Brushless DC Motor in Rajkot

ISI Mark heavy Motor body We are using High Quality NRB Brand Bearing for long life of bearing and smooth runing. Our motor body casting is High Presser molding system, it gives beautiful look and generate low heat. Stamping is 100% silicon with progressive cutting die for low AMP consumption. Aluminium rotor more...

ISI Mark heavy Motor body We are using High Quality NRB Brand Bearing for long life of bearing and smooth runing. Our motor body casting is High Presser molding system, it gives beautiful look and generate low heat. Stamping is 100% silicon with progressive cutting die for low AMP consumption. Aluminium rotor more...

ISI Mark heavy body 1HP aerator Motor We are using High Quality NRB Brand Bearing for long life of bearing and smooth runing. Our motor body casting is High Presser molding system, it gives beautiful look and generate low heat. Stamping is 100% silicon with progressive cutting die for low AMP consumption. Alu more...

• MOQ : 500 Piece
• Parameters : Class-a Insulation, Impedance Protected
• Operating Temperature : -30 degree C to +60 degree C
• Insulation Resistance : > 10 MΩ
• Supply Type : Manufacturer
• Phase : Single Phase

Features Soft Start Auto Restart Auto Power down Constant speed Adjustable speed control Intelligent, speed control   Application Refrigerator Evaporator, Condenser Exhaust Fan, Blower & General Purpose 1-15 Watts more...

• Motor Trip Voltage : <160 , >270 V
• Delays : Remote Sensing Start Delay and Full Speed are Achieved in Factory Set Delays
• Humidity : ≤ 95%RH@50 degree C
• Operating Voltage : 150V ≤ Vin ≤ 265V
• Over Load Trip Current : Factory Set
• RPM vs Voltage : Constant RPM
• Time Delay to Start : ≤ 5 Sec.
• Supply Type : Manufacturer

The BLDC (Brushless Direct Current) aircon motor is a cutting-edge component that plays a pivotal role in enhancing the efficiency of air conditioning systems. Renowned for its superior performance, this motor has revolutionized the industry with its innovative features. Designed specifically for air conditio more...

• Finishing : Polished
• Operating Type : Automatic
• Supply Type : Manufacturer
• Specialities : High Performance, Easy To Operate
• Driven Type : Electric
• Application : Industrial

The BLDC E vehicle motor produced by Micro Instruments are of the highest quality and are intended to work effectively and consistently. Electric bikes, scooters, and even cars can all benefit from these motors' many different applications. A reliable BLDC E Vehicle Motor manufacturer, Micro Instruments, has more...

• MOQ : 100 Piece
• Supply Type : Manufacturer
• Specialities : Rust Proof, Long Life, High Performance
• Condition : New
• Finishing : Polished
• Type : Outrunner Motor
• KV : 1800KV
• Country of Origin : India
• Application : Quadcopter, RC Car, Helicopter, Aeroplane etc

more...

• Color : Black
• Condition : New
• Driven : Eelectric
• Supply Type : Manufacturer
• Application : Motor Use
• Type : Stepper Motor Driver Ic
• Brand Name : Invento

more...

• Packaging Type : Box
• Max Efficiency : 80%
• Condition : New
• Country of Origin : India
• Type : Outrunner Motor
• Supply Type : Manufacturer
• Specialities : Rust Proof, Long Life, High Performance
• Finishing : Polished
• Color : Silver

more...

• Rotor Inertia : 480 gcm2
• Shaft Diameter : 6.35 mm
• Phase : Single Phase
• Length : 76 mm
• Shaft Length : 22 mm
• Configuration : 4 wire stepper motor
• Voltage : 2.8 Amp
• Detent torque : 0.68 kgcm
• Holding Torque : 9kgcm bipolar
• Weight : 1030 g

more...

• Peak Current per Channel : 2A
• Power Consumption : 36 mA (logic)
• Continuous Current per Channel : 1A
• Power Supply Voltage : 5 V or 7-35 V
• Weight : 33 g
• Motor Voltage : 5-35
• Power Connector : Pins (5 V) or Screw Terminals (7-35 V)
• Motor Driver : L298N
• Size : 49 x 55 x 33 mm
• Motor Connectors : Screw Terminals

more...

• MOQ : 1000 Piece
• Type : Self Excited
• Voltage : <100 V
• Current : 101-200 mA
• Insulation : Class A
• Supply Type : Manufacturer
• Power : 50-150 W
• No. of Phase : 2
• Color : Grey
• Speed : 2000-6000 RPM

more...

• Resistance : 0.83 Ohms
• Color : Green
• Input Phase : Single Phase
• Supply Type : Manufacturer
• Material : Mild Steel
• Output Current : 2.8A

more...

• Supply Type : Manufacturer
• Voltage : 3.2V

Ideal Servo Motor for CNC machines, diamond machines, laser machines. Standard NEMA23 frame size with 22.4Kgcm holding torque. Works best with RMCS-1110 a 2-phase Low Voltage AC Servo Drive. Rated for 200W AC servo applications up to 2000RPM. Configuration: 4 wire bipolar stepper motor, 2-phase AC, Shipping W more...

• Torque : 110kgcm
• Supply Type : Manufacturer
• Frame Size : NEMA42
• Wire Configuration : 4-wire
• Drive Compatibility : RMCS-1101 Stepper Drive
• Type : Stepper Motor
• Current Rating : 5A
• Application : Ideal For CNC Machines And Other Machinery
• Configuration : Bipolar
• Resistance Per Phase : 0.7ohm

Ideal Motor for CNC machines and other machinery. Standard NEMA42 frame size. 110Kgcm bipolar configuration motor. Works well with RMCS-1101 Stepper Drive at 5Amp configuration. Configuration: 4 wire bipolar stepper motor, Holding Torque: 110kgcm bipolar mode, Phase current : 5.5Amp, Resistancephase: 0.7ohm. more...