Our Products
Fortin's Barometer Phy:004 A superior standard mercury barometer suitable for altitudes upto 600 meters. The barometer has a nominal bore of 7mm. graduated scales covering 675 to 810mm.Hg and 26 to 32 inch Hg. The scale of are screw fastened to metal frame at the top of the tube. A vernier reading 0.05mm Hg. and 0.002 inch Hg. provided with an adjustable knob is mounted between the two scales. The reservour has a standard type of adjustment screw and index, and the barometer fitted with - 10 to 50 deg. C thermometer mounted on a polished base.
Advanced Digital training systems:
SCOPE OF LEARNING: · Study and Construction of Various Digital Electronics Lab Experiment TECHNICAL SPECIFICATIONS: Power Supplies: · Operated on Mains power 230V, 50Hz +10% · DC Power Supplies IC Regulated 3V-15V, 500mA · DC Power Supplies IC Regulated 3V-30V, 500mA · DC Power Supplies Fixed +5V, 1A · DC Power Supplies Fixed -5V, 500mA Function Generator: · 0-1MHz Pulse Generator (TTL/CMOS) Components are mounted on the panels are: · Logic Inputs & Outputs 12 Bit · Buzzer as Continuity Tester · Logic Probe Inbuilt. · 7 Bit 2mm to 4mm Conversion Sockets. · Low Frequency Clock Generator 1Hz-10Hz. · Logic Low Frequency Mono Pulsar. · 2 Bit BCD To 7 Segment Indicators With Inputs A, B, C, D Inputs. · Breadboards: Unique solder - less large size, spring loaded breadboard consisting of one Terminal Strips with 640 tie points each and 2 Distribution Strips with 100 tie points each, totaling to 840 tie points. (Size: 55mm X 170mm approx). · SALIENT FEATURES: · Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols. · Fuse for Short Circuit protection · Instruction manual. · Connections are brought out through 2mm Brass Pins. · Patch Cords 2mm. · The trainer is housed in ABS Plastic cabinet. · Size of the trainer set 12”x10” OPTIONAL ACCESSORIES: · CRO. · Loose Components and IC’s OPTIONAL PLUG AND PLAY MODULES: · Logic Gates Modules · Binary Adder Modules · Multiplexer Modules · Shift Register Module · Counter Module · Encoder Module · Code Converter Module · Parity Checker and Generator Module · Flip Flop Modules · Boolean Algebra Module · Comparator, RAM and ALU Modules |
Digital trainer Module
SCOPE OF LEARNING: · Study and Construction of Various Digital Electronics Lab Experiment TECHNICAL SPECIFICATIONS: Power Supplies: · Operated on Mains power 230V, 50Hz +10% · DC Power Supplies IC Regulated 0-15V, 500mA · DC Power Supplies IC Regulated 0-30V, 500mA · DC Power Supplies Fixed +5V, 1A · DC Power Supplies Fixed -5V, 500mA Function Generator: · 0-1MHz Pulse Generator Components are mounted on the panels are: · Logic Inputs & Outputs 12 Bit · Buzzer as Continuity Tester · Logic Probe Inbuilt. · 7 Bit 2mm to 4mm Conversion Sockets. · Low Frequency Clock Generator 1Hz-10Hz. · Logic Low Frequency Mono Pulsar. · 2 Bit BCD To 7 Segment Indicators With Inputs A, B, C, D Inputs. · Breadboards: Unique solder - less large size, spring loaded breadboard consisting of one Terminal Strips with 640 tie points each and 2 Distribution Strips with 100 tie points each, totaling to 840 tie points. (Size: 55mm X 170mm approx). · SALIENT FEATURES:
|
· Front panel built with high class insulated Printed Circuit Board sheet with well printed circuits and symbols. · Fuse for Short Circuit protection · Instruction manual. · Connections are brought out through 2mm Brass Pins. · Patch Cords 2mm. · The trainer is housed in ABS Plastic cabinet. · Size of the trainer set 12”x10” OPTIONAL ACCESSORIES: · CRO. |
SCOPE OF LEARNING: Study of Use of DC Power Supplies · TECHNICAL SPECIFICATIONS: Power Supplies: · DC Dual Power Supply 30-0-30V DC, 2A · Operated on Mains power 230V, 50Hz +10% Digital Meters: · Voltmeter 200V DC (2Nos.) · Ammeter 20A DC (2Nos.) · Technical specifications: · Output voltage: · 0-30V and 0-(-30V)+1% continuously adjustable · Output current: 0-2A and 0-2A+1% continuously adjustable SALIENT FEATURES: · Different controls for voltage and current controls Fine and coarse controls for variation · Line Regulation is 0 .01%. +10% Line variation & load regulation is 0.05% from no load to full load · Our 3½ digit Digital Panel Meters are Compact panel meters for digital display of electrical quantities. · The output is short circuit protected with crossbar electronics fold back current limiting circuit. · Instruction manual. · Connections are brought out through 4mm Colored BTI-15 Terminals. · Power Supply is housed in Metal cabinet. · Size of Power Supply is Approx 17”x8” OPTIONAL ACCESSORIES: · Rheostat |
