Gem Precision Tool (P) Ltd.

Sidhapudur, Coimbatore, Tamil Nadu

Gem Pull studs are shot peened to relieve stress in the material, remove burrs, radius corners, and improve the finish of the knob. This process improves the durability, extends the life and reduces the likelihood of the pull stud cracking. Improper choice of a pull stud can cause damage to your machine spindle, the tool holder, and can cause a serious safety hazard. Advantages of Pull studs The advantages of Gem Pull Studs are: Uses replaceable hardened steel inserts Safety & easily installsremoves pull stud retention knobs Fast - self aligning, non-slip design minimizes damage to pull studs Increases tooling flexibility and reduces tooling inventory Saves time and aggravation.

The advantages of Gem Pull Studs are:

• Uses replaceable hardened steel inserts
• Safety & easily installs/removes pull stud retention knobs
• Fast - self aligning, non-slip design minimizes damage to pull studs
• Increases tooling flexibility and reduces tooling inventory
• Saves time and aggravation

The benefits of Gem Pull Studs are:

• Our pull studs are manufactured with the best steel that ensures minimum wear and guarantees a tough inner core that resists the normal wear and tear caused by a CNC machine
• Most often, a retention knob is added at the tail of the taper, where it can be clamped by levers from the outside and drawn axially into the spindle nose
• Great for run out accuracy, balance repeatability and machine tool draw bar consistency
• Higher-quality retention knobs will resist wear and deformation better, and they will also locate more accurately on the toolholder's center line
• Another common option is a threaded bolt built in as part of the spindle that can be activated to screw or unscrew the toolholder

We are the manufacturer and wholesale supplier of Feed Finger Collets from Coimbatore, Tamil Nadu, India. The high quality Feed Finger Collets we offer are used predominantly in multi spindle automatics. Our collets are manufactured to suit any make, model and size of multi spindle automatics. We offer these collets based on your requirement by collecting samples and drawings from the customer. Avail these higher clamping force and wear resistant Feed Finger Collects from us at low prices.

The advantages of using Gem collets and feed fingers for Multi Spindle Automatics are :

• Higher clamping force
• Wear resistant
• Large chucking diameter range

The benefits of Gem collets and feed fingers for Multi Spindle Automatics are :

• You can save the time on Quickly Changing over the spindles.
• Higher Return on Investment
• Parts are not subjected to a stack-up of tolerances due to multiple chuckings

We are listed as one of the leading manufacturer and wholesale supplier of Button Collets based in Coimbatore, Tamil Nadu, India. Our Button Collets that are manufactured precisely using modern machineries are used mainly in button manufacturing industries. We manufacture and supply collets along with ejector pins in various sizes according to customers requirements. We also supply punching cutters along with the button collect at reasonable prices.

We are the manufacturer and wholesale supplier of Quick Change Adapter from Coimbatore, Tamil Nadu, India. The advantages of our Quick Change Adapter are :
Place the order in bulk to get in delivered promptly. We also offer these products at reasonable prices to our esteemed customers.

Advantages of Quick change Adapter

• No tools required for quick changeover.
• Keyed for accurate location.
• Positive stop screw for repeatable location.
• Manufactured to machine tool tolerances.
• Higher feed rates.

Benefits of Quick change Adapter

• Makes switching between drilling pilot holes and driving screws quick and easy.
• Long length hex shank for fast loading.
• Internal hex drive eliminates slippage.
• The recessed black sleeve prevents accidental release of your bits.

Toggle / Clamping Levers can be supplied for all types of Single and Multi Spindle automatics. We can also manufacture toggle levers for all types of machines if the customer provides the drawing or the sample.

We are a reputed manufacturer and wholesale supplier of Toggle Clamping Levers based in Coimbatore, Tamil Nadu, India. The Toggle Clamping Levers we offer are supplied for all types of single and multi-spindle automatics. We can also manufacture toggle clamping levers for all types of machines based on the customers requirement. We take sample drawing for better product manufacture. Avail these products from us at exclusive prices.

We are the leading manufacturer and wholesale supplier of Single Spindle Collets from Coimbatore, Tamil Nadu, India. The Single Spindle Collets are manufactured in our units using premium quality raw materials to ensure that we deliver products that showcases high performance and durability. We offer these products at market leading prices to our clients with the assurance to deliver the products in the stipulated time frame.

