RS00S0102 MAGNETIC STIRRER (WITH HOT PLATE) These apparatus are intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjust with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is Controlled by Energy Regulator. Features: Space efficient design support that makes these ideally suited for bench tops as well as inside of bio-hoods Allows heating as well as stirring to be performed simultaneously DC motor support that provides for stable speed at start as well as low heat emissions Heater capacity provided in 550W which offers for rapid heating support Specifications: Case made available in MS and Aluminum metal finish with support of heat cured epoxy coating Top heating plate stainless steel Display provision of stirring speeds Four stirring modes for - o Constant speed, clockwise o Constant speed, counter clockwise o Auto reversing mode for slow acceleration & fast acceleration Memory feature that allows stirrer to operate exactly as before switch off Outputs protected against overloading through limiting circuit Heater capacity of 300W for allowing rapid heating Capacity of 2 Liter, 5 Liter, 10 Liter, 20 Liter Works on electric supply of 220/230 Volts, 50/60 Hz AC

We are engaged in manufacturing and supplying of Magnetic Stirrer (RS00S0102). Magnetic Stirrer is intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Magnetic Stirrer can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjusted with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is controlled by Energy Regulator. Capacity :

• 750 ml
• 1 ltr. S.S.Top
• 2 ltr. S.S.Top
• 5 ltr. S.S.Top
• 10 ltr. S.S.Top

RS00S0101 LABORATORY STIRRERS The motor stirrer having maximum speed up to 4000 RPM unit is clamped to a C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and Noiseless operation. Available with or without Drill-Chuck. a) Mini Stirrer with Regulator b) 1/20 HP high speed 4000 RPM with regulator c) All of (b) with Teflon stirring shaft with speed regulator. d) 1/8 HP High speed motor with Electronic regulator e) HP motor with Electronic regulator f) HP motor with Electronic Speed Regulator (REMI) g) 1/20 Geared Stirred h) 1/8 Geared Motor Stirrer with speed regulator

RS00S0102 MAGNETIC STIRRER (WITH HOT PLATE) These apparatus are intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Each apparatus of this group can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjust with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is Controlled by Energy Regulator. Features: Space efficient design support that makes these ideally suited for bench tops as well as inside of bio-hoods Allows heating as well as stirring to be performed simultaneously DC motor support that provides for stable speed at start as well as low heat emissions Heater capacity provided in 550W which offers for rapid heating support Specifications: Case made available in MS and Aluminum metal finish with support of heat cured epoxy coating Top heating plate stainless steel Display provision of stirring speeds Four stirring modes for - o Constant speed, clockwise o Constant speed, counter clockwise o Auto reversing mode for slow acceleration & fast acceleration Memory feature that allows stirrer to operate exactly as before switch off Outputs protected against overloading through limiting circuit Heater capacity of 300W for allowing rapid heating Capacity of 2 Liter, 5 Liter, 10 Liter, 20 Liter Works on electric supply of 220/230 Volts, 50/60 Hz AC

We are engaged in manufacturing and supplying of Magnetic Stirrer (RS00S0102). Magnetic Stirrer is intended for stirring solutions of low viscosity in open or closed vessels. Stirring is accomplished by a magnetized Teflon coated paddle to be placed in the container. Magnetic Stirrer can be operated on a bench, a stand or a laboratory scaffold as well. The intensity of stirring, depending on requirements, can be adjusted with the thyristorised voltage controller incorporated which also ensures steeples adjustments from very low to the maximum agitation & Heating is controlled by Energy Regulator. Capacity :

• 750 ml
• 1 ltr. S.S.Top
• 2 ltr. S.S.Top
• 5 ltr. S.S.Top
• 10 ltr. S.S.Top

RS00S0101 LABORATORY STIRRERS The motor stirrer having maximum speed up to 4000 RPM unit is clamped to a C.P. rod fitted on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and Noiseless operation. Available with or without Drill-Chuck. a) Mini Stirrer with Regulator b) 1/20 HP high speed 4000 RPM with regulator c) All of (b) with Teflon stirring shaft with speed regulator. d) 1/8 HP High speed motor with Electronic regulator e) HP motor with Electronic regulator f) HP motor with Electronic Speed Regulator (REMI) g) 1/20 Geared Stirred h) 1/8 Geared Motor Stirrer with speed regulator