Verified
Write a Review
Our Products
Cupboard
2 Products availableLeading Manufacturer, Supplier & Retailer of VORTEX SHAKER CYCLO MIXURE, GEL ROCKER PLATFORM, VORTEX SHAKER CYCLO MIXURE, WATER BATH RECTANGULAR D0UBLE WALLED and WATER STIIL TABLE PATTERN BARNSTEAD TYPE.
RS00S0102 MAGNETIC STIRRER (WITH HOT PLATE) These apparatus are intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjust with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is Controlled by Energy Regulator. Features: Space efficient design support that makes these ideally suited for bench tops as well as inside of bio-hoods Allows heating as well as stirring to be performed simultaneously DC motor support that provides for stable speed at start as well as low heat emissions Heater capacity provided in 550W which offers for rapid heating support Specifications: Case made available in MS and Aluminum metal finish with support of heat cured epoxy coating Top heating plate stainless steel Display provision of stirring speeds Four stirring modes for - o Constant speed, clockwise o Constant speed, counter clockwise o Auto reversing mode for slow acceleration & fast acceleration Memory feature that allows stirrer to operate exactly as before switch off Outputs protected against overloading through limiting circuit Heater capacity of 300W for allowing rapid heating Capacity of 2 Liter, 5 Liter, 10 Liter, 20 Liter Works on electric supply of 220/230 Volts, 50/60 Hz AC
We are a major Manufacturer and Supplier of Rotary Shaker. Rotary Shaker is completely designed for continuous shaking of solutions in conical flasks from 50 to 1000 ml capacity. Rotary Shaker is mounted on frame and tabletop is fitted with rubber discs mounted on ball bearing cranks shafts to give an orbital motion to the flasks, within a diameter of approximately 2. The motor of the Rotary Shaker is driven by V belt & the speed is controlled by mechanical speed controller. The Rotary Shaker works on 220 Volts AC.Provided with M.S/ S.S. Top.
Sizes :
We are a reliable Manufacturer and Supplier of Wrist Action Shaking Machine in Delhi. The Shaking Machine (Wrist Action) that we offer is recommended for precisely holding a range of flasks, the capacity of which goes from 100 ml to 1000 ml. Quality, precision, compliance, and durability are some of the best attributes of the machine that we offer. It can be obtained from us in custom specifications.
Details
The machine is constructed to hold flasks from 100 ml. to 1000 ml. The shaking speed action is variable and is controlled by speed regulator fitted with fractional H.P. Motor to work on 220 Volts AC complete with cord and plug. Provided with / without Platform
We are engaged in manufacturing and supplying of Magnetic Stirrer (RS00S0102). Magnetic Stirrer is intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Magnetic Stirrer can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjusted with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is controlled by Energy Regulator. Capacity :
We are a celebrated Manufacturer and Supplier of Water Bath Incubator Shaker in Delhi. The Water Bath Incubator Shaker (Metabolic Shaker), offered by us, is a desktop model, especially brought forth for studies and research. It is tested on all crucial parameters such as performance, lifespan, efficiency, etc. It is doled out in varying sizes and specifications, as per the client’s requirement.
Details
Desktop model designed for studies on tissue metabolism, Enzymes and protein coagulation or other experiments required shaking of subject matter at constant speed under controlled Temperature environment. It is a walled unit inside made of thick S.S. Sheet and outer of M.S. Sheet Duly powder coated. The paramedical lid of S.S. Prevents falling of Condensed water droplets on the Specimens. Heating is achieved through an immersion type heater and the temperature is controlled By DIGITAL TEMP. Indicator cum controller with an accuracy of ± 0.5° C, the bath has an oscillating. Tray riding on ball rollers oscillated through a geared variable speed motor shaking speed range is is between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or Erlenmeyer flasks Of 25 ml or 50 ml or 100 ml or 250 ml or 500 ml or 1000 ml. As per ordered by the users. (Kindly the Capacity of the flasks while ordering). Supplied complete with one shaking tray, paramedical cover, co and plug, to work on 220/230 volts A.C. Supply Available with heating arrangement only (having Temperature range from ambient to 100°C, ) or with both heating and cooling arrangements (having Temperature range from 5°C, to 100°C, )
Size
