Dehradun, Uttarakhand, India
Our Products
MAIN FEATURES :
Earthing is essential and important for the safety of human lives and equipment. It has become an everyday term and a very common practice in electrical construction and operation. Earthing is necessary to eliminate electrostatic/ dynamic discharge of electricity and to take care of sensitive equipment. Being the prime requirements it is the most neglected aspect in our housing, industrial and commercial electrical infrastructure.
Chemical earthing is considered to be the most effective solution for consistent and permanent earthing. They are maintenance free and have minimum fluctuations and are eco friendly. They are highly reliable for safety of human life and have more surface area of conduction.
Conventional Earthing
Uses of charcoal & salt.
GI pipe with funnel & hole.
More area of space required.
Require regular maintenance.
More fluctuation in OHMIC value.
Chemical Earthing
Eco friendly chemicals are used for longer life.
Double pipe with flat technology.
Less area of space required.
Maintenance free.
No fluctuation of current & OHMIC value.
Whether in the office, in industry or at home: data networks and infrastructures are becoming ever more important. OBOs modern cable routing systems mean that you are well prepared for the new requirements. The systems are not only user-friendly and efficient during installation, but also during the planning phase. Whichever installation you wish to create, OBOs cable routing systems give you an advantage.
The OBO WDK wall trunking system is made of lead-free, polyvinylchloride material as per EN 50085-2-1, ROHS complied and non flame propagating. The supply length is 2000 mm in various sizes like 110mm x 60 mm, 60mm x 60 mm, 40mm x 40mm suitable for wire - Power and Data / Voice routing along the wall. This trunking can be used to integrate modular switches and sockets of upto 32 Amp. The system base perforation allows installation even in difficult circumstances. The special locking contour of the WDK trunking cover guarantees a perfect seat. The appropriate accessories allow optically attractive routing of the WDK trunking in any mounting situation.
The trunking shall have all accessories like partition, Internal corner cover, External corner cover , T intersection cover, Flat Angle cover , cover clip etc for cable management.
1 channel
Daily program
with 200 hours Battery Backup
Shortest switching time: 15 minutes
Clock hands for time display and in addition
12/24 hour recognition
Simple summer/winter time correction
Time can be changed clockwise or anti-clockwise
DuoFix spring terminals
Switching preselection
Manual switch with 3 positions: Continuous
ON/AUTO/continuous OFF
Switching status display
1 channel
10 year Battery Backup (lithium battery)
DuoFix spring terminals
Text-oriented user guidance in display
Preset date and time
fully operable without mains connection
56 memory locations
Interface for OBELISK top2 memory card (PC programming)
Zero-cross switching for relay-saving switching and high lamp loads
ON-OFF switching times
Switching preselection
Permanent switching ON/OFF
Integrated operating hour counter
Reset option
Service function for monitoring
maintenance intervals
Holiday program
Display back light (can be turned off)
Permanent switching ON/OFF
PIN coding
Automatic summer/winter time changeover
Ingress protection: IP 66 Impact resistance: IK 10 Material: Fiberglass - reinforced polyester Size: 300x250x140mm to 1000x800x300mm Stop to corrosion Fire retardant Waterproof Double isolation Customizable end user friendly Internal door optional Double bar closing all kind of locks Triple lock system optional 180 degree door opening
Motion detector (PIR) Detection angle 360 3-16mtr detection area Automatic lighting control based on presence and brightness For out door use. Additional creep under protection. Sensor head can be turned 90 horizontally and by 45 downwards and by 90upwards. Adjustable brightness switching value and switch-off delay Zero cross over switching for relay-saving switching and high load lamps. Sensitivity can be reduced to limit detection area IP55 protection Mounting height 2.5mtr.
Our expertise lies in designing cable Routing and raceways as per customers requirement and providing these all over India and abroad. Cable Routing system comprising cable Routing and associated fittings forms a rigid structure used to securely fasten and support cables. These can be used both overhead and underground. Use of cable Routing makes maintenance and replacement of cables much easier and enhances the life of cables.
Types of Cable Routing:
We deal in both Ladder-Type cable Routing and Perforated Types cable Routing. Their perforations allow air circulation and drainage and also entry/exit points for small cables. Normally these are kept open at top. However, if required, we can also provide their cover for extra protection. Cable tray cover has no perforations.
Unlike to perforated and ladder type Routing, there are Solid Bottom Routing available. These are also called Cable Channels or Cable Troughs. However, these are not popular and seldom used.
Material Used :
Cable Routing are commonly made of galvanized steel, stainless steel cable Routing or aluminum sheets. On specific demand, we can also provide cable Routing made of glass-fiber reinforced plastic. Unlike metallic Routing, these are completely non-conductive and, therefore, do not need to be grounded. These Routing are fully chemical and corrosion resistant.
Thickness :
Depending on load of cables, the thickness of cable Routing may vary from 1 mm to 4 mm.
Finishing :
Pre-galvanized (recommended for indoor use)
Hot dip galvanized (recommended for indoor / outdoor use)
Painted (recommended for indoor use)
Powder coated (recommended for indoor use)
Epoxy coated (recommended for indoor / outdoor use)
Cable Routing Accessories :
We supply also clamping and supporting accessories like Clamp, Coupler Plate, Elbow. Bend, Junction Box, Tee and Reducer etc. that are used with cable Routing to provide a complete and functional tray system.
Advantages :
Our cable Routing are easy to assemble and strong.
These do not corrode and require hardly any maintenance.
These have high mechanical resistance, excellent chemical resistance and long long-lasting service life.
Use of cable Routing makes replacement of cables much easier and enhances their life.
Distribution board 2 - 12 way units Material: ABS (Acrylonitrile-Butadiene-Styrene) Dimension: 170X100X105mm to 217x307x105mm Degree of protection: IP65 Impact resistance: IK08 Shock-proof Dimensional stability: -25C+85C
Presence detector PIR Square detection area 360, up to 8x8mtr for reliable and easy planning. Master/slave functions up to 10 detectors to expand detection area. Choice of fully or semi-automatic operation Automatic lighting control based on presence and brightness Ceiling installation for suspended ceiling Zero cross-over switching for relay-saving switching and high lamp loads Push-button or switch options for manual switching Room monitoring with selective movement detection Self-learning time delay
