We provide optimum quality AMF panels which are known for its durability and reliability. The AMF PANEL which our company provides is extremely efficient and rust resistant. Auto main failure panel, is a unit designed based on microprocessor / programmable logic controller. Whenever the mains fail or healthy, it gives the command to the dg to auto start or to auto stop.

• Optimization of chillers, pumps and cooling towers
• Energy management & performance contracting
• Process control
• Real time power monitoring

• When mains are healthy, DGS remain in the standby mode & when fails the master dg set get start automatically as per selection made
• It checks the voltage is healthy for the dg and gives command to the dg-breaker to close the circuit.
• It gives corresponding pulses to start load automatically.
• The load is then sensed by kw transducer & dg parameters are continuously monitored.
• In case of any fault the breaker is tripped & engine is stopped
• It the load reaches & crosses 80% or as per selection of the related capacity of the first dg, then starting pulses are given to the second dg.
• If voltage is healthy then the breaker-2 gets closed
• After closing the second breaker, auto load sharing function starts between the two GE sets
• The percentage of sharing is directly proportional to their individual capacities.
• before synchronizing it is required to match the frequencies, phase angles & voltages of both the dg set necessarily

Our company manufactures high grade Power Distribution Boards which are used in a huge number of industries to distribute direct current to different applications. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness. Power distribution panel generally also known as distribution boards is a combined unit designed according to the number of outgoing supply from a single source having a common power bus.

• These have standardized verticals & feeder sizes with bolted partition trays & mounting plates
• It provides ease of maintenance & replacement and the SMC supports for bus bar system
• The bus bar system designed to withstand short circuit forces of 50 KA, 1 Sec
• Prototype type tested at CPRI
• The authorized vendors of M/s L & T Ltd.& M/s ABB Ltd. for manufacturing of LT panels, such as PCC, PDB, MCC

Customer Specific Adaptability	Based on latest technologies
Better efficiency	Excellent performance
Powder coated	Cost Effective
Expandable Ends.	Dust & Vermin Proof

• Protection & Control of Power Distribution
• Utility
• Chemical
• Oil and gas

Our company manufactures a wide range of Capacitor Panels which are fabricated using the best quality raw material which ensures that they are dust and vermin proof and highly durable. These panels are power coated to give them a longer shelf life and their wiring is done as per international standards. These panels consists of a power factor controller that accurately monitors reactive power in power systems in order to save energy. These are also used to monitor the power factor of various electrical systems.

• Your utility bill will be smaller
• Low power factor requires an increase in the electric utilitys generation and transmission capacity to handle the reactive power component caused by inductive loads
• Utilities usually charge a penalty fee to customers with power factors less than 0.95
• You can avoid this additional fee by increasing your power factor
• Your electrical systems branch capacity will increase
• Uncorrected power factor will cause power losses in your distribution system
• You may experience voltage drops as power losses increase
• Excessive voltage drops can cause overheating and premature failure of motors and other inductive equipment

• Suitable for Low PF Feeders
• All types of Industries Rolling Mills, Sugar Mills, OEM
• Commercial buildings & malls, Real estate
• Service Industry
• Hotels
• Hospitals
• Education Center etc

We provide optimum quality AMF panels which are known for its durability and reliability. The AMF PANEL which our company provides is extremely efficient and rust resistant. Auto main failure panel, is a unit designed based on microprocessor / programmable logic controller. Whenever the mains fail or healthy, it gives the command to the dg to auto start or to auto stop.

• Optimization of chillers, pumps and cooling towers
• Energy management & performance contracting
• Process control
• Real time power monitoring

• When mains are healthy, DGS remain in the standby mode & when fails the master dg set get start automatically as per selection made
• It checks the voltage is healthy for the dg and gives command to the dg-breaker to close the circuit.
• It gives corresponding pulses to start load automatically.
• The load is then sensed by kw transducer & dg parameters are continuously monitored.
• In case of any fault the breaker is tripped & engine is stopped
• It the load reaches & crosses 80% or as per selection of the related capacity of the first dg, then starting pulses are given to the second dg.
• If voltage is healthy then the breaker-2 gets closed
• After closing the second breaker, auto load sharing function starts between the two GE sets
• The percentage of sharing is directly proportional to their individual capacities.
• before synchronizing it is required to match the frequencies, phase angles & voltages of both the dg set necessarily

Our company manufactures high grade Power Distribution Boards which are used in a huge number of industries to distribute direct current to different applications. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness. Power distribution panel generally also known as distribution boards is a combined unit designed according to the number of outgoing supply from a single source having a common power bus.

• These have standardized verticals & feeder sizes with bolted partition trays & mounting plates
• It provides ease of maintenance & replacement and the SMC supports for bus bar system
• The bus bar system designed to withstand short circuit forces of 50 KA, 1 Sec
• Prototype type tested at CPRI
• The authorized vendors of M/s L & T Ltd.& M/s ABB Ltd. for manufacturing of LT panels, such as PCC, PDB, MCC

Customer Specific Adaptability	Based on latest technologies
Better efficiency	Excellent performance
Powder coated	Cost Effective
Expandable Ends.	Dust & Vermin Proof

• Protection & Control of Power Distribution
• Utility
• Chemical
• Oil and gas

Our company manufactures a wide range of Capacitor Panels which are fabricated using the best quality raw material which ensures that they are dust and vermin proof and highly durable. These panels are power coated to give them a longer shelf life and their wiring is done as per international standards. These panels consists of a power factor controller that accurately monitors reactive power in power systems in order to save energy. These are also used to monitor the power factor of various electrical systems.

• Your utility bill will be smaller
• Low power factor requires an increase in the electric utilitys generation and transmission capacity to handle the reactive power component caused by inductive loads
• Utilities usually charge a penalty fee to customers with power factors less than 0.95
• You can avoid this additional fee by increasing your power factor
• Your electrical systems branch capacity will increase
• Uncorrected power factor will cause power losses in your distribution system
• You may experience voltage drops as power losses increase
• Excessive voltage drops can cause overheating and premature failure of motors and other inductive equipment

• Suitable for Low PF Feeders
• All types of Industries Rolling Mills, Sugar Mills, OEM
• Commercial buildings & malls, Real estate
• Service Industry
• Hotels
• Hospitals
• Education Center etc