Our Products
Ores And Minerals
1 Products availableSteel Products
1 Products availableIron Products
1 Products availableIron & Metal Alloys
1 Products availableIron Ore
1 Products availableCoal & Charcoal
1 Products availableTmt Bar
1 Products availableLeading Manufacturer, Supplier & Retailer of Sponge Iron Pellets.
Specifications
Item & unit | Prime grade |
---|---|
Size | 25- 80 mm |
Below 25 mm | 5 % Max |
Above 80 mm | 5 % Max |
FC % | 85 % Min |
Ash % | 12.5% (+/- 0.5%) Max |
Sulfur % | 0.6 Max |
Phosphorus % | 0.04 Max |
Volatile Matter % | 1.5 Max |
Total Moisture % | 5.0 Max |
M40 % | 82 Min |
M10 % | 8.0 Max |
CSR % | 62 Min |
CRI % | 28 Max |
Specifications
Fe | 64 % (+/- 0.5%) |
---|---|
SiO2+Al2O3 | 6.5 % Max |
S | 0.03 % Max |
P | 0.055 % Max |
TI | 93 % Min |
AI | 4 % Max |
Porosity | 19-24 % |
CCS | 230 Min |
Size | 5- 18mm |
Below 5 mm | 5 % max |
Above 18 mm | 5 % max |
Mean Size | 10-12 mm |
Details
Process Rout | Electric Arc Furnace + LRF + CCM |
---|---|
Size | 100x100 / 130x130 / 160x160 / 200x200 / 230x230 / 250x250 / 160x230 |
Length | 5- 12 Meters as per order |
Continuous Cast Rounds for Seamless Pipe Application 160 mm
Grade | Range | %C | %Mn | %S | %P | %Si | %Al | %Ni | %Cr | %Mo | %V |
BS3059 Pt-II Gr243 | Min | 0.13 | 0.6 | - | - | 0.15 | - | - | - | 0.25 | - |
Max | 0.18 | 0.75 | 0.02 | 0.02 | 0.35 | 0.01 | - | 0.2 | 0.35 | 0.05 | |
BS3059 Pt-II Gr440 | Min | 0.13 | 1.05 | - | - | 0.15 | 0.02 | - | - | - | - |
Max | 0.17 | 1.2 | 0.02 | 0.02 | 0.3 | 0.05 | - | 0.2 | 0.05 | 0.08 | |
DIN 1629 ST52 | Min | 0.17 | 1.35 | - | - | 0.2 | 0.02 | - | 0.15 | - | - |
Max | 0.21 | 1.5 | 0.02 | 0.02 | 0.4 | 0.05 | - | 0.2 | 0.05 | 0.05 | |
DIN 1629 ST52 (Spl) | Min | 0.18 | 1.45 | - | - | 0.3 | 0.02 | - | 0.2 | 0.08 | - |
Max | 0.22 | 1.6 | 0.02 | 0.02 | 0.45 | 0.05 | - | 0.3 | 0.13 | 0.05 | |
SAE 1518 | Min | 0.17 | 1.25 | - | - | 0.1 | 0.02 | - | 0.1 | - | - |
Max | 0.21 | 1.4 | 0.02 | 0.02 | 0.35 | 0.05 | - | - | 0.05 | 0.05 | |
SAE 1040 | Min | 0.39 | 0.75 | - | - | 0.25 | 0.02 | - | - | - | - |
Max | 0.44 | 0.9 | 0.02 | 0.02 | 0.4 | 0.05 | - | 0.2 | 0.1 | 0.05 | |
SAE 1035 | Min | 0.33 | 0.65 | - | - | 0.2 | 0.02 | - | - | - | - |
Max | 0.37 | 0.85 | 0.02 | 0.02 | 0.35 | 0.05 | - | 0.2 | 0.1 | 0.05 | |
ASTM A105 | Min | 0.18 | 0.7 | - | - | - | - | - | - | - | - |
Max | 0.24 | 1 | 0.05 | 0.04 | 0.35 | - | - | 0.3 | 0.12 | 0.03 | |
SAE 4130 | Min | 0.28 | 0.45 | - | - | 0.2 | 0.02 | - | 0.85 | 0.15 | - |
Max | 0.33 | 0.6 | 0.02 | 0.02 | 0.3 | 0.05 | - | 1.05 | 0.25 | 0.05 | |
