Automatic CNC Machine in Rajkot

• Power Source : ELECTRICAL
• Voltage : 440V
• Application : Metalworking
• Power : 55KW
• Driven Type : Mechanical
• Automatic Grade : Fully Automatic
• Color : Grey
• Brand Name : TCP
• Certification : ISO 9001:2008
• Condition : New

more...

• Voltage : 415V
• Material : Mild Steel
• Condition : New
• Place of Origin : India
• Brand Name : TCP
• Supply Type : Manufacturer
• Driven Type : Electric
• Usage : Industrial
• Certification : CE Certified
• Type : PCD

more...

• Material : Stainless Steel
• Spindle Motor : 5HP
• Brand Name : TCP
• Supply Type : Manufacturer
• Driven Type : Mechanical
• Operating Type : Automatic

We offer  TCP-H-600L-1500MM  CNC Lathe Machine    to our clients. Capacity: Maximum Turning Diameter: 1000 mm Standard Turning Diameter: 800 mm Turning Length: 300 mm Width of Bed: 750 mm Height of Center: 600 mm   Spindle: Spindle Nose: A2-8 Max. Bar Capacity (In Hollow Chuck): 70 mm more...

• MOQ : 1 Piece
• Controller : Weihong controller
• Automation Grade : Automatic
• Brand Name : UCM
• Voltage : 220V
• Power : Single Phase
• Supply Type : Manufacturer

more...

• Supply Type : Manufacturer
• Voltage : 220V
• Shredding Capacity : 500-1000 kg/hr
• Power : Single phase
• Country of Origin : Made in India
• Automatic Grade : Automatic
• Driven : Electric

more...

• Automatic Grade : Automatic
• Operation Mode : Automatic
• Voltage : 440V
• Rated Power : 3 Phase
• Supply Type : Manufacturer

Two independent working spindles can finish two work-piece at the same time, also cna use two different tools to finish two different designs one by one automaticaly. Special Vacuum system with: vacuum table with movable suction block, vacuum pump and tubes. Heavy bistratal side plates, which can keep large s more...

• Automatic Grade : Fully Automatic
• Spindle Motor Maximum Speed : 18000 rpm
• Axis Travel : 2500 mm x 1500 mm x 250 mm (X axis x Y axis x Z axis)
• Power Source Required : Single phase/three phase depending on spindle
• Spindle Motor Power : 2.2, 3.2, 4.5, ,6 kW
• Supply Type : Manufacturer
• Axis Drivers : Stepper motor with microstep drive
• Floor Space Required : 12feet X 7feet
• Axis Motion Transmission : X axis- Ball screw, Y Axis- Ball screw, Z Axis- Ball screw
• Maximum Weight of Material on Table : 500 kg

more...

• Material : Mild Steel
• Axis Travel : X=1800mm,Y=3500mm,Z=800mm
• Controller : DSP / SYNTEK
• Supply Type : Manufacturer
• Spindle Power : 7kW Air Cooled
• Automation Grade : Automatic
• Axis Motor : Servo Motor

more...

• Weight : 100-1000kg
• Voltage : 110V
• Automatic Grade : Semi Automatic
• Driven Type : Elecric
• Certification : CE Certified
• Rated Power : 1-3kw
• Type : Cnc Wood Carving Machine

Superb efficiency and cost effective nature are counted amidst the attributes of our cutting-edge CNC Woodworking Machine . The CNC Woodworking Machine, we offer, is designed in strict compliance with the industrial quality standards and by making use of the best materials and components. We are a well-known more...

• Driven Type : Electric
• Warranty : 1year
• Color : Black
• Rated Power : 1-3kw
• Type : Cnc Glass Cutting Machine
• Certification : CE Certified
• Voltage : 110V
• Automatic Grade : Semi Automatic
• Weight : 100-1000kg

Avail from us feature packed CNC Multi Head Glass Cutting Machine from us. We are engaged in offering CNC Multi Head Glass Cutting Machine that is fabricated with excellence, using top grade raw materials. CNC Multi Head Glass Cutting Machine, that we provide, is appreciated for its excellent performance. Att more...