Automatic Knife Sharpener Microtome RMS-100Automatic Knife Sharpener provides a precise, efficient and safe method for honing Microtome Knives upto 140mm in length, equipped with automatic timer 0-60 min. to adjust sharpening time. It ensure a knife edge so perfect that no subsequent strooping is necessary. The knife edge is recodtioned to optimum sharpness which is so major importance to every laboratory, where material are routinely sectioned for microscopic examinations. The transparent plexi glass cover encloses the entire working mechanism and provides a safe dust and gritfree sharpening process. The knife strokes against a high frequency glass honing plate and after three exactly equivalent strokes on one side of knife edge, a cam follower automatically flips the knife and three strokes are honed on other side.
Input/output rating : 24 VDC/220VAC
Number of Discrete Inputs/Outputs:14 In /10 out High speed frequency : I0 to I7
Power Voltage:24 VDC
Output Control Voltage:Relay Out
Relay Maximum Resistive Load Rating:2 Amps at 24 VDC and 220 VAC
Programming Software:Connected component workbench V910.0
Plug in modules
Plug in modules | |||
2 channel Analog input module | 2 channel Analog output module | ||
Input rating | Voltage --------0-10V Current---------0-20mA | Output rating | Voltage --------0-10V Current---------0-20mA |
Centrifuge Tube - Conical Bottom (PP) Moulded in Polypropylene, these tubes are clear strong & safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 1200xG for 15 ml. tubes respectively.
WIFI CMOS Camera with C-Mount
WIFI camera and it adopts ultra-high performance CMOS sensor as the image-picking device. WIFI is used as the data transfer interface.
When the camera is attached to the eyepiece of a microscope and started, it will and generates a WiFi signal for sending high-resolution images from a microscope to WiFi-enabled devices such as smart phones, tablets, and computers with iOS, Android, OS X, Linux and Windows operating systems, streaming images to up to six devices simultaneously.
The camera includes imaging software for quantifying, measuring, and annotating images and for using with an interactive white board. It also works with the free, downloadable app for viewing, capturing, and editing images.
ProCAM 5 CMOS Camera'sElectronic Rolling Shutter: Welcome to the world of Microscopic imaging, Radical introduces range of world class economic camera ProCam. Series of camera included resolution of 1.3 Megapixels to 10 Megapixels, to suit your specific application. ProCam can be directly interface with Trinocular port of any Stereo-zoom, Biological , Metallurgical of Measuring Microscope with a 0.5x ccd adaptor, making compatible with most of microscope. ProCam a Sceintific grade camera with high-fidelity color reproduction, one click image acquisition and storage capabilities. It comes along with Stand Alone software & Twin acquisition drives to ease software integration with any Image Analysis software also feature's Measurement tools, Annotation Tools, Calibration Tools & Image Editing Tools & lot more to ease your application. Feature of ProCam Capture & Measurement Software:-Image Capture, Time Lapse Imaging, Video CaptureFeatures:
Multi-fluorescence mode
Individual user profiles
Exposure control
Multi-camera operation
Image annotations
Programmable resolution
Measurement capabilities
Time-Lapse
Multi-Focus
Excellent Color reproduction
Superior image quality
Best price-performance ration Fields of Application:
Materialography
Pathology
Petrography
Hematology
Quality Control
Histology
Geology
Cell Biology
Mineralogy
Forensic
Features:
Large radius inside corners for easy clean up
Heavy gauge stainless steel & conveniences and state-of-the-art engineering.
Mounted on stainless steel tubular stand for providing maximum efficiency.
Provided with two body-supports of width 6" and head rest.
Chrome plated swing spout mixing faucet for hot and cold water and lever handle for waste & drain along with deep & large s. s. sink.
Intra-oral cameras are a proven tool used by dentists, for boosting patient awareness and case acceptance.