API 5L X-42 | Min | 0.11 | 1.05 | - | - | 0.3 | 0.02 | - | 0.13 | - | - |
Max | 0.15 | 1.2 | 0.02 | 0.02 | 0.45 | 0.05 | - | 0.17 | - | 0.05 | |
API 5L X-60 | Min | 0.17 | 1.35 | - | - | 0.35 | 0.02 | - | 0.25 | - | 0.12 |
Max | 0.21 | 1.45 | 0.02 | 0.02 | 0.45 | 0.05 | - | 0.35 | - | 0.15 | |
N-80 | Min | 0.4 | 1.6 | - | - | 0.3 | 0.02 | - | - | - | - |
Max | 0.45 | 1.7 | 0.02 | 0.02 | 0.45 | 0.05 | - | - | - | - | |
BS-3059 (IBR GRADE) (Equivalent to- BS-3059) | Min | 0.13 | 1.05 | - | - | 0.1 | 0.02 | - | - | - | - |
Max | 0.18 | 1.2 | 0.03 | 0.03 | 0.35 | 0.05 | 0.2 | 0.2 | 0.05 | 0.05 | |
SAE-1518 (Eq to SAE-1518) | Min | 0.18 | 1.2 | - | - | 0.1 | 0.02 | - | - | - | - |
Max | 0.21 | 1.3 | 0.01 | 0.02 | 0.35 | 0.05 | 0.2 | 0.2 | 0.05 | 0.05 | |
SAE-1541 (Eq. To SAE-1541) | Min | 0.4 | 1.5 | - | - | 0.1 | 0.02 | - | - | - | - |
Max | 0.44 | 1.65 | 0.02 | 0.03 | 0.25 | 0.05 | 0.2 | 0.2 | 0.05 | 0.05 | |
ST-52 (Eq-DIN 1.0580) | Min | 0.18 | 1.4 | - | - | 0.3 | 0.02 | - | - | - | - |
Max | 0.22 | 1.6 | 0.02 | 0.02 | 0.55 | 0.05 | 0.2 | 0.2 | 0.05 | 0.05 | |
SAE-1537V (EQ. To SAW-17) | Min | 0.25 | 1.5 | - | - | 0.15 | 0.02 | - | - | - | 0.12 |
Max | 0.3 | 1.6 | 0.02 | 0.02 | 0.3 | 0.04 | 0.2 | 0.2 | 0.05 | 0.15 | |
SAE-1527 (Eq. To SAW-15) | Min | 0.25 | 1.5 | - | - | 0.15 | 0.02 | - | - | . | - |
Max | 0.29 | 1.6 | 0.02 | 0.02 | 0.35 | 0.05 | 0.2 | 0.2 | 0.05 | 0.05 | |
P-110 (Eq. To SAW-16) | Min | 0.24 | 1.45 | - | - | 0.15 | - | - | 0.5 | - | - |
Max | 0.29 | 1.55 | 0.02 | 0.02 | 0.35 | 0.02 | 0.2 | 0.6 | 0.05 | 0.05 | |
SAE-4140 | Min | 0.38 | 0.75 | - | - | 0.1 | 0.02 | - | 0.8 | 0.15 | - |
Max | 0.43 | 1 | 0.02 | 0.03 | 0.25 | 0.05 | 0.2 | 1.1 | 0.25 | 0.05 | |
SAE-4130 | Min | 0.28 | 0.4 | - | - | 0.1 | 0.02 | - | 0.8 | 0.15 | - |
Max | 0.33 | 0.6 | 0.02 | 0.03 | 0.25 | 0.05 | 0.2 | 1.1 | 0.25 | 0.05 | |
SAE-1035 | Min | 0.32 | 0.6 | - | - | 0.1 | 0.02 | - | - | - | - |
Max | 0.38 | 0.9 | 0.02 | 0.03 | 0.25 | 0.05 | 0.2 | 0.2 | 0.05 | 0.05 | |
SAE-5120H | Min | 0.17 | 0.6 | - | - | 0.15 | 0.02 | - | 0.6 | - | - |
Max | 0.23 | 1 | 0.02 | 0.03 | 0.25 | 0.05 | 0.2 | 1 | 0.05 | 0.05 |
Alloy Grade for Forging Applications (Blooms & Billets)
Grade | C | Mn | S | P | Si | Al | Cr | Ni | Mo |
16MnCr5 | 0.14/0.19 | 1.00/1.30 | 0.035 max | 0.035 max | 0.15/0.40 | 0.020/0.040 | 0.80/1.10 | - | - |
EN1A | 0.07/0.15 | 0.80/1.20 | 0.20/0.30 | 0.040 max | 0.10 max | - | - | - | - |
EN43BCR | 0.35/0.45 | 0.70/1.00 | 0.035 max | 0.035 max | 0.15/0.35 | 0.020 min | 0.45/0.55 | - | - |
EN43D | 0.60/0.65 | 0.40/0.60 | 0.025/0.040 | 0.045 max | 0.15/0.35 | 0.020 min | - | - | - |
