Post Buy Requirement
RP
Pune, Maharashtra, India
Add Review

Dryers #109529

Steam Tube Dryer

Steam Tube Bundle Dryers are based on the conduction mode for drying. The product to be heated and dried only contacts steamheated tubes, and not directly steam. Tube bundles are operated on the counter-flow principle (i. e. steam flows in the direction opposite t0 the direction of the material flow). The Tube Bundle Dryers are designed by considering the wet and dry product flow characteristics, lump crust formation tendency and thermal sensitivity of the material in dry condition.
View Complete Details

Paddle Dryer

  • Feature Continuous production machine without human touch.
The wet feed is continuously agitated by the heated rotating blades, thus exposing new areas to heating surfaces. This results in the moisture boiling off and rendering the material to dry to the required degree.Minimum exhaust air quantity no elaborate air cleaning equipment needed.
View Complete Details

Rotary Dryers

Rotary dryers are used for drying wet powders and cakes, which are easily breakable and dispersible. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.
View Complete Details

Industrial Dryers

  • Capacity 100kg/hr to 50000kg/h
  • temperatures 600°C.
Rotary dryers are used for drying wet powders and cakes, which are easily breakable and dispersible. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.
View Complete Details

Spin Flash Dryer

This consists of a horizontal agitator, which disperses the feed while it comes in contact with the hot air and gets dried. Flash dryers are used for drying of wet cakes which are sensitive to heat. There are different variations of flash dryers available depending upon the need to disperse the wet cake or pastes. These are:
View Complete Details

Rotary Vacuum Dryer

Rotary Vacuum Dryer consists of cylindrical jacketed vessel with a central agitator having specially designed blades. In Rotary Vacuum Dryers the indirect heating is achieved by circulating hot water, Thermic oil or steam through the jacket. The agitator design is optimized so as to bring every particle in contact with the heated surface while rotating. This helps to achieve uniform temperature throughout the batch thereby preventing the re-condensation inside the drying chamber since there are no cold spots, and contributes to rapid drying speed and eliminates caking. A high vacuum is maintained, while the material is in motion permitting the drawing off of moisture or vapour under desired conditions.
View Complete Details

Industrial Spray Dryer

  • Capacity 1kg/hr to 18, 000 kg/hr
Spray dryers are offered for feeds in liquid form containing either water or any other solvent. Feeds may be solution, slurry or emulsion. Depending on the particle size of the final product required and the nature of feed any one or combination of following atomization system is used.The final product obtained from spray dryer is in powder form. By varying the operating parameters of the spray dryer the required powder characteristics such as moisture, particle size, bulk density, flowability, Particle Morphology etc. can be achieved.
View Complete Details

Fluidized Bed Dryer

The process air is supplied to the bed through a special perforated distributor plate and flows through the bed of solids at a velocity sufficient to support the weight of particles in a fluidized state. Bubbles form and collapse within the fluidized bed of material, promoting intense particle movement. In this state, the solids behave like a free flowing boiling liquid
View Complete Details

Ddgs Dryers

  • Feature Operation is fully automatic with low maintenance, Reduced wear and tear of parts.
Steam Tube Bundle Dryers are based on the conduction mode for drying. The product to be heated and dried only contacts steamheated tubes, and not directly steam. Tube bundles are operated on the counter-flow principle (i. e. steam flows in the direction opposite t0 the direction of the material flow). The Tube Bundle Dryers are designed by considering the wet and dry product flow characteristics, lump crust formation tendency and thermal sensitivity of the material in dry condition.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Raj Process Equipments And Systems Private Limited (Raj Process Equipments And Systems Private Limited)
  • Jai Ganesh Vision, 'B' Wing, 3rd Floor, Jai Ganesh Fame Building, Akurdi, Pune, Maharashtra - 411035
  • Share us via
Retailer of Dryers from Pune, Maharashtra by Raj Process Equipments And Systems Private Limited
Post Buy Requirement
RP