This camera is simple to use and provides crystal clear vivid images of the entire oral cavity. Also it can be used at home to get a real good look at what is going on inside one’s mouth. The image and video can be viewed on a computer monitor clearly. Users can take still photos or record a video.
Features:
Designed for PC interface with USB 2.0 & USB 1.1.
Plug in the USB port to your PC, Driver free function can auto install it.
To get Enhance mode, need to install the software.
The focusing range is 10mm30mm.
Digital Zoom : 5X sequence mode
Dynamic resolution up to 3M
Still image resolution up to 20M
Light source : In-built Ultra Bright White LED x4
1 Year Warranty
Comfortable Design: The ergonomic handle combined with a light balanced design makes it a pleasure to use.
Specification:
Water-proof: Available
Snap function: Available
Video record: Available
Live view: 30 frame / sec
Interface: USB 2.0 & USB 1.1
OS: Win XP, VISTA, Win 7
Usage:
1. You can check the teeth in the mouth, redness, skin texture, anti-aging, pigmentation, old age acne, pigmentation and other skin problems.
2. Application: Dental hospitals, dental clinics, Family Fare, beauty salons, leisure clubs, companies and other skin care services.
3 These cameras can also be used to detect coins and relics, circuit boards and other observations.
Package Included:
1 x Endoscopy host
1 x Software CD
1 x Disposable Protective Sleeve Bag
1 x Connector cable
This autoclavable rotatable multi rack moulded in polypropylene is a combination of four modules providing spaces for different sizes of test tubes and centrifuge tubes. These modules can be rotated in different directions to accommodate different types and sizes of tubes at the same time. These are available in four different sizes:
2 x 50ml
8 x 15 ml
6 x ml
10 x 12 mm tubes
These Storage Boxes, made of polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in three different sizes, these boxes have polypropylene caps, are autoclavable, provided good chemical resistance & heavy duty service. These boxes are available in following capacities:
Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.
Baby Weighing Balance Phy:0011 A single beam scale, robust steel body with epoxy powder coated parts. The beam carries a sliding weight to indicate the weight from 0 to 5kg in divisions of 20 grams each. One hanger and one slotted mass is provided to increase the capacity of the balance. When only the hangrt is suspended from the end of the beam the capacity increases to 10kg and the reading starts from 5kg onwards on the scale up to 10kg. On adding the slotted mass on the hnager the capacity increases to 15kg and the reading starts from 10kg onwards on the scale up to 15kg. The tray is detachable and can be easily replaced in position by sliding on to fixed plate. Second scale is provided which reads 0 to 1 kg in division of 10 gms. Making the total capacity balance 16 kg in to 10 gms. Image is just used for illustration purpose, product may vary at the time of delivery.
Paraffin Embedding Wax Bath Specification of Paraffin Embedding Wax Bath are following : Thermostatically controoled. Double walled with cupes and sleeves for glass tubes. Temprature up to 95 Degree C with accuracy of + 0.5 Degree to 1 Degree C
Low Retention Pipette Tips, Racked PP
These Micro Tips are offered in prefilled racks that do not require any manual accumulation in empty boxes.
Polypropylene racks are very robust, sturdy with consistent and thick wall thicknes.
Racks are hinged with transparent ld base providing excellent view insidethe box.
Racks ar stackable.
Can be used for repeat autoclaving.
Reusable once empty.Available in following capacities:
0.2-10 (Graduated)
0.2-10 Extended (Graduated)
2-200 (Bevelled Graduated)
2-200 (Ultra Point Tip Orifice)
2-300 (Graduated)
100-1000
Instrument Cabinet, Trolley & Filling Cabinet
ProgRes MF Scan (Monochrome) Microscopy Camera with Gryphax SoftwareGryphax Software Features:
Automatic & fast exposure control
Live Multifocus / Z-Stacking
Live Panorama / image stitching
Multi-Fluorescence
Video record
Time-lapse / image series
Real-time histogram
Real-time image enhancements:shrapness, noise, dynamic, colors
Meaurments with text annotations and marking
External image analysis
Individual device configuration
Image comparison
Optical status bar / scale / device name
Ideal for various industrial inspection applications. These are designed for precision and comfort at the same time these are Ergonomic, Energy efficient and Economical.
