Our Products
Hydraulic Press
2 Products availableOur product range contains a wide range of Single Point Double Action Power Press, high speed press, Power Press HType, Cross Shaft Press and Power Press
Single point Suspension Non-Inclinable Double Action Power Press, having Steel Plate Fabricated Construction Duly Stress Relieved with 8 point Gibbing of Slide, Fitted with Pneumatically Operated Combined Single Disc. Friction Clutch and Brake.
With Standard Accessories: | |
|
Single point Suspension Non-Inclinable Single Action Press, having Fully Steel Fabricated Construction Duly Stress Relieved with 8 point Gibbing of Slide, Fitted with Pneumatically Operated Combined Single Disc. Friction Clutch and Brake.
Rajeshbrand mechanical Power Presses are coming inHframe versions from10 tons to 250 tonscapacity in most economical type of construction with several std./optional features such as manual/auto lubrication systems, knockouts electronics hand safety, Single/Double or Un-geared versions as also Pneumatic feeders/ straightness and de-coilers for automation Purpose. | ||||
Frame :The frame is of all steel construction, fabricated from Rolled steel plates with suitable cross ribbings. Presses
All Dimensions are in MM. |
Model No. | Tone | RHP-10T | RHP-20T | RHP-30T | RHP-50T | RHP-75T | RHP-100T | RHP-150T | RHP-200T | RHP-250T |
Tonnage | m.m. | 10 | 20 | 30 | 50 | 75 | 100 | 150 | 200 | 250 |
Stroke Adjustment | m.m. | 6-51 | 10-76 | 10-76 | 13-102 | 13-115 | 13-127 | 13-140 | 13-152 | 13-165 |
Adjustment of Ram | m.m. | 25 | 38 | 38 | 45 | 45 | 51 | 51 | 51 | 51 |
Crank Shaft Dia ( At Main Bearings) | m.m. | 63 | 76 | 83 | 95 | 115 | 127 | 152 | 160 | 165 |
Bed to Ram | m.m. | 215 | 255 | 290 | 355 | 375 | 420 | 445 | 470 | 485 |
Hole in Ram | m.m. | 25.4 | 32 | 38 | 38 | 45 | 51 | 51 | 63 | 63 |
Size of Bed (LR. X FB.) | m.m. | 355x460 | 457x508 | 508x559 | 559x610 | 610x813 | 660x762 | 711x914 | 762x965 | 812X1016 |
Opening in Bed | m.m. | 82 | 89 | 108 | 132 | 203 | 210 | 222 | 236 | 300 |
Thickness of Bolester | m.m. | 55 | 63 | 63 | 76 | 89 | 102 | 102 | 115 | 127 |
Opening In Bolester (Dia.) | m.m. | 76 | 82 | 102 | 125 | 198 | 203 | 215 | 230 | 250 |
Fly Whieel Dia. | m.m. | 425 | 508 | 558 | 660 | 812 | 914 | 1016 | 1065 | 1220 |
Stroke Per Minute | Nos. | 70 | 60 | 60 | 55 | 50 | 40 | 30 | 30 | 25 |
Electric Motor. (1440 Rpm) | H.P. | 1 | 2 | 3 | 5 | 7.5 | 10 | 15 | 20 | 25 |
Floor to Top of Bed | m.m. | 720 | 750 | 750 | 800 | 875 | 863 | 863 | 863 | 863 |
Height | m.m. | 1450 | 1650 | 2050 | 2625 | 3125 | 3375 | 3550 | 3975 | 4125 |
Left to Right | m.m. | 610 | 725 | 775 | 1050 | 1225 | 1425 | 1650 | 1975 | 2120 |
Front to Back | m.m. | 775 | 925 | 1025 | 1350 | 1625 | 1875 | 2050 | 2250 | 2300 |
Keeping ourselves abreast of sophisticated process technology, we manufacture high standard cross shaft presses, that are popular amidst our clients for uncompromising quality and high functionality. These presses are available in a rigid steel configuration, which keeps the stress & deflection within the permissible limits and ensures the maximum strength even unber the highest load. Shaft of these presses is ground finished on bearing surfaces. These presses undergo testing prior to dispatch to our clients. We also entertain the clients queries to customize our range as per their specifications.
Features :
The salient features of our cross shaft presses are mentioned below: High Performance Resistant to corrosion Low power consumption High tensile strength Easy maintenance
Cross Shaft Power Presses:
We manufacture engineered pressing machines, cross shaft machine with following features.