The advantages of Gem Single spindle Automatics are :

• Higher spindle speeds for carbide tooling
• Higher surface finishes
• Improved tool life
• Better machining tolerances
• Covers larger bar diameter variations
• Improves spindle bearing life
• Reduces noise and vibrations
• Substantially quieter running of profile bars

The benefits of Gem Single spindle Automatics are :

• A straightening attachment and adjustable guide bushing are also included
• It has thread whirling and other multi-axis functions necessary to produce complex medical components

We are the leading and most trusted manufacturer and wholesale supplier of Die Grinding Collets based in Coimbatore, Tamil Nadu, India. We are predominant in supplying any type of Die Grinding Collets according to the customer's requirements. The wide range of readily available grinding collets is suitable for Consolidated Pneumatics, Applied Pneumatics, Wadco and Southern Industrial Corporation. Apart from these we also manufacture collets in accordance with your needs.

Gem can supply any type of Die Grinding Collets according to the customer's requirements. Presently we manufacture Die Grinding Collets suitable for :

• Consolidated Pneumatics (CP make)
• Wadco
• Applied Pneumatics (AP make)
• Southern Industrial Corporation (SIC)

To manufacture customised die grinding collets kindly send us the drawing or the sample.

We are the eminent manufacturer, wholesale supplier of DIN 6499 Collets based in Coimbatore, Tamil Nadu, India. These Collets are used to hold small diameter work pieces and small diameter milling cutters. Our DIN 6499 Collets are compatible with materials that are .001 inches over the collets size and .004 inches under the collets size. We manufacture collets of standard sizes and are also ensure the availability of sizes as required by the clients.

The advantages of Gem Collets are :

• Tools can be loaded quickly
• Collets are very accurate
• Maximum spindle speeds can be used
• Compatible with all vertical machining centers and vertical milling machines

The benefits of Gem Collets are : Vibration Dampening

• One of the benefits realized from a high-speed collet system is vibration dampening. The collet toolholder’s vibration dampening yields many benefits including longer tool life, superior surface finish and less wear on the spindle—thereby increasing its life.

Accurate finish

• Gem Collet have a flat shoulder design for heightened perpendicular force transfer, which eliminates the potential for twisting of the collet that can thereby add inaccuracies as it is tightened.

High speed

• High-performance collet toolholder is balanced for operating at up to 40, 000 rpm, allowing it to offer the ultimate in high speed, high accuracy and ultra smooth surface finishes.

Applications

• The Gem collets are quick, clamp on a high percentage of the part surface, they don't have pressure points and they run very concentrically
• Ideal for batch production of secondary operations using multiple spindles or in shops for prototyping
• Collets allows a small part to be extended well into the cutting area, avoiding the potential for interference with the tooling or spindle nose

We are the manufacturer and wholesale supplier of Morse Taper Holder based in Coimbatore, Tamil Nadu, India. We manufacture Morse Taper Holders which are famous in the world-wide market for its high efficiency and durability. The holders are equipped with two clearance notches, cold and heat treated to make them hardened and prcised. Avail these products from us at market leading prices.

Advantages of Morse Taper Holder

• Precision ground Morse taper
• Morse taper pocket held to .0002" accuracies for the best locking fit for the Morse shank
• Not for high speed use
• Can be cleaned before use and degreased for proper assembly

Benefits of Morse Taper Holder

• Better shank taper - accurate, rigid toolholder-to-spindle mount
• Less tool wear and replacement - less scrap
• Fully ground flange and V-groove, easy on the tool changers for less spindle and changer maintenance
• All tapers and lengths ready to ship, get your tools fast

We are the manufacturer and wholesale supplier of premium quality Side & Face Cutter Arbor from Coimbatore, Tamil Nadu, India. We manufacture Side and Face cutter Arbor with high quality steel and ensure the maximum productivity of the products. Avail these products at market leading prices from us with the assurance to deliver the products in the stipulated time frame. We also deliver these products safely by using premium quality packing materials.

We are the leading manufacturer and wholesale supplier of End Mill Holder based in Coimbatore, Tamil Nadu, India. We manufacture end mill holder with high quality performance and versatility. The high accuracy of our holders ensure that cutting tools stay on centerline, distributing the chip load evenly and significantly, which eventually extends the life of cutting tool. Place bulk order to get the product at exciting prices.

The advantages of Gem End Mill Holders are :

• Material can be loaded quickly
• Excellent "quick-change"
• Less cutting pressure
• Less deflection and improved finish
• Better Fit between insert and holder

The benefits of Gem End Mill Holders are:

• Deliver faster cycle times, longer tool life, better surface quality and lower cost
• Better surface finishes mean less benching and polishing
• Tool holders have an h5 bore tolerance for optimum cutting tool surface contact
• Our end mill holders are balanced by design and guaranteed to G6.3@10, 000rpm

We are the eminent manufacturer and wholesale supplier of Drill Chuck Holder from Coimbatore, India. We offer all working parts that are ground and hardened to exact specifications for lasting accuracy and long life. The unique features of our products include interchangeability of parts, special thrust bearing, and use in precision work as well as for heavy duty drilling, convenient hand locking, self-tightening and strength metal to ensure a long service life.