We are an expert Manufacturer and Supplier of Lyophilizer (RS00G0111). Lyophilizer is housed in a super structure steel frame it is mounted on swivel casters. The Lyophilizer comes with Perspex see though lid, gasket and control instrument i.e. Microprocessor Based Digital Temperature controller for measurement of Temperature and Electronic Vacuum Indicator. The unit is made out of hermetically sealed compressor and with 100 liters/ min direct motor drive rotary vane type vacuum pump of double stage With Air ballast having ultimate vacuum of less than 50 microns in the system and 10 microns on pump Head. Condenser Trap: All non-magnetic Stainless steel fabricated, argon welded, dished-bottom for complete effluent removal. Refrigeration coils made of copper bonded to outside of condenser heavily Insulated, up to (-) 40oC, at ambient temperature of 20oC, is maintained through a MICROPROCESSOR BASED DIGITAL TEMPERATURE INDICATOR. Vacuum Drum has 6 or 12 port manifold (main driving Chamber) made of stainless steel non-magnetic grade with Perspex top cover. (CFC FREE AND PUFF INSULATED) Capacity :
We are a reliable Manufacturer and Supplier of Laminar Air Flow Bench (RS00C0101). Laminar Air Flow Bench is provided to give clean air to any laboratory. The Laminar Air Flow Bench is useful where any hyper critical work has to be performed within minimum contamination as they assure 99.97% removal of airborne particles as 0-3 microns in the work area. The basic elements are pre-filters, heavy duty blower assembly; HEPA (high Efficiency particular Air) filter (Absolute filter) fresh air is drawn through the pre-filter and passes to absolute HEPA filter. Ultra clean air moves horizontally in Laminar Air Flow Bench across the work area at a velocity of approximate 90; ± 20 feet per minute. Construction : Basic material is Doro board wood front back top and exterior surfaces are covered with Formica, All interior surfaces are epoxy painted filter seat is carefully formed, installed and checked for leakage. Work table is made of Mica top and side panels are made of 6 mm thick glass transparent framed in anodized Aluminum angle frame. Blowers are fitted with 1/4 H.P. Electric Motor operates with minimum noise and vibration. Suitable to operate on 220 Volts 50 Cy. AC supply. Complete with HEPA Filters, Prefilters, Motor Blower, Manometer, Gas Cock, Transparent Acrylic Sheet Front and Side Doors.
The company is a chief Manufacturer and Supplier of Rotary Vacuum Evaporator (RS00V0101). Rotary Vacuum Evaporator consists of evaporating flask by rotated by heavy duty motor in a heating water bath (Optional). Vacuum distillation of solvent at high and low temperature is achieved quickly and efficiently by the use of a variable speed motor, which prevents foaming and bumping of the liquid solvent into the evaporating flask and also distillation under controlled atmosphere. The evaporating flasks is pear shaped to give a large surface area of evaporation and is clamped to a glass duct which goes through the drive unit and protrudes about 120 m.m. into the condenser, the condenser is fitted with Standard joint at the bottom for receiver flask. The unit is fitted with a quick action jack. Capacities :
Optional Accessories :
RS00S0108 SIEVE SHAKER TABLE TOP (SOUNDLESS, VIBRATION TYPE) Fitted with F.H.P Electric motor. It can accommodate 6 test sieves of 8 dia with lid and pan. Speed can be regulated through variable speed regulator to work on 220 volts AC. (WITHOUT TEST SIEVES) Size (a) 8 Dia (b) 12 Dia
We are engaged in making available never-failing Kjeldahl Distillation & Digestion Combined Unit (without glass part). We are associated with the league of #1 Manufacturers and Suppliers of Kjeldahl Distillation & Digestion Combined Unit in Delhi. Each unit, which rolls off our manufacturing unit, is ensured to work safely and efficiently. And the guarantee of quality is an assured thing to benefit from our products.
We are engaged in making available never-failing Kjeldahl Distillation & Digestion Combined Unit (without glass part). We are associated with the league of #1 Manufacturers and Suppliers of Kjeldahl Distillation & Digestion Combined Unit in Delhi. Each unit, which rolls off our manufacturing unit, is ensured to work safely and efficiently. And the guarantee of quality is an assured thing to benefit from our products.
Our company is a notable Manufacturer and Supplier of Rectangular Muffle Furnace (RS00F0101). The Rectangular Muffle Furnace is light Weight and comes with a maximum Temperature of 1000oC and working temperature up to 900oC. Heating is done by Embedded Heater run around the chamber & controlled by Energy Regulator ± 5oC or Digital Temperature Indicator cum Controller. The outer body of the Rectangular Muffle Furnace is made of thick mild steel duly painted. The apparatus is complete with pyrometer. Thermo-couple, silver fuse, two Neon lights with wire and plug to work on 220/230 Volts AC, (with Silicone Fiber insulation). Sizes :
RS00S0109 VORTEX SHAKER ( CYCLO MIXURE) To accelerate the mixing of solution in test tubes. Short, rapid, eccentric stroke, motor driven Neoprene cup imparts vigorous agitation to tubes or small flask held in or against it. Particularly efficient for dislodging sediments from tips of centrifuge tube. The vacuum rubber at bottom prevents the machine from walking. Fitted with speed control arrangement.
