Our Products
The accumulation of microbiological slimes, biofilm and general bio-fouling in cooling water systems reduces system efficiency, increases operating and maintenance costs. If ignored leads to under deposit and pitting type of corrosion. Our synthetic organic Biodispersant is effective in removing dead algal and slime mass from cooling system. It has a capacity to penetrate inside the thick algae mats on the cooling tower deck or fills and help the biocide to penetrate the biomass. It also has a deterrent effect and it cleans the system on line. Generally it is dosed prior to biocide or along with biocide to enhance its efficacy:
Features:
To achieve maximum sugar extraction from crushed cane, sugar losses are to be maintained at a minimum in sugar mills. One of the major losses faced by a sugar factory is the sugar lost in bagasse during processing. Our unique ingredient and the synergistic functions of the formulation help in extraction of additional sucrose from bagasse on line. Its chemical composite helps to leach maximum sugar from bagasse by reduction of pol percentage in bagasse, reduction in moisture of bagasse and prevent non sugar coming out of bagasse. This additional sugar recovered from waste bagasse adds to the savings for the sugar mills & increases output efficiency.
Evaporator systems in sugar industries tend to accumulate salts. The first two Evaporator bodies have generally a deposition of carbonate and phosphate, while the third and fourth have sulphates and silicates. These deposits are results of the sulphitation and lime processes done in clarification of the juice. Our formulation is a blend of low molecular weight polymers which helps in protecting the quadruple evaporators from scaling & deposits in multiple ways. It is very effective for Carbonate, phosphate, sulphate, silicate deposits and it maintains a consistency in the Brixs of sugar juice in respective evaporator bodies.It thus helps retarding the scale formation in the evaporator and improves heat transfer by increasing the solubility of dissolved salts reducing evaporator cleaning frequency.
Mill Sanitation Chemicals are broad spectrum biocides that are effective in controlling the growth of algae, bacteria and fungi. They penetrate cell wall, lysis occurs, and metabolites leak out causing death of cell, thereby stunting their growth. Our formulation is a synergistic blend of Biocides which sanitises the mill section & restricts the inversion of sugar in the sugar juice. It has a highly effective micro biocide formulation forming electrostatic bonds with carboxyl group in protein and enzymes that interfere with oxidation reduction and other biochemical reactions. Also the chelating agent combines with the metal ions in the enzymes essential in the metabolism of microorganisms & restrict their growth
C massecuite consists mainly of highly viscous non sugar material and a low sugar. The non sugar in C massecuite increases the viscosity and hampers the pan boiling. Sometime because of high viscosity uniform boiling is not possible and thus may in turn char the sugar. To avoid this phenomenon the use of viscosity reducer is solicited in the process. Our formulation is a synergistic blend of special chemicals that reduces the viscosity of C massecuite at the time of pan boiling.
Our multipurpose boiler water treatment chemicals have been designed to offer multi-component boiler protection in a single chemical product. It is a special product designed to prevent scale and corrosion on the waterside surfaces of medium-and-low pressure boilers using unsoftened feed water. It is a combination of modern water treatment chemicals comprising of chemical softening agents, sludge conditioners and oxygen scavenger which protect the feed lines and the boiler form scale and corrosion. This brings convenience of using a single chemical treatment product, with multifunctional protection capabilities to deliver all-round boiler protection.
The control of microbiological activity is an important, often safety critical activity in many commercial, manufacturing and industrial process applications. Our biocides are effective in controlling bacterial slime and fungal growth in industrial recirculating cooling water systems, air washer systems and evaporate condensers. We have a range of both oxidizing and nonoxidizing biocides, which have a broad spectrum efficacy and are effective over a wide range of pH.Features:
Our multipurpose organic corrosion and scale inhibitor is designed for use in industrial cooling systems. It is composed of ingredients that are biodegradable and contains no zinc or heavy metal components. It functions by forming a microscopic inhibitive film on the metal surface that acts as a barrier to prevent or minimize corrosion. It also contains effective polymeric antifoulants and sequestrants to help remove metallic oxide, silt and dead microbiological material to maintain a cleaner and more efficiently operating system.
The detrimental impact of metallic corrosion can be a significant issue that affects the operation and maintenance of open and closed cooling water systems. To ensure that such closed cooling systems are well maintained and operate at optimum efficiency it is essential that the correct water conditions are maintained at all times. This can be achieved using carefully selected corrosion inhibitors designed specifically for cooling systems. Our advanced technology cooling water corrosion inhibitors have been scientifically formulated to protect cooling systems from the effects of metallic corrosion. Our high performance corrosion inhibitors deliver improved system performance, helping to reduce maintenance costs, improve reliability and optimise operational efficiency.