The advantages of Gem Drill chuck holder are:

• All working parts ground and hardened to exact specifications for lasting accuracy and life
• Every part interchangeable
• Special thrust bearing
• For precision work as well as for heavy duty drilling
• Convenient hand locking, self-tightening
• Strength metal to ensure a long service life

The benefits of Gem Drill chuck holders are:

• Specially engineered for heavyduty close tolerance production drilling
• Ideal for use on jig borers, milling machines, lathes and radial drill presses
• Ball bearing construction maximizes gripping force and drilling accuracy
• Jaws are centerground for absolute straightness and alignment
• All working components are hardened for maximum wear resistance
• Uni-body construction to achieve maximum rigidity

We are the most sought-after manufacturer and wholesale supplier of pull studs from Coimbatore, Tamil Nadu, India. Our gem pull studs shot peened to relieve stress in the material, remove burrs, radius corners, and improve the finish of the knob. Our products undergo processes to improve durability, longevity, and reduce the likelihood of the pull stud cracking. We offer these products at great prices.

The advantages of Gem Pull Studs are :

• Uses replaceable hardened steel inserts
• Safety & easily installs/removes pull stud retention knobs
• Fast - self aligning, non-slip design minimizes damage to pull studs
• Increases tooling flexibility and reduces tooling inventory
• Saves time and aggravation

The benefits of Gem Pull Studs are :

• Our pull studs are manufactured with the best steel that ensures minimum wear and guarantees a tough inner core that resists the normal wear and tear caused by a CNC machine
• Most often, a retention knob is added at the tail of the taper, where it can be clamped by levers from the outside and drawn axially into the spindle nose
• Great for run out accuracy, balance repeatability and machine tool draw bar consistency
• Higher-quality retention knobs will resist wear and deformation better, and they will also locate more accurately on the toolholder's center line
• Another common option is a threaded bolt built in as part of the spindle that can be activated to screw or unscrew the toolholder

A collet is used to hold small diameter workpieces and small diameter milling cutters. Collets normally accept material that is .001 inches over the collet size and .004 inches under the collet size. We manufacture collets of standard sizes listed below and the sizes according to the customers requirements.

Gem manufactures Clamping nuts and Spanners of various sizes and shapes which are listed below. We can supply customised clamping nuts and spanners according to the customers' requirements

The advantages of Gem Clamping nuts and spanners are

• Imbalance compensation for high-speed applications
• Up to 80% higher clamping force
• New Collet Locking System
• Protection against corrosion
• Interchangeable with all other nuts per DIN STD 6499

The benefits of Gem Clamping nuts and spanners are

• Material: Reduced wear and increased life of the spanner
• Q+ Balancing: Ideal for high-speed applications
• Higher Clamping Force: Lower frictional forces resulting in up to 80% higher gripping force over standard non-treated clamping nuts
• Matched Tooling System for Best Fit: Whole system stands for highest precision and longest tool life
• Ergonomy: Prevents damaging of collets on tool changes

Gem manufactures Collets and Feed Fingers for Single Spindle Automatics accommodates part diameters up to 32mm and can completely machine complex parts in a single setup for fast production and high accuracy. This easy-access machine has 10 axes with a counter spindle and an interchangeable

We can manufacture and supply collets and feed fingers for the following single spindle automatics to various sizes mentioned below. We can manufacture different shapes like round, hexagon, square, octagan and so on., with minimum concentricity and even eccentric bore collets also

The advantages of Gem Single spindle Automatics are:

• Higher spindle speeds for carbide tooling
• Higher surface finishes
• Improved tool life
• Better machining tolerances
• Covers larger bar diameter variations
• Improves spindle bearing life
• Reduces noise and vibrations
• Substantially quieter running of profile bars

The benefits of Gem Single spindle Automatics are:

• A straightening attachment and adjustable guide bushing are also included
• It has thread whirling and other multi-axis functions necessary to produce complex medical components

We are well experienced in manufacturing collets and feed fingers for multi spindle automatics. Our collets and feed fingers for multi spindle automatics to suit any make, model and size. Kindly provide your sample and/or drawings.

The advantages of using Gem collets and feed fingers for Multi Spindle Automatics are:

• Higher clamping force
• Wear resistant
• Large chucking diameter range

The benefits of Gem collets and feed fingers for Multi Spindle Automatics are:

• You can save the time on Quickly Changing over the spindles.
• Higher Return on Investment
• Parts are not subjected to a stack-up of tolerances due to multiple chuckings