Radhey Rani Marketing Kanpur, Uttar Pradesh

We are reckoned as an eminent Oil Bound Distemper Manufacturer, Exporter and Supplier based in India. The Garware Eomite Washable Oil Bound Distemper is offered in paste form and is suitably used for protection and decoration of various surfaces. Suitable For :*Fully matured plasterwork surfaces*Concerete surfaces*Brickwork surfaces*Asbestos surfaces Salient Features :*Ease of application*Good wash ability*Eye soothing matt finish*Long lasting Application Methods :*Brush*Roller No. Of Coats Recommended :*Minimum 2 coats Thinner :*Clean water Thinning :*Add 1 liter of water to every 1.5 kg to 2 kg of Distemper Drying Time (At 27o2oC & RH 60 5%) :*Surface Dry : 30 minutes*Recoting : 6 to 8 hours Finish :*Smooth*Matt Packs Available :*20 kgs*10 kgs*5 kgs*1kg

Garware Impressive Interior Plastic Paint is a premium quality Architectural coating specially formulated by using pure acrylic latex, and high opacity micronised pigments, which has been in-corporated in Garware Impressive Interior Plastic Paint so as to impart smooth velvet finish, with excellent washability. Garware Impressive Interior Plastic Paint can be applied on the Interior surfaces, on new (with appropriate curing) and previously painted surfaces like plastered brick, work concrete and wooden surfaces with plaster primer. The surface we want to paint should be made free from dust, oil, grease, traces of old flakes, fungus etc. Apply suitable plaster primer prior to application of Garware Impressive Interior Plastic Paint. Salient Features : Excellent flow and washabilityVery good stain resistanceEase of applicationLow odour. Supply viscosity : Smooth and buttery Application methods : BrushingRoller application No. of coats recommended : Two coats minimum depending upon the nature of background surface Thinning : With Clean waterFinish coat: - Roller application 35-40% by volume Brush application 50% by volume. Drying Time : Surface dry:30 minutes. at 27 2C & RH 60 5%Hard dry:4 hours.Relative Humidity Covering Capacity : 20-22 square meters per coat per liter on a smooth non- absorbent surface Finish : SmoothSatin Colour Range : Brilliant WhiteBlazing WhiteSeveral other attractive shades shown in shade card Storage Life : Best for use within 12 months from the date of manufacture under normal storage condition Packs Available : 20 ltrs10 ltrs4 ltrs1 itr.

We are one of the eminent manufacturers & exporters of premium quality Wall Plaster. This Wall Plaster is a complete solution to prevent buildings from cracks, fungus and uneven finish. Our Wall Plaster is easy to apply and leaves a fine flat finish. Wall Plaster offered by us is water proof and sun proof as well. With extra range of advantages, our Wall Plaster has become one of the most demanded products of our entire range. The superior quality Wall Plaster offered by us is ideal for filling the dents and imperfections and leveling on primed wall. Salient features Even flat finish Crack Resistance Water Proof Sun Proof Fast Drying Anti fungal & Bacterial Anti Seal High Coverage Fast & easy application Fast air cure Decorative & Protective Advantages No need of instalment application Eco-friendly Eco-environmental Anti-pollution Economical Very good filling and cutting properties Typical application For filling the dents and imperfections Levelling on primed wall. Surfaces preparation Clean the surface thoroughly free from Loose particles, Dust, Moisture, Oil, Grease Application method Apply by using putty knife Number of coats recommended One or multiple coats depending on the nature and imperfections of the surface.

Garware Expressive Exterior Plastic Paint is premium water based, high performance, and long lasting exterior paint which is formulated to suit the extreme tropical conditions of high rainfall, humidity and heat. The product is based on 100% Acrylic resin and hence it forms a tough and flexible protective film. Garware Expressive Exterior Plastic Paint contains a unique combination of surface protections, which are released slowly over a long period of time.The surface to be painted must be free of all dust, grease, traces of paint flakes, etc. For the application of Garware Expressive Exterior Plastic Paint, surfaces previously coated with cement paint must be cleaned thoroughly with a stiff coir brush, to remove dust, dirt, chalking or any friable material. This ensures proper adhesion of the new paint system. Garware Antifungal Solutions attack is great treatment. All structural cracks must be filled with White Cement and leakages should be stopped, before actual painting. Garware Antifungal Solution can be applied by brush, roller or spray. When the surface is clean . However, for previously painted surfaces, two topcoats can be directly applied on properly prepared surfaces, without applying a Primer Coat. After the priming coats have dried (2-3 hrs), two final coats of Excel 100% can be applied after thinning the paint with 40% 50% volume of clean water. Salient Features :Excellent out-door durabilityVery good colour retentionFaster dryingSmooth & matt finishExcellent resistance to fungal and algae growthEasy to apply and maintainSuperior washability & scrub resistanceVery wide range of beautiful coloursVery good coverage thus good value for money. Recommended for :Exteriors and Interiors of housesArchitectural buildingsCommercial buildings Packs Available :1 ltr4 Ltrs10 Ltrs20 Ltrs

Garware Eomite Premium Water Based Wall Primer is formulated by using Copolymer Emulsion and ideal combination of pigments and extenders so as to ensure deep penetration and sealing of porous surfaces. It is pigmented white to give reasonable opacity to the primer. It is suitable for interior and exterior application for priming of plastered surfaces and other masonry works. It makes the surface less absorbent and increases the spreading capacity of the paint. Garware Eomite Cement Primer Water Based Primer can be applied on plastered surfaces, asbestos sheets, concrete, brickwork, etc. prior to over painting with water based paints. All surfaces before painting must be dry and must be free from loose dust, oil, grease, etc. In case of previously painted surface, remove the old loosely adhering paint by scraping and rubbing with sand paper. Dust off, in case of newly prepared plaster surface, allow sufficient time for curing and drying prior to Primer Application. Salient Features :Excellent adhesion to substrateVery good intercoat adhesionSeals dry porous surfacesGood hardnessEase of application. Application Methods :BrushingSprayingRolling No. of Coats Recommended :One coat is sufficient for normal substrates Thinning :With Clean WaterIf necessary 15-20% of water can be used for thinning Drying Time :Surface Dry:30 minutes at 27 2C & RH 60 5%:Overcoating:after 6 hours. Covering Capacity :14 16 sq. mtrs litre coat on smooth non absorbent surface. Finish :SmoothMatt Colour :WhiteCan be tinted by using Garware(If required)Hi- Power Universal Stainers Storage Life :Best for use within 12 months from the date of manufacture Packs Available :20 ltrs.10ltrs4 ltrs.1 ltr.