Features : Comes with support of powder coated body Features touch manual mode Comes with support of test tube and bottle mixing Comes with touch/manual mode options Work on 220 v ac current Unit providing for quick as well as thorough mixing of liquids in flasks, test tubes as well as bottles Mixer comprising enamel finished housing that contains motor support with eccentric drive to rubber buffer on top Tube held against vibrating buffer with agitation intensity controlled through varying positions in which test tube is held Thyristorised speed controller that provides for step less adjustment of oscillation degree Technical
Details : Powder coated body Touch manual mode Touch / manual mode Work on 220 v ac
We are a prominent Manufacturer and Supplier of Vertical Autoclave (RS00A0101). Vertical Autoclave is used for sterilization under saturated steam pressure at any selected point between 5 and 20 p.s.i. The Vertical Autoclave is a double walled unit with inner chamber (Boiler) made up of 18 S.W.G. stainless steel and outer chamber made of SS sheet covered with S.S. lid along with radial locking system. The Vertical Autoclave is fitted with neoprene rubber gasket, and all its systems are hydraulically tested. All autoclaves are fitted with standard accessories such as water level indicator, pressure gauge, steam release cock, spring-loaded safety valve and heating element. The Vertical Autoclave is supplied with S.S. basket and vacuum breaker device, cord and plug, to work on 220/230 volts A.C. Supply.
The company is a trustworthy Manufacturer and Supplier of Orbital Incubator Shaker (RS00S0104). Orbital Incubator Shaker comes with a better quality S.S 304 grade inner chamber & the outer chamber is fitted with flexi glass inner door (can see flexi glass cover). The Orbital Incubator Shaker has powerful air circulation for temperature uniformly Digital RPM/Temperature indicator having pre set facility, universal platform having interchangeable clamps of assorted size for difference capacities of flasks. Refrigerated model with 24 hrs. Timer/ Digital/ UV Light/ 2 Illumination variable speed 20-250 RPM. Dimensions :
Additional Information:
Payment Terms :
Delivery Time : 25 days
The Seed Germinator that we offer is reckoned an exemplary device used for normal germination application mainly. It is employed for plant growth, biological studies, forestry research, etc. The germinator’s attributes are enormous, including fine finishing, high quality, and durability. We are emerging as the leading Manufacturer and Supplier of Seed Germinator in Delhi. We can offer it suited to the client’s specific requirements.
Applications
Salient Features & Construction
Details
| Operations | Nearly silent operation with ultra-low vibration |
|---|---|
| Voltage Indicator | By Volt Meter fitted on Panel |
| Electric Supply | 220/230V AC, 50/60Hz |
Technical Specification
| Workable Chamber Size | 900 x 500 x 600 mm |
|---|---|
| Approx Volume (Ltr) | 310 ltrs |
| No. of Trays | As per required |
| Temperature Range | 5°C to 60°C in Cooling Models |
| Temp. Controller | By Microprocessor Based PID Digital Temperature Indicator cum Controller. |
| Temp. Accuracy | +1°C |
| Display: | LED Display for Set Value(SV) and Process Value (PV) |
| Humidity | Created in a S.S. water reservoir fitted at the bottom to provide 90% to 95% ±3 % RH |
| Relay | Solid state electronic relay with protective heat sink. |
| Air Circulation | By forced convection system |
| Insulation | By Glass Wool / PUF Insulation (High density) |
| Operations | Nearly silent operation with ultra-low vibration |
| Voltage Indicator | By Volt Meter fitted on Panel |
| Electric Supply | 220/230V AC, 50/60Hz |
Optional Features
| Controlling of Temperature | By Profile Digital Microcontroller having 4 Programmers each of16 steps (total 64 steps of ramp / soak profile) |
|---|---|
| PLC Based Control Systems | With Touch Screen Display with Direct Thermal / Dot Matrix Printer. |
| LCD Controller with Data Logger | (16 x 2) with optional RS-485 communication ports, cables, window based software with inbuilt data recording. |
| Communication Port | Communication Port with interface and data cable to download data to your PC. |
| Lighting system | By interior illumination with 3 fluorescent tubes of 60 cm. (20 Watts) placed vertically along back wall Temp. 10°C to 60°C` |
| Timer | With reverse 0 - 24 hours for regulating hours of light and darkness including fitting at the top of incubator. |
| Regulated Voltage | By Voltage Stabilizer Automatic |
We are one of the eminent Manufacturers and Suppliers of Vertical Deep Freezer in Delhi. Ours is a name to rely upon whenever looking for Vertical Deep Freezer of the finest grade. These premium freezers are efficient enough to perform way beyond the expectations. As far as the quality of the freezers is concerned, we do not leave any scope for doubts as we conduct various tests to warrant it.