Raj Process Equipments And Systems Private Limited Pune, Maharashtra

Pune, Maharashtra, India
Add Review

Dryers #109529

We offer a complete product range of Steam Tube Dryer, Paddle Dryer, Rotary Dryers, Industrial Dryers and Spin Flash Dryer

Steam Tube Dryer

Steam Tube Bundle Dryers are based on the conduction mode for drying. The product to be heated and dried only contacts steamheated tubes, and not directly steam. Tube bundles are operated on the counter-flow principle (i. e. steam flows in the direction opposite t0 the direction of the material flow). The Tube Bundle Dryers are designed by considering the wet and dry product flow characteristics, lump crust formation tendency and thermal sensitivity of the material in dry condition.
View Complete Details

Paddle Dryer

  • Feature Continuous production machine without human touch.
The wet feed is continuously agitated by the heated rotating blades, thus exposing new areas to heating surfaces. This results in the moisture boiling off and rendering the material to dry to the required degree.Minimum exhaust air quantity no elaborate air cleaning equipment needed.
View Complete Details

Rotary Dryers

Rotary dryers are used for drying wet powders and cakes, which are easily breakable and dispersible. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.
View Complete Details

Industrial Dryers

  • Capacity 100kg/hr to 50000kg/h
  • temperatures 600°C.
Rotary dryers are used for drying wet powders and cakes, which are easily breakable and dispersible. The rotary dryer consists of a rotating drum with angle lifting blades which lift the feed as the drum rotates and showers it in the stream of hot air flowing through the drum.
View Complete Details

Spin Flash Dryer

This consists of a horizontal agitator, which disperses the feed while it comes in contact with the hot air and gets dried. Flash dryers are used for drying of wet cakes which are sensitive to heat. There are different variations of flash dryers available depending upon the need to disperse the wet cake or pastes. These are:
View Complete Details

Rotary Vacuum Dryer

Rotary Vacuum Dryer consists of cylindrical jacketed vessel with a central agitator having specially designed blades. In Rotary Vacuum Dryers the indirect heating is achieved by circulating hot water, Thermic oil or steam through the jacket. The agitator design is optimized so as to bring every particle in contact with the heated surface while rotating. This helps to achieve uniform temperature throughout the batch thereby preventing the re-condensation inside the drying chamber since there are no cold spots, and contributes to rapid drying speed and eliminates caking. A high vacuum is maintained, while the material is in motion permitting the drawing off of moisture or vapour under desired conditions.
View Complete Details

Industrial Spray Dryer

  • Capacity 1kg/hr to 18, 000 kg/hr
Spray dryers are offered for feeds in liquid form containing either water or any other solvent. Feeds may be solution, slurry or emulsion. Depending on the particle size of the final product required and the nature of feed any one or combination of following atomization system is used.The final product obtained from spray dryer is in powder form. By varying the operating parameters of the spray dryer the required powder characteristics such as moisture, particle size, bulk density, flowability, Particle Morphology etc. can be achieved.
View Complete Details

Fluidized Bed Dryer

The process air is supplied to the bed through a special perforated distributor plate and flows through the bed of solids at a velocity sufficient to support the weight of particles in a fluidized state. Bubbles form and collapse within the fluidized bed of material, promoting intense particle movement. In this state, the solids behave like a free flowing boiling liquid
View Complete Details

Ddgs Dryers

  • Feature Operation is fully automatic with low maintenance, Reduced wear and tear of parts.
Steam Tube Bundle Dryers are based on the conduction mode for drying. The product to be heated and dried only contacts steamheated tubes, and not directly steam. Tube bundles are operated on the counter-flow principle (i. e. steam flows in the direction opposite t0 the direction of the material flow). The Tube Bundle Dryers are designed by considering the wet and dry product flow characteristics, lump crust formation tendency and thermal sensitivity of the material in dry condition.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Raj Process Equipments And Systems Private Limited (Raj Process Equipments And Systems Private Limited)
  • Jai Ganesh Vision, 'B' Wing, 3rd Floor, Jai Ganesh Fame Building, Akurdi, Pune, Maharashtra - 411035
  • Share us via