SAE8620 | 0.18/0.23 | 0.70/0.90 | 0.020/0.050 | 0.035 max | 0.15/0.30 | 0.020/0.050 | 0.40/0.60 | 0.40/0.70 | 0.15/0.25 |
SCM420 | 0.18/0.23 | 0.60/0.85 | 0.015/0.030 | 0.030 max | 0.15/0.35 | 0.020/0.035 | 0.90/1.20 | - | 0.15/0.30 |
EN31 | 0.98/1.10 | 0.25/0.45 | 0.025 max | 0.025 max | 0.15/0.35 | - | 1.45/1.60 | - | - |
SAE4140 | 0.38/0.43 | 0.75/1.00 | 0.035 MAX | 0.035 MAX | 0.15/0.30 | 0.020/0.050 | 0.80/1.10 | - | 0.15/0.25 |
20MnCr5 | 0.17/0.22 | 1.10/1.40 | 0.035 MAX | 0.035 MAX | 0.15/0.40 | 0.020/0.050 | 1.00/1.30 | - | - |
A-105 | 0.18/0.25 | 0.70/1.05 | 0.040 max | 0.035 max | 0.10/0.35 | 0.020/0.040 | - | - | - |
EN9 | 0.50/0.60 | 0.50/0.80 | 0.030 max | 0.030 max | 0.20/0.30 | 0.015/0.025 | - | - | - |
EN8D | 0.40/0.45 | 0.70/0.90 | 0.030 max | 0.030 max | 0.20/0.30 | 0.015/0.025 | - | - | - |
SAE1552 | 0.47/0.55 | 1.20/1.50 | 0.025 max | 0.025 max | 0.15/0.35 | 0.015/0.025 | 0.25 MAX | - | - |
SAE4130 | 0.29/0.32 | 0.48/0.58 | 0.010/0.020 | 0.025 max | 0.20/0.30 | 0.020/0.040 | 0.95/1.05 | 0.25 max | 0.18/0.22 |
SAE1040 | 0.37/0.44 | 0.60/0.90 | 0.020/0.035 | 0.035 MAX | 0.10/0.35 | 0.020/0.040 | - | - | - |
EN15A | 0.33/0.40 | 1.30/1.70 | 0.010/0.035 | 0.040 MAX | 0.15/0.35 | 0.020/0.035 | - | - | - |
EN18 | 0.35/0.45 | 0.60/0.95 | 0.035 MAX | 0.035MAX | 0.15/0.35 | 0.020/0.035 | 0.85/1.15 | - | - |
CK 45 | 0.42/0.50 | 0.50/0.80 | 0.035 MAX | 0.035 MAX | 0.10/0.35 | 0.020/0.040 | - | - | - |
EN 353 | 0.14/0.20 | 0.50/1.00 | 0.020/0.035 | 0.035 MAX | 0.10/0.35 | 0.020/0.040 | 0.75/1.25 | 1.00/1.50 | 0.08/0.15 |
HT( V-0.03-0.05) | 0.17-0.21 | 1.25/1.45 | 0.020/0.035 | 0.035 MAX | 0.10/0.35 | 0.020/0.040 | 0.05 MAX | 0.05 MAX | 0.05 MAX |
Continuous Cast Rounds for Seamless Pipe Application 160 mm
IS 2830 - 1992 | Carbon % | Manganese% |
C-15 | 0.12-0.18 | 0.30-0.60 |
C-18 | 0.15-0.21 | 0.30-0.60 |
C-20 | 0.17-0.23 | 0.30-0.60 |
C-15MMn | 0.12-0.18 | 0.60-1.00 |
C-18MMn | 0.15-0.21 | 0.60-1.00 |
C-20MMn | 0.17-0.21 | 0.60-1.00 |
C-15HMn | 0.12-0.18 | 1.00-1.50 |
C-18HMn | 0.15-0.21 | 1.00-1.50 |
C-20HMn | 0.17-0.23 | 1.00-1.50 |
The Sponge Iron Lumps are available in different lump sizes and are sourced after a careful assessment of the manufacturer. Thus, the superior quality of the Sponge Iron Lumps stock is always assured. Sponge Iron Lumps that we offer have excellent physical and chemical properties which make them widely demanded across the nation. Clients can avail our sourcing services for Sponge Iron Lumps direct from the manufacturer at reasonable prices.