Technical Specification
| Temperature range (in AC Room) | Ambient to -20oC or -30oC |
|---|---|
| Temperature Accuracy | +1oC |
| Outer | Powder Coated CRC Steel Sheet |
| Inner | Chamber and trays made of Stainless Sheet (SS-304) |
| Insulation | High Density PUF insulation for tighter temperature controls. |
| Temperature Control | Microprocessor based Digital Temperature Indicator-cum-Controller with in-built HI/LOW Temperature deviation alarm. |
| Display | Digital LED/LCD Set value (SV) & Process value (PV) (as per ordered) |
Ordereing Information
| MODEL | VOLUME | CAPACITY |
|---|---|---|
| #VDF-4 | 4.0 Cuft | 112 ltrs |
| #VDF-6 | 6.0 Cuft | 171 ltrs |
| #VDF-10 | 10.0 Cuft | 280 ltrs |
| #VDF-12 | 12.0 Cuft | 340 ltrs |
| #VDF-15 | 15.0 Cuft | 420 ltrs |
| #VDF-16 | 16.0 Cuft | 450 ltrs |
| #VDF-18 | 18.0 Cuft | 500 ltrs |
| #VDF-20 | 20.0 Cuft | 560 ltrs |
We are an adept Manufacturer and Supplier of Distilled Water Still in Delhi. The Water Still (Wall Mounting), we make available, is employed in making the distilled water pyrogen free and hence, immensely pure. It is made of heavy-duty SS of the 304 grade, in accordance with the standards. It is finished to perfection with argon arc welding. It can be acquired in varying capacities and load options.
Details
The unit is recommended for making pyrogen free distilled water of a very high degree of purity. Made out Of S.S. special kittle element is fitted with Ejection Device / Auto Cut for safety of the element in case Water supply is stopped. The cock fitted to the unit is of brass C.P. A wall mounting clamp is provided with the unit but without rubber tubing. Supplied with cord and plug to work on 220/230 volts A.C. Supply. (S.S. 304 GRADE ARGON ARC WELDED)
Technical Specification
| Capacity | Load |
|---|---|
| 2 ltrs / hr | 2.0 KW |
| 4 ltrs / hr | 3.0 KW |
| 6 ltrs / hr | 4.5 KW |
| 8 ltrs / hr | 6.0 KW |
| 10 ltrs / hr | 7.0 KW |
For unattended grinding of no gummy and non-fibrous material. Extensively used for preparing coal sample for calorific tests the motor revolves and the pestle moves back and forth in a pattern reaching all parts of the motor. Its metallic housing with a F.H.P motor driven detachable turn able of cast aluminum has adjustable posts to hold motor of 75 to 135 mm dia. The arm of the pestle driving mechanism has hinged, heavy head, which can be raised to inspect or remove the sample or additional material to be added as desired. A built-in-timer permit selection of grinding operation up to 60 min.
The grinding vessel and motor are all completely covered by a clean acrylic cover. To operate 220V AC
RS00G0113 DE-HUMIDIFIER DRY AIR Dehumidifier are water condensing type, base on Refrigeration cycle to avoid use of expensive chemicals required for desiccant type models. The unit is self standing and is mounted on a study angle iron frame, fitted with caster wheels. Dehumidifier removes excess moisture from the atmosphere and it fitted with hermetically sealed compressor. Heat exchanger and water condensed coils are made of copper. Water collection tank is provided below the unit to collect condensate water. Humidity is controlled by automatic HUMIDISTATE incorporated in the unit, upto30%+3%RH, depending upon. The ambient conditions. With the dehumidifier heat load in the room. Suitable to work on 220/230voltsA.C supply a) CAPACITY: 1.5 Tone ANALOUGE MODEL b) Outer body made of S.S. 304- Grade. c) CAPACITY: 1.5 Tone DIGITAL HUMIDISTATE d) Outer body made of S.S. 304 Grade
Rajat Hans (M/s Rajat Scientific Instruments)
J - I I / 13, Sanjay Market, Wazirpur, Delhi - 110052, India
Share us via
View Contact Number 