• Driven Type : Hydraulic
• Cutting Load : 120-150 ton, >150 ton
• Brand Name : GMT
• Automatic Grade : Semi Automatic
• Usage : Industrial
• Table Length : 1500-4000mm
• Control Type : CNC, Non-CNC

more...

• Body Material : Stainless Steel
• Voltage : 380V
• Cutting Material : Iron, Steel
• Driven Type : Hydraulic
• Condition : New
• Automatic Grade : Automatic

more...

• MOQ : 1 Units
• Model Name/Number : CRHPB-110-31/25
• Feature : Easy To Operate And Use Of CNC System With Large Bending Option And Tooling Library , Best For Complex Bending And Volume Of Production , CNC Press Brake Painted With High Chromed For Longer Life.
• Finish : Paint Coated
• Material : MS
• Brand Name : Rajshakti
• Automatic Grade : Automatic

more...

• Brand Name : RAJSHAKTI
• Material : Mild Steel
• Automatic Grade : Automatic
• Country of Origin : Made in India
• Power Source : Hydraulic

more...

• MOQ : 1 piece
• Drill Depth : up to 50 mm
• Supply Type : Manufacturer
• Number Of Shaft : 20
• Voltage : 430 Volt
• Material : Mild Steel
• Brand Name : Yantra Design
• Machine Type : Automatic
• Country of Origin : India
• Weight : 7000 Kg

Yantra Design is one of the Leading manufacturer in Manufacturing CNC Drilling Machine. Yantra Design have served High Quality CNC Drilling Machine in all over the globe including high demanded locations like Ghaziabad, Pune, Bengaluru, Raipur, Delhi, Hyderabad, Indore, mumbai and Kolkata.  Product Descripti more...

• Finishing : Polished
• Color : Orange
• Voltage : 430 Volt
• Material : Mild Steel
• Specialities : Rust Proof, Long Life, High Performance, Easy To Operate
• Condition : New
• Drilling Capacity : Up To 50 Mm
• Phase : 3
• Supply Type : Manufacturer
• Pressure : High Pressure

yantra design is one of the leading manufacturer in manufacturing cnc plate drilling machine. yantra design have served high quality cnc plate sheet drilling machine in all over the globe including high demanded locations like raipur, ghaziabad, pune, bengaluru, delhi, hyderabad, indore, mumbai and kolkata.  more...

• Finishing : Polished
• Supply Type : Manufacturer
• Material : Mild Steel
• Condition : New
• Model Number : YD-2030
• Specialities : Long Life, High Performance, Easy To Operate
• Machine Weight : 8000 Kg
• Pressure : High Pressure
• Operating Mode : Automatic
• Color : Yellow

We have emerged as the foremost manufacturer of CNC Drilling Machine in Chennai. Extensively used in different industries, this CNC Drilling Machine is manufactured using quality tested components and ultra-modern technology. Our quality examiners test this CNC Drilling Machine against different parameters so more...

• MOQ : 1 Piece
• Country of Origin : India
• Supply Type : Manufacturer
• Automation Grade : Automatic
• Application : Cnc Cutting Machine
• Pipe Material : Steel
• Drive System : Stepper
• Phase : Single Phase
• Type : CNC Pipe Profile Cutting Machine

CNC Pipe profile cutting system 3 / 5 / 6 axis for cutting profile on pipes with plasma cutting torch. Pipe diameter can be as per customer requirement. Chuck type and Disc type system can be provided for pipe holding as per customer requirement. Machine will comprise of – 1. CNC Gantry system 2. Nestin more...

• Phase : Single Phase
• Working Width : 1000 - 1500mm Max
• Country of Origin : India
• Types of Heads : Plasma / Oxyfuel
• Required Power Supply : 230V
• Supply Type : Manufacturer
• Speed of Cutting : Upto 3 Mtrs/min
• Material : Mild Steel
• No. of Torches : 1
• Working length : 3000 mm max

more...