Digital Frequency counter
SALIENT FEATURES: Features: · 8digits green LED display · Selective range, high stability · Two Channels, operation mode memory · Range and gate time adjustable · Power supply: AC 110V/220V, +10%, Max. consumption : 5W
Technical Specification: · Frequency Range : 0.01Hz 2.4GHz · Cyclic Measurement Range : 0.5nS 10S · Attenuation : 20dB · Channel A (40MHz 2.4GHz) :Sensitivity: 50m VrmsInput resistance: 50ΩMaximum Input: 3V · Channel B (0.01Hz 40MHz) :Sensitivity: 30m VrmsInput resistance: 1MΩ (<35pF)Maximum Input: 30V · Accuracy : Time base error x Frequency+1Digit · Time Gate : 100ms 10s · Input Impedance : 1MΩ · Standard Accessories : Power Cord, Manual · Dimension :270 x 215 x 100mm |
These handy Jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs provided with a handle for easy & convenient lifting and have raised graduations for easy reading. These jugs are available in following capacities:
Features:
Complies with USP, IP specifications
Extremely useful for pharmaceutical labs
Microprocessor based, easy to use
20 x 4 line alphanumeric LCD display with backlit
16 Soft touch membrane type keys
Independent programmable setups for User & USP mode with storage
Rs232 Printer attachment facility
Automatically calculate result parameters like Tap Density, Initial Density, Compressibility Index and Hausner Ratio
Automatically stores last Result
Power Failure detection facility
User friendly operation with menus & current status indicators.
Features:
Simple & Easy to Operate
Narrow Band Interference Filters
Accurate Na, K, Ca, & Li Determination
Mixing Chamber Designed For Stable Flame
Concentric Non-Corrosive Nebulizer
Auto Ignition
Digital Flame Photometer is a simple & easy to operate instrument for determination of Sodium, Potassium, Calcium & Lithium. It is an ideal instrument for soil testing labs.The instruments are supplied in two units viz. Main Unit and Compressor Unit. The Main Unit comprises of digital displays, detector, filters and nebulizer. The compressor unit supplies the compressed air to the main unit
Air at a given pressure is passed into the atomiser. The suction produced by it, draws the sample solution into the nebulizer and is sprayed as fine mist into the flame. The light emitted by the element at the characteristic wavelength is isolated by the narrow band interference filters, which then falls on to the silicon photodiode. After signal conditioning of the photodiode output, it is sent to digital converter and the results are displayed directly in ppm/meq units. The narrow band interference filters are mounted on a rotating disc fitted within the Main Unit.Appropriate filter can be selected by rotating this disc with the thumb. The oil free compressor with regulator maintains a stable airflow.
pH/Conductivity/TDS/Salt/Temp Waterproof Tester is a microprocessor based tester used to determine pH, mV, Temperature, Conductivity, TDS and Salts in a liquid. This tester has wide applications in agriculture, anti-freeze recycling, aquarium, boiler, chemical industry, cooling tower, drinking water, fish farming, food industry, garden husbandry, hydroponics, laboratory usage, plating industry, swimming pool & spa, water treatment etc.It has rugged design for field use. It floats on water. It has Automatic Temperature Compensation (ATC) and is degree ºC/ºF switchable. It displays Maximum/Minimum value and data hold on large LCD display. It has low battery and consumption indicator along with auto shut off after 10 minutes of non use.
slide cabinet for keeping 75mm x 25mm glass slides in vertical position in plastic grooves individually. Cabinet frame of mdf with melamine lamination. Hinged door with lock is lined with velvet. Drawer frame of mdf/ abs plastic fitted with knob, index card holder and extra drawer in base with printed index sheets.
Metallographic specimen grinding & polishing machine Model RPMS-1B-MPT is equipped with single disc automatic Head and features step less speed changing grinding and polishing. The rotating speed of grinding and polishing disc is adjustable from 50 to 1000 rpm. Polishing and grinding head is designed according to investigation and researches on the market and customers' requirements. MPT can prepare one, two or three samples at one time. It is easy-to-use, and the quality of finished sample is high. It can realize the whole process of rough grinding, fine grinding, rough polishing and finishing polishing for specimen preparing. This machine features easy operation and economical applying. It is the ideal specimen preparing instrument for using in factories, scientific research institutes and laboratories of colleges.
Fiber Optic Illuminator (Double Light Guide) Model FI-2
Consisting of power supply unit having150W, halogenilluminator, transformer and blower system for working on 220/240V, AC supplied complete with imported flexible double fibre optic light guide having two condenser lens for providing simultaneously illumination from both the sides.