Our cleaning system has been specially developed to effectively remove deposit, sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron, Calcium and Magnesium based deposits from cooling water systems where it is not practical to remove the tower packing. It is found to be most effective in cleaning, where deposition or oil contamination is suspected of reducing heat transfer or restricting flow available. Deposits are softened and solubilized as our cleaner penetrates the deposits and enhances the action of cooling water dispersants to slough off remaining deposits which are later removed during a blow down or draining.
The accumulation of microbiological slimes, biofilm and general bio-fouling in cooling water systems reduces system efficiency, increases operating and maintenance costs, and raises risks to safety and health. Our polymeric dispersent is a synthetic organic anti-foulant which inhibits the deposition of fouling materials on the heat transfer surfaces. It eliminates fouling caused by dead microbiological growth, phosphates, silicates, metallic oxides silt and other air-borne materials. Thus it keeps surfaces clean, maintains a high rate of heat transfer and aids the formation of corrosion inhibitor film.
The unwanted accumulation of scale and detrimental impact of metallic corrosion can be significant issues that affect the operation and maintenance of open and closed cooling water systems. To ensure that such open and closed cooling systems are well maintained and operate at optimum efficiency, it is essential that the correct water conditions are maintained at all times. This can be achieved using carefully selected scale and corrosion inhibitors designed specifically for such cooling systems.Our technologically advanced cooling water scale and corrosion inhibitors have been scientifically formulated to protect cooling systems from the effects of both scale build-up and metallic corrosion in a single product. Our scale and corrosion inhibitors deliver improved performance, helping to reduce maintenance costs, improve reliability and optimise operational efficiency.
AHU if not cleaned regularly & properly lose their cooling efficiency & consume more electricity which drastically reduces its efficiency. To prevent this problem it is important to clean the AHU regularly. An effective cleaner would keep the AHU free of muck and dust running efficiently, thereby keeping the electricity consumption low. Our inhibited alkaline cleaner is useful in cleaning of Air Handling Units (AHU), Aluminum piston and Radiators. Also it has exceptionally long tank life and does not produce any objectionable odour, so it can be used for heavy duty cleaning at a economical price.
We provide a complete range of defoamers for different industries such as Adhesive, Agriculture, and Bitumen. Construction, Dyes & Pigments, Emulsion polymerization, Oilfield & petroleum, Paper & Pulp Sugar, Soaps & Detergents, Waste water Treatment. Our Silicon based defoamer is found to be powerful and highly effective due to its unique properties & can be used in practically all industrial applications where unwanted foam creates problems in manufacturing.
Corrosion within the pipe work used to transport potable water can lead to several problems like discolouration of water/fittings, increase the level of iron & copper in water & cause leakages in pipe. Our formulation is designed for control of calcium and magnesium deposits, sequestration of dissolved iron & magnesium and control corrosion. It helps in control of Iron and manganese in the well water system.
Ion exchange resins can become polluted or contaminated with suspended solids, slime, bacteria, and numerous organic or microbiological matters over a time period. Fouling of the resin by iron and organic build up cannot be removed by normal regeneration procedures and can cause gradual performance losses. Our resin cleaner is especially designed to remove bound iron from iron fouled resins and prevent accumulation of fouling conditions to extend the resin life significantly. It will ensure optimum exchange capacity & also keep the softener components clean when used on a regular basis.
Condensate systems have problems caused by iron and copper corrosion, neutralizing amines are used to neutralize the acid (H+) generated in the condensate. They control corrosion in the condensate system by maintaining a protective coating of iron oxide over the metal surfaces, while supplying sufficient material of an alkaline nature, to neutralize the carbonic acid that is formed in the condensate system. Our formulation is a blend of volatile product for steam condensate treatment that provides the direct neutralization of carbon dioxide and ensures positive corrosion protection. It is formulated to provide an ideal vapour-liquid distribution ratio, to protect all parts of the steam/condensate system with the minimal product loss.
Metallic corrosion due to oxygen is a major concern in the operation and maintenance of industrial boiler systems and steam plants. Oxygen derived from boiler water will corrode metallic components leading to increased maintenance costs and reduced boiler efficiency. To ensure that such boiler systems are well maintained and operate at optimum efficiency, our specially formulated oxygen scavenger helps in rapid and complete removal of dissolved oxygen form feed water and boiler water. It is an instant oxygen scavenger & normal reaction time with oxygen is only 15 to 20 second at ambient temperatures.
Boiler feed water plays a very important role for the friction less operation of a boiler as breakdowns and downtime can be avoided or reduced by regular feed water treatment. Our softening agents treat incoming boiler water hardness by sequestering both calcium and magnesium from the feed water preventing its premature deposition & scale formation. We recommend its use with sludge conditioners and dispersants, anti foam and oxygen scavengers to provide more effective treatment.