Specifications
Constituent | Percentage |
Chemical | |
Fe, Total | 90 (+/- 2%) |
Fe, Metallic | 80 % (+/- 1%) |
Metallization | 88% (+/- 1%) |
Sulphur | 0.04 max |
Phosphorus | 0.07 max |
Carbon | 0.10 Min |
Physical | |
Size Lump | +4 mm to -18 mm |
Size Fines | -4mm |
Bulk Density | 1.6-2.0 MT/m3 |
Specifications
Silico Manganese | |||
Manganese (Min %) | Silicon (Si %) | Carbon (C %) | Sulphur (S %) |
60 - 65 | 14 - 17 | 2.20 Max | 0.05 Max |
60 - 65 | 15 - 18 | 2.00 Max | 0.05 Max |
Ferro Manganese | |||
70 - 75 | 06/08/12 | 1.50 Max | 0.05 Max |
70 - 75 | 06/08/12 | 1.50 Max | 0.05 Max |
75 - 80 | 06/08/12 | 1.50 Max | 0.05 Max |
Ferro Chrome | |||
60 - 65 | 06/08/12 | 4.00 Max | 0.05 Max |
60 - 65 | 06/08/12 | 2.00 Max | 0.05 Max |
Ferro Silicon | |||
70 - 75 | 0.15 Max | 1.50 Max | 0.05 Max |
70 - 75 | 0.15 Max | 0.50 Max | 0.05 Max |
Specifications
Carbon | 3.75 to 4.20 |
---|---|
Sulphur | 0.05 to 0.065 |
Phosphorous | 0.08 to 0.12 |
Manganese | 0.50 Max |
Silicon | 0.8 to 1.4 [Basic Grade] |
Rajesh Trading Company is a prominent Sponge Iron Pellets Sourcing Agent, serving many companies across India. We offer high-quality Sponge Iron Pellets for various manufacturing purposes. The Sponge Iron Pellets have desirable chemical and physical properties that make them perfect for a variety of applications. Available at competitive prices, the Sponge Iron Pellets can be sourced direct from the manufacturer without any service charges.
Physical Analysis (Size Fraction)
+04MM | More than 95% |
---|---|
-04MM | Less than 5% |
Specifications
Constituent | Percentage |
Fe, Total | 90 (+/- 2%) |
Fe, Metallic | 80 % (+/- 1%) |
Metallization | 88% (+/- 1%) |
Sulphur | 0.04 max |
Phosphorus | 0.07 max |
Carbon | 0.10 Min |
Size Lump | +4 mm to -18 mm |
Size Fines | -4mm |
Bulk Density | 1.6-2.0 MT/m3 |
Comparative Chart with ISI Standard
ISI Standard | Our TMT Standard | ||||||
Size | Specified weight gm/m | Tolerance Limit gm/m | Permissible Wt. Variation gm/m | Indv. Sample % Variation | Weight Tolerance gm/m | Weight Variation gm/m | Indv. Sample % Variation |
8mm | 395 | 367 - 423 | 56 | 7 | 370 - 402 | 32 | 4 |
10mm | 617 | 574 - 660 | 86 | 7 | 578 - 616 | 38 | 3 |
12mm | 888 | 844 - 932 | 88 | 5 | 856 - 892 | 36 | 2 |
16mm | 1578 | 1500 - 1657 | 158 | 5 | 1528 - 1592 | 64 | 2 |
20mm | 2470 | 2396 - 2544 | 148 | 3 | 2435 - 2485 | 50 | 1 |
25mm | 3850 | 3735 - 3965 | 230 | 3 | 3798 - 3876 | 78 | 1 |
32mm | 6310 | 6121-6499 | 378 | 3 | 6247-6373 | 126 | 1 |