Adding in line of Aspirators, these polypropylene Carboys are autoclave, dependable & durrable. These are also equipped with a leak proof spigot screwed to the body. These carboys are an excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions. These carboys are available in following capacities: 10-20 L
A Set Consists of 23 Standard Samples Which Covers The Entire Range I.E.
Sample No. | Title | Sample No. | Title |
1. | Dead Mild Steel | 13. | Mottled Cast Iron |
2. | Low Carbon Steel | 14. | Ductile Cast Iron |
3. | Medium Carbon Steel (Annealing) | 15. | Cartridge Brass |
4. | Medium Carbon Steel (Normalizing) | 16. | Muntz Metal |
5. | Decarburised High Carbon Steel | 17. | Tin Bronze |
6. | Inclusion in Steel | 18. | Electroplated Component |
7. | Hardened Steel | 19. | Anodised Aluminium |
8. | Tempered Steel | 20. | Fusion Welded Mild Steel |
9. | Carburised Steel | 21. | Friction Welded Steel |
10. | Tool Steel | 22. | Powder Metallurgy Component |
11. | Grey Cast Iron | 23. | Deformed Mild Steel. |
12. | White Cast Iron |
Complete information including chemical composition, mechanical treatment, details of heat treatment, type of Etchant with description of Microstructure along with their coloured photographs are provided in a booklet. These sets are supplied in a wooden storing box with silica gel.
Abrasive Cut off machine is equipped with big cutting room and movable T shape work table. There for this machine has the ability of cutting rectangle and large specimens.Also the equipped separate type vice is very convenientfor operator to clamp various heterotypic work pieces.
Metallographic inlaying machine is is suitable for cutting general metallography and lithofacies material specimens. This machine features safety & reliable performance, low noise and easy operation. It is the ideal instrument for specimen preparing purpose used in colleges, laboratories and factories.
Details :
Camera Components :
Metallic Stand: Heavy Duty height Adjustable Stand, Gliding stage with 300X200 mm travel, with 3mm Threaded holes and Customized Slides to hold Specific Size PCB.
Ideal for various industrial inspection applications. These are designed for precision and comfort at the same time these are Ergonomic, Energy efficient and Economical.
Electronic Crack Measuring Device RCD-WDApplications :
Crack Intergrated detector is mainly used for crack width and crack depth measurement of bridges, tunnels, buildings, roads and so on.Main Features:
Professional Design
Standard probe and high grade probe.
Two detection methods : standards and simple depth measurement.
Standard ultrasonic transducer bracket, precise and adjustable; free from scene marking-out, which can greatly improve the detection efficiency.
Image automatic recognition and width intelligent computing technology; crack position without adjustment.
Crack automatic identification and calculation; real-time display; Human-computer interaction.
Friendly human-computer interactive interface
Various built-in various helpful files and demo video facilitate the users to conduct skilled instrument operation.
Mass Storage
4GB Large-capacity SD card can store more than 100, 000 data.
Automatic metallographic specimen mounting presses a kind of full automatic mounting press, equipped with in-out water cooling system. It is suitable for the heat mounting (thermohardening & thermoplastic) for all kinds of materials. After the parameters such as heating temperature, heat preserving time and applied force etc. are set up, put the specimen and mounting material into the machine, close the cover and press the start button, then the machine will finish the job automatically. It is not necessary for the operator to be on duty. According to different requirements of the material, there are four kinds of moulds that can be chosen to meet the demands at will. Also it is available to prepare two pieces of specimens at the same time, the capacity is doubled.
Designed for shaking kahn rack, bottles, flasks of different size by adjusting compartments. Body made out of thick mild steel finished with powder coating. Fitted with heavy duty PMDC motor on 220 V AC 50 Hz single phases. RPM range to about 250 stokes/min.Size of carrier Stokes/min:
31"x17"x4" 50-250
36"x18"x4" 50-250Optional:
Digital R.P.M. indicator
Ultra Low Deep Lab Freezer (-86 deg C) RSTI-124 SeriesDoubled walled with inner chamber made of S.S. and outer chamber made of PCRC sheet duly powder coated. Ultra Low temperature Refrigerant & two Compressors are used in refrigeration with high grade Puff Insulations. Temperature range from ambient to -86 DegreeC is achieved by hermetically sealed compressor. Body is mounted on a sturdy Angle iron frame with Castor wheels. Unit is fitted with Dual Display Microprocessor PID Digital Temperature Indicator cum controller for controlling temperature with great accuracy.
Vertical Model Horizontal chest type models are supplied in a single compartment where as vertical models are supplied with two or three SS trays. Workable on 220 V AC.These Deep Freezers are available in following sizes/capacities.Chamber Size Cap. (cu.ft.) Cap. (apr.)