Boiler water sludge is caused by salts and traces of suspended matter present in operational steam boilers and feed waters. Our boiler sludge conditioner is designed to combat the accumulation and build-up of boiler sludge as it represents a modern concept in the chemical treatment of boiler sludge. It is a synthetic polymer designed to produce light, finely divided particles which are non-adherent and are easily removed with blow down. It can withstand high temperature and pressure conditions (up to 100 kg/cm2) and does not impart taste or odour to steam. These characteristics make it superior to many older natural organic treatments and it is recommended even where steam is likely to come in contact with edible products. It also has the additional feature of minimizing iron oxide deposition by reducing ferric oxides to the more desirable black oxide magnetite, thus it is effective in removing oil traces in the boiler.
Water contaminated with bacteria is a major cause of water-borne disease in humans. Enteric diseases like diarrhoea, dysentery, typhoid, paratyphoid, gastroenteritis, cholera, etc. are caused by the tiny menaces viz bacteria. Detecting these dangerous but unseen predators is quite a tough task and normally it is the domain of the white coated microbiologist who works amidst sterile conditions and a lot of hush hush secrecy.
No longer! Modern science has now made testing so easy and convenient. Just do it yourself
Our unique water potability test kit helps you detect coli form group of bacteria with ease and convenience.
These coliform bacteria are found in sewage as they are present in the intestine of man and animal and are generally accompanied by the harmful disease causing bacteria. ChekNsee helps to check water from all kinds of sources viz. taps, purifiers, coolers, storage tanks, rivers, ponds, springs etc. This extremely simple and convenient test can be carried out by anybody, anywhere i.e. homes, offices, factories, shops, banks, hospitals, hotels, schools, etc.
Measurement of Conductivity / TDS in laboratory is regularly performed in major industries, thus we provide an economical, accurate and reliable Laboratory electrode. These electrodes are specially designed with high performance plastic body for precise measurement of Conductivity / TDS and they are compatible with all the major Conductivity / TDS meters and Indicators. These electrodes can also be installed on measured surface or devices using a unique designed NPT connector available with us.
Features
Model | AME-CN-LE | AME-CN-LET | AME-CN-LEP |
Cell Constant ‘K’ | K = 1 | K = 1 | K = 1 |
Built -in Temp. Sensor | No | 30K Thermistor | PT 100 |
Operating Temperature | 0 to 90 Deg C | 0 to 90 Deg C | 0 to 90 Deg C |
Body Material | Plastic | Plastic | Plastic |
Process Connection | Laboratory | Laboratory | Laboratory |
Meter Connection | BNC | BNC & 3.5mm Jack | BNC & 3.5mm Jack |
Dimensions (D x H) mm | 12 x 120 | 12 x 120 | 12 x 120 |
Cable Length | 1M | 1M | 1M |
Measurement accuracy for pH depends on quality and specification of the instruments you use. We have variety of Industrial Electrodes that are used in Process Industries for monitoring and control of pH. These electrodes have compact design with single chamber weatherproof Case for insertion or flow through installation.
Features
Generally, a swimming pool uses chlorine for disinfection, but it has lots of disadvantages as it chemically changes and becomes chloramine. Thisis the reason that chlorine pools often have a distinctive smell, cause skin/eye irritation, create a unpleasant odour. Our new Nano Silver based disinfectant has ability to kill the entire bacteria in swimming pools water and to create a self-antiseptic mechanism in the pool despite introductionofnewbacteria.AregulardosageofourformulationnotonlyhelpstodisinfectthepoolbutalsosavewaterandReducethefrequency of water change. It is absolutely safe for human health, environment friendly and does not create any unpleasant odour.
Our Industrial Reverse Osmosis Systems are engineered to economically produce high purity water by removal of dissolved minerals, particles, and other impurities. Each system is constructed using the highest quality components and materials for reliable operation and exceptional performance.We ensure the compliance of our products with the defined industry standards and quality guidelines. Our standard machines are available with product water outputs from 200 LPH to 2000 LPH. We also offers a wide variety of customised system for pre/post treatment, distribution pumps, and integrated controls for a complete water treatment system.Our specialty is skid mounted, pre-piped, and pre-wired equipment allowing for quick installation and start-up time. We are always ready to work with you to design a customized system meeting your water treatment requirements at leading market price.
Features:Compact, Sturdy & Ergonomically DesignMulti-Functional Control PanelConvenient Auto Flushing SystemControlled Reject Recovery System.Inlet & Outlet CIP (Clean-In-Place) Arrangements.Including Tank Float Valve for Auto cut-off.