: 1650mm, 1655mm, 1655mm, 1800mm, 1700mm. Min. Length: 970mm, 1025mm, 1030mm, 1045mm, 1000mm
• Elevating Tripod Sizes: Full Length: 2850mm. Min. Length:1250mm.

Based in Kolhapur, India, we are one of the leading manufacturer, exporter and supplier of Length Gauges. They are used widely in various applications like soil analysis, cement and concrete industry, rock testing and ceramic testing. They are designed as per the international quality standards using the latest technology. The gauges are used to measure sample sizes of aggregates, sand and filters effectively. The length gauges can be availed from us at leading market prices and we promise to deliver within the stipulated time.

Specifications:

• Determination of flakiness & elongation
• RSI-203
• Thickness Gauge
• Constructed of heavy gauge sheet steel with chromium plating as per IS : 2386 (Part-1)
• RSI-204
• Length Gauge - IS : 2386 (Part-I) Constructed from steel, mounted on a hardwood base.

We are offering oven.Our thermostatically universal ovens are double walled and the exterior is constructed from mild steel finished in powder coated paint. These are available with various options such as air circulating fan, electronic digital indicator cum temp controller an instead of l shape thermometer. specifications: rsi-241thermostatically universal oven bs:2648, 1881, 598, 1377 & 1924.double walled, exterior is constructed from m.steel finished in powder coated paint. with glass wool insulation between two walls. Inner wall made of aluminium stainless steel. Heating elements are placed in ribs of the bottom & sides for uniform heating having temp, range 5c above ambient to 250c .air ventilator adjustable fitted on both sides provided with l shape thermometer fixed at front of the oven. Temp, is controlled by thermostat with an accuracy of 1c fitted with main switch, pilot lamp, temp, controlling knob and supplied with perforated shelves and working on 220v 1 phase 50hz a.c.inner chamber sizes:w x h x d305 x 305 x 305mm355 x 355 x 355 mm455 x 455 x 455 mm455 x 605 x 455 mm605 x 605 x 605 mm605 x 905 x 605 mm905 x 905 x 905 mm optional:o air circulating fan :o electronic digital indicator cum temp controllero instead of l shape thermometer.O note: any other size available on request.

We Offer Mini Prism, Mini Prim Assembly, Prism Poles, Range Poles, Target Plates, Tripods & Staffs For Total Stations.

We are offering laser distance measure.The easy solution for precise range findingeasy to operate due to intuitive keypadlarge, illuminated display for the best readabilityrobust ip54 design for tough jobsite conditionswarranty: 6 months warranty on manufacturing defects

Our company offers compression testing machines (concrete), which is hand operated and has a capacity of 250 kn (25 tonne). This is designed so that it efficiently meets the need to test concrete cube for its compressive strength. This equipment is the most simple, economical and reliable means of testing.specifications:compression testing machines is:516, bs 1881-115rsi-091compression testing machine, hand operated, 250 kn (25 tonne), channel model : double plunger pump with hydraulic load gauge.rsi-092compression testing machine, hand operated, 500 kn (50 tonne), channel model : double plunger with hydraulic pressure gauge of0-500 kn capacity.rsi-093compression testing machine, hand operated 1000 kn( 100 tonne), channel model: fitted with double plunger pump with hydraulic load gauge 0-1000 kn capacity.rsi-094compression testing machine, hand operated, 1000 kn (100 tonne), 4- pillar model, fitted with double plunger pump and hydraulic load gauge 0-1000 kn of 200 mm dia. Portable model. Top and bottom fiber cover.