RASHMI ELECTRICALS

Nehru Nagar, Ghaziabad, Uttar Pradesh

We provide optimum quality AMF panels which are known for its durability and reliability. The AMF PANEL which our company provides is extremely efficient and rust resistant. Auto main failure panel, is a unit designed based on microprocessor / programmable logic controller. Whenever the mains fail or healthy, it gives the command to the dg to auto start or to auto stop.

• Optimization of chillers, pumps and cooling towers
• Energy management & performance contracting
• Process control
• Real time power monitoring

• When mains are healthy, DGS remain in the standby mode & when fails the master dg set get start automatically as per selection made
• It checks the voltage is healthy for the dg and gives command to the dg-breaker to close the circuit.
• It gives corresponding pulses to start load automatically.
• The load is then sensed by kw transducer & dg parameters are continuously monitored.
• In case of any fault the breaker is tripped & engine is stopped
• It the load reaches & crosses 80% or as per selection of the related capacity of the first dg, then starting pulses are given to the second dg.
• If voltage is healthy then the breaker-2 gets closed
• After closing the second breaker, auto load sharing function starts between the two GE sets
• The percentage of sharing is directly proportional to their individual capacities.
• before synchronizing it is required to match the frequencies, phase angles & voltages of both the dg set necessarily

Our company offers Power Control Center (PCC) to clients, which are an innovative method for storing all electrical equipments for installation easily. The control centers are modular, and are designed, wired, tested with all the electrical equipments installed inside it. A power control center (PCC), is an assembly of one or more enclosed sections having a common power bus and principally containing power control units. It is a centralized unit to mange power coming from 2 or more power sources considering various protections or interlocking as required.

• Short Circuit Withstand
• Temp Rise Withstand
• Deg. Of Protection

• Protection & Control of Power Distribution
• Utility
• Chemical
• Oil and gas

• Dust resistant
• Vermin proof
• Rust resistant
• Expandable ends
• Excellent performance
• Powder coated

Our company offers optimum quality Motor Control Center (MCC) that are used with motors to protect against short circuits and overloads. Manufactured using the finest raw materials, these Motor Control Centers are widely used in various electronic applications. Modular design of our motor control centers are designed to deliver dependable service for years. It comprises of industry-leading solutions such as smart components, network communications and compact AC variable frequency drives, our motor control centers are widely accepted across industries.

• A contactor or a solid-state motor controller
• Overload relays to protect the motor
• Control transformers
• Pilot lamps
• Control switches
• Extra control terminal blocks
• Bi-metal and solid-state overload protection relays
• Power fuses
• A circuit breaker to provide short-circuit protection
• A disconnecting switch to isolate the motor circuit
• Three-phase power through separable connectors
• The motor is wired to terminals in the controller
• Motor control centers provide wire ways for field control and power cables

• Operational Current- 4000 A
• Operational Voltage- 415 V
• Rated Insulation Voltage- 690 V
• Ambient Temperature- 45 Deg. C
• Ambient Temperature-45 Deg. C
• Degree of Protection- IP:54
• Configuration-Fixed & Draw out

• Short Circuit Withstand
• Temp Rise Withstand
• Deg. Of Protection

• Baked
• Dry powder epoxy coating on all metal surfaces except structural steel base
• SIEMENS GREY
• RAL 7032
• COMBINATION OF BLUE & GREY

Our company manufactures high grade Power Distribution Boards which are used in a huge number of industries to distribute direct current to different applications. These power distribution boards are built in a way so as to ensure maximum safety, along with maximum space utilization and cost effectiveness. Power distribution panel generally also known as distribution boards is a combined unit designed according to the number of outgoing supply from a single source having a common power bus.

• These have standardized verticals & feeder sizes with bolted partition trays & mounting plates
• It provides ease of maintenance & replacement and the SMC supports for bus bar system
• The bus bar system designed to withstand short circuit forces of 50 KA, 1 Sec
• Prototype type tested at CPRI
• The authorized vendors of M/s L & T Ltd.& M/s ABB Ltd. for manufacturing of LT panels, such as PCC, PDB, MCC

Customer Specific Adaptability	Based on latest technologies
Better efficiency	Excellent performance
Powder coated	Cost Effective
Expandable Ends.	Dust & Vermin Proof

• Protection & Control of Power Distribution
• Utility
• Chemical
• Oil and gas

Terminal Box we supply using high quality raw material. These boxes are used for termination of secondary telephone network to the subscriber drop or service line cable pairs. Terminal Boxes for Distribution Point are suitable for internal wall mounting and external wall or poll mounting applications. As an optional feature, gas discharge tube can be installed for over voltage protection.

• Based on latest technologies
• Better efficiency
• Excellent performance
• Powder coated
• Cost Effective

• Protection & Control of Power Distribution
• Utility
• Chemical
• Oil and gas

DC Drive panels offered by us are highly durable and rust resistant. Our DC panels are manufactured using high quality material and electrical components procured from quality conscious manufacturers. This allows us to deliver optimum functionality based drive panels that help in monitoring of machines and delivering superior on-site operator control of machines.

• Suitable for Low PF Feeders
• All types of Industries Rolling Mills, Sugar Mills, OEM etc.
• Commercial buildings & malls, Real estate,
• Service Industry
• Hotels
• Hospitals
• Education Center etc

Electric Feeder Pillars are used to terminate and distribute the control circuit and are used in various industries such as telecom, electrical, electronics and others. These have been designed and developed with latest technology to offer maximum satisfaction to our valued clients.These industrial feeder pillars are sufficient to meet different needs for a robust external enclosure for the termination and distribution of control circuits. We can also provide customized solutions to our clients to fulfill their requirements.

• Street Light Feeder Pillars
• Distribution Feeder Pillars
• Stainless Steel Feeder Pillars
• Low Voltage Feeder Pillars
• Many other Applications

• Shock Proof
• Easily installed
• Low maintenance
• Accurate functioning
• Water proof

The wide range of Bus Ducts which our company provides are highly durable and reliable. It consists of an electrical rising main which is available in 415V segregated bus duct, non segregated bus duct forms manufactured from high grade raw material; these electric bus ducts are quality tested o well defined quality parameters before being delivered to our clients based across the nation. We also meet customized requirement and offer these at competitive prices.

• Reliable
• Durable
• Cost-effective prices
• Customer Specific Adaptability
• Based on latest technologies
• Better efficiency
• Excellent performance

• All types of Industries Rolling Mills, Sugar Mills, OEM
• Commercial buildings & malls, Real estate
• Service Industry
• Hotels
• Hospitals

Our company manufactures a wide range of Capacitor Panels which are fabricated using the best quality raw material which ensures that they are dust and vermin proof and highly durable. These panels are power coated to give them a longer shelf life and their wiring is done as per international standards. These panels consists of a power factor controller that accurately monitors reactive power in power systems in order to save energy. These are also used to monitor the power factor of various electrical systems.

• Your utility bill will be smaller
• Low power factor requires an increase in the electric utilitys generation and transmission capacity to handle the reactive power component caused by inductive loads
• Utilities usually charge a penalty fee to customers with power factors less than 0.95
• You can avoid this additional fee by increasing your power factor
• Your electrical systems branch capacity will increase
• Uncorrected power factor will cause power losses in your distribution system
• You may experience voltage drops as power losses increase
• Excessive voltage drops can cause overheating and premature failure of motors and other inductive equipment

• Suitable for Low PF Feeders
• All types of Industries Rolling Mills, Sugar Mills, OEM
• Commercial buildings & malls, Real estate
• Service Industry
• Hotels
• Hospitals
• Education Center etc