455x410x610 mm 4 112L
505x415x830 mm 6.1 171L
565x565x865 mm 10 280L
650x580x900 mm 12 336L
illuminated mouth mirror with integrated suction pipe
x autoclavable LED SAFE T BRITE / MIRRORLITE wand
50 x Translucent 30° (#4) disposable mirror heads*
50 x disposable aspirator (suction) tubes
50 x hygienic disposable barrier sleeves
1 x Autoclavable suction pipe
100 x suction pipe connection strips
6 x battery set
The Disc Polishing Machines are extensively used for polishing the Metallography Samples for Microscopic observation to study various metal structures. Disc Polishing Machines are finely polished to ensure smooth, scratch free and mirror like appearance that enable accurate metallographic interpretation. Polishing is the final stage in producing a surface that is flat , smooth , scratch- free and mirror like in appearance. Such a surface is necessary for subsequent accurate metallographic interpretation, both qualitative & quantitative. In this Machine the drive is given the motor spindle, which is mounted on the motor shaft through friction mechanism. Polishing discs are fitted on the shaft and locked by nut. Shaft has two bearings, which are fitted into bearing holder for smooth working.
These surgical pathology work stations are useful for examining surgical specimens. The contaminated air & formalin vapours from work table is sucked out by built-in blowers. Provided with lighting system, swivelled-magnifier, SS Table, Sink & Hot & Cold Mixer Top, Metric Rulers-2 Nos. shelf, drawer and storage compartment , Towel Ring/Tissue Paper Stand and Waste Bin, Magnetic Tool Bar, Tea Stainer. The working area sides are made from door acrylic material. Widely used, as it is very convenient for "Grossing Work in Histopathology". Fume removal is quiet, efficient and measures less than 65 decibels. Wheel chair accessible design. Installation is quick and easy.
comfort galilean surgical and dental loupes-3.5x magnification with metal frame
these binocular flip-up loupes are designed for optimal ergonomic comfort, providing an extra wide field of view, with an extra deep focus range.
light weight maximum ease of use variety of working distances multi-coated precision lenses ultra light-weight fully adjustable
technical details
magnification 3.5x
working distance 30mm - 60mm
wide focus field up to 125mm
deep focus field up to 120mm
light weight as little as 42 grams
viewing angle 0 - 45 degree
pupil distance 46mm - 70mm
with out head light
included in the basic loupe set
black carrying case light-weight metal frame head strap micro-fiber cloth screwdriver calibration target and user guide
.
Auto scale function • FFT function • 25MHz100MHz Bandwidth •Up to 500MS/s real time sample rate •Max.6000 record length for each channel •Dual channels plus External trigger •20 auto measurements •8 inch color LCD display for large view •PC communication through the USB or RS232 port for real-time data transmission •Advanced trigger: Edge trigger, Video trigger and Alternate trigger • Add new function of Trigger Hold off
|
laminar air flow workstation (horizontal) complete s.sswitches microprocessor blower touch panel for blower, flourescent light & uv ligh.(uv light with timer) & motorized front door of toughen glass. pre filter 99.00% down to 5micron.
hepa filter iso 14644 class 5 (class 100) 99.97%-99.99% down to 0.3 micron. Mesh guard for protection of hepa filter. airflow frontward horizontal. noise level 60 decibel 5%. velocity 0.35-0.50m/sec. work table made up of stainless steel 304gr. cock for gas on work table. front door made of toughen glass. uv lamp 15/30w, make philips holland. illumination led lights for easy operation. pressure digital manometer 0-50mm range with filter failure alarm. power supply 230v 10v/50hz single phase a.c. cabinet made of 304gr. Stainless steel. electricals 15/5 amp socket with switch. heavy duty blower dynamically balanced with 0.25hp electric motor mounted on anti vibration pad 1440rpm motor. safety features voltage fluctuations protection. micro switches for uv & led lights. stand castor wheels for easy movability. front wheels lockable with brakes. model particular rh-58-19 size 60x60x60cm rh-58-20 size 90x60x60cm rh-58-21 size 120x60x60cm rh-58-22 size 180x60x60cm
Precision Balance & Industrial Precision Balance:
Capacity - 120g , 220g , 320g , 360g, 420g, 510g , 720g, 1000g , 2000g , 3000g , 3100g , 4100g , 6100g , 8100g.
Additional Information:
Payment Terms : T/T