Features :
Fully enclosed driveFront stroke adjustmentLarge slide face & bed area Hhr Gears operating in oil bathCompact & rigid constructionWidely spaced long gibs hold slide in accurate alignment
Model | RX-25 | RX-35 | RX-45 | RX-60 | RX-80 | RX-110 | RX-160 | RX-200 | RX-250 | ||||||||||||||||||||||||
S | H | P | S | H | P | S | H | P | S | H | P | S | H | P | S | H | P | S | H | P | S | H | P | S | H | P | |||||||
Capacity | 25 | 35 | 45 | 60 | 80 | 110 | 160 | 200 | 250 | ||||||||||||||||||||||||
Length of Stroke (D)mm |
80 | 50 | 35 | 90 | 60 | 40 | 110 | 70 | 45 | 130 | 80 | 50 | 150 | 100 | 60 | 180 | 110 | 70 | 200 | 130 | 80 | 220 | 150 | 90 | 250 | 180 | 110 | ||||||
|
90 | 110 | 140 | 80 | 100 | 130 | 70 | 90 | 120 | 60 | 80 | 100 | 60 | 80 | 100 | 50 | 70 | 90 | 40 | 60 | 80 | 35 | 50 | 65 | 30 | 45 | 55 | ||||||
70 | 80 | 80 | 60 | 70 | 80 | 50 | 60 | 80 | 40 | 55 | 70 | 40 | 50 | 65 | 35 | 45 | 60 | 30 | 35 | 50 | 25 | 30 | 40 | 22 | 30 | 30 | |||||||
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |||||||
110 | 140 | 180 | 95 | 130 | 170 | 85 | 120 | 160 | 75 | 110 | 150 | 75 | 100 | 140 | 65 | 90 | 125 | 50 | 70 | 100 | 45 | 60 | 85 | 40 | 50 | 70 | |||||||
Tonnage Rating Point (B.D.C.)mm |
3.2 | 2.3 | 3.2 | 2.3 | 3.2 | 2.3 | 4 | 2.3 | 5 | 3.2 | 5 | 3.2 | 6 | 4 | 6 | 4 | 6 | 4 | |||||||||||||||
Die Height (D.H)mm |
230 | 200 | 200 | 250 | 220 | 220 | 270 | 240 | 240 | 300 | 270 | 270 | 330 | 300 | 300 | 350 | 320 | 320 | 400 | 360 | 360 | 450 | 400 | 400 | 450 | 400 | 400 | ||||||
Adjustment of Slide (G)mm |
50 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | ||||||||||||||||||||||||
Area of Slide (PxQ)mm |
330×250 | 380×300 | 430×350 | 480×400 | 560×460 | 650×520 | 720×580 | 860×650 | 960×720 | ||||||||||||||||||||||||
Diameter of Shank Hole mm |
Ø38.1 | Ø50.8 | Ø50.8 | Ø50.8 | Ø50.8 | Ø50.8 | Ø65 | Ø65 | Ø65 | ||||||||||||||||||||||||
Area of Bolster (ExF)mm |
700×320 | 780×400 | 840×440 | 900×520 | 1050×600 | 1150×680 | 1250×760 | 1400×840 | 1500×900 | ||||||||||||||||||||||||
Thickness of Bolster (T)mm |
85 | 100 | 115 | 130 | 140 | 155 | 165 | 180 | 180 | ||||||||||||||||||||||||
Height of Bolster (Z)mm |
800 | 800 | 800 | 900 | 900 | 900 | 900 | 1000 | 1000 | ||||||||||||||||||||||||
Inside Measurement frame (R)mm |
394 | 490 | 516 | 544 | 610 | 670 | 730 | 900 | 970 | ||||||||||||||||||||||||
Motor Floor Side Adjustment HPxP |
- | - | - | 0.5×4 | 0.5×4 | 0.5×4 | 1×4 | 1×4 | 1×4 | ||||||||||||||||||||||||
Foot Size (AxB)mm |
750×1058 | 830×1125 | 890×1210 | 940×1315 | 1050×1480 | 1160×1680 | 1300×1985 | 1480×2113 | 1560×2400 | ||||||||||||||||||||||||
|
5x4 | 5x4 | 5x4 | 7 1/2x4 | 10x4 | 10x4 | 15x4 | 20x4 | 25x4 | ||||||||||||||||||||||||
5x4 | 5x4 | 7 1/2x4 | 10x4 | 10x4 | 15x4 | 20x4 | 25x4 | 30x4 | |||||||||||||||||||||||||
Motor for side adjustment HPxP | 5X4 | 5X4 | 5X4 | 7 1/2X4 | 10X4 | 10X4 | 15X4 | 20X4 | 25X4 | ||||||||||||||||||||||||
Foot size (AxB)m.m. | 5X4 | 5X4 | 7 1/2X4 | 10X4 | 10X4 | 15X4 | 20X4 | 25X4 | 30X4 | ||||||||||||||||||||||||
Position of Anchor Bolts(MxN)mm |
620×860 | 730×925 | 790×1010 | 840×1115 | 950×1230 | 1060×1380 | 1180×1655 | 1360×1755 | 1440×2000 | ||||||||||||||||||||||||
Floor Space Required(WxLxH)mm |
893×1280×2060 | 1000×1410×2180 | 1053×1490×2340 | 1100×1600×2540 | 1212×1820×2750 | 1325×2020×2985 | 1445×2325×3315 | 1625×2455×3715 | 1705×2790×3982 | ||||||||||||||||||||||||
Accuracy | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | CNS 1st | ||||||||||||||||||||||||
Capacity | 2.2 | 2.2 | 3.5 | 3.5 | 6 | 8 | 10 | 14 | 14 |
Length of Stroke mm | 50 | 50 | 70 | 70 | 80 | 90 | 100 | 110 | 120 |
Area of Pad mm | 300×210 | 300×210 | 340×234 | 340×234 | 410×260 | 480×320 | 540×340 | 640×440 | 740×540 |
|