• Usage/Application : Cnc Cutting Machine
• Country of Origin : India
• Supply Type : Manufacturer
• Condition : New
• Voltage : 220V
• Phase : Single Phase
• Pipe Material : Steel
• Rapid Speed : 10000 mm/mim

CNC Plate and Pipe Profile integrated cutting system with Plasma cutting / Oxyfuel torch or both as per customer requirement. Suitable for plate cutting upto length as per customer requirement, width 2000 mm onwards, pipe cutting – diameter 40 mm – 600 mm and upwards if required and length as per more...

• MOQ : 1 piece
• Phase : Three Phase
• Frequency : 50 Hz
• Working Area : 1300*900 mm
• Supply Type : Manufacturer
• Automatic Grade : Automatic
• Usage/Application : Laser Sheet Cutting
• Brand Name : Whale

more...

• Phase : Three Phase
• Automatic Grade : Automatic
• Brand Name : Whale
• Supply Type : Manufacturer
• Frequency : 50 Hz
• Working Area : 1300*900 mm
• Type of Machine : Laser Metal Cutting Machine

more...

• Brand Name : Whale
• Capacity : 5 Ton/day
• Layout : Horizontal
• Automation Grade : Automatic
• Supply Type : Manufacturer
• Voltage : 240 V
• Frequency : 60 Hz

more...

• MOQ : 1 Piece
• Automatic Grade : Automatic
• Country of Origin : India
• Control System : Dsp Controller
• Job Material : Wood
• Z Axis Working Area : 150 mm
• Driven Type : Electric
• XY Axis Working Area : 600 x 600 mm
• Supply Type : Manufacturer
• X-Y Axis Working Area : 1200 x 1200 mm

more...

• Working Area (feet x feet) : 4 x 4
• Z Movement : Ball Screw Transmission
• Driven Type : Electric
• Application : Wood Cutting
• Machine Type : 3 Axis
• Spindle : Double Head Spindle
• Spindle Power : 2.2 kW
• Supply Type : Manufacturer
• Country of Origin : India
• Automatic Grade : Automatic

A double head servo machine is an advanced CNC (Computer Numerical Control) machine designed for enhanced efficiency and versatility, often used in applications like engraving, cutting, and milling. Here’s a detailed overview: Key Features Dual Heads : Equipped with two cutting or engraving heads, allow more...

• Driven Type : Electric
• Spindle Power : 3 kW
• XY Axis Working Area : 300 x 300 mm
• Supply Type : Manufacturer
• Automatic Grade : Automatic
• Country of Origin : India
• Working Area (feet x feet) : 1.5 x 1.5
• Type : Multi Spindle
• Voltage : 220V

CNC router machine is a versatile tool used for cutting, carving, engraving, and milling various materials with high precision. Here’s a detailed overview of its features, benefits, and applications: Computer Numerical Control (CNC) : Automated control via computer programming allows for intricate desig more...

• MOQ : 1 piece
• Power : 200V - 50 Hz
• Type : Cnc Ceiling Fan Winding Machine
• Condition : New
• Color : Red
• Brand Name : Kisan Engineering
• Driven Type : Electric
• Shape : Rectangular
• Capacity : 250 Stators/Day
• Certification : ISO 9001:2008 Certified

Kisan Engineering KIJ-200  is an advanced  electric-powered CNC model  designed for high production. It enables winding of  900-1000 ceiling fans per day . This  dual-head machine winds two fans simultaneously , effectively doubling production. The  stator rotates automatically , more...

• Driven Type : Electric
• Spindle Speed : 100 Rpm To 5000 Rpm
• Certification : ISO 9001:2008 Certified
• Machine Weight : 100-1000kg
• Condition : New
• Packaging Type : Wooden Box
• Brand Name : Kisan Engineering
• Phase : Single Phase
• Finishing : Polished, Chrome Finish, Powder Coated
• Specialities : Long Life, High Performance, Easy To Operate

The Kisan Engineering KIJ-150 is a modern electric-operated CNC coil winding machine designed for high production efficiency. This model is capable of winding 500-600 fan stators per day , making it ideal for large-scale manufacturing. The machine features an automatic rotating stator and automatic slot-chang more...