Racy Biotech

Kashmere Gate, Delhi

• Dressing Drum are used for Sterilizing and storing different types of dressings, instruments and surgical requisites.
• Slotted belt with clamp for loosening or tightening of belt to open or close the perforated on the body.

• Are fitted with backalite/good quality plastic handle & four legs.
• Are electrically fitted with 1KW. - 2KW, single phase element of 220V/50Hz. as per sizes & three core wire.
• Are available with thermostate to control temperature of water from size 12 onwards. (Kindly add T with regular code.)
• Are available with thermostate and tray lifting arrangement from size 12 onwards.
• Are available with auto cut off element for all sizes (Kindly add A with regular code.)

Description

• Tubular Head and Foot Bows of unequal height with vertical tube support.
• Framework Made-up of M.S. Tubes.
• Top made-up of Oval perforated CRCA M.S. Sheet.
• Legs Fitted with PVC Stumps.
• Four Location for I.V. Rod.
• Full length drop side rails on both sides.
• Finish: Pretreated & Epoxy Powder Coated.
• Overall Approx. Size: 1480l x 840w x 600h mm.
• Bed frame approx size : 1370l x 760w mm.
• Backrest Elevation.

Optionals

• Plain Matterss
• S.S. Telescopic I.V. Rod

• Overall Size: 180l x 60W x 46h cms.
• Framework Made-up of Rectangular / Square M.S. Tubes.
• 5cm foam padded fixed mattress covered with rexine.
• Legs Fitted with PVC Stumps.
• Finish: Pretreated & Epoxy Powder Coated.

• Four vertical M.S. tubes of 19mm.
• Two longitudinal & two transverse tubes of 15.8 mm .
• Knocked down condition.
• Pre-treated and epoxy powder coated.

• Overall Size : 16"l x 16"w x 32"h.
• CRCA sheet constructions. Having one Box and one drawer.
• Jointless S.S. Top with three Sides raise edges.
• Finish : Pretreated and Epoxy Powder coated

• Five Legs base mounted on 5 cms dia castors.
• With Two approx. 35 cms S.S. Basin.
• Vertical SS Tube made of 25mm x 18G.
• Basin Holder SS Tube made of 16mm x 18G.
• Finish : Stainless Steel Frame with Stainless Steel Basin.

• Rectangular frame work mounted on 5 cms castors.
• ABS top adjustable by Pneumatic gas spring.
• Finish : Pre-treated and Epoxy Powder Coated.

• Overall Size : 1680h x 2450l mm approx.
• M.S. Tubular frame work made of 19mm x 18G in Four Section.
• Legs made of 25mm x 18G mounted on 5 cms castors with hooks and spring along with curtains.
• Each Span 610mm wide.
• Finish : Pre-treated and Epoxy Powder Coated.

• Stainless Steel Body.
• Ring made of Aluminium Casting.
• Lid made of Aluminium Casting with S.S Plate.
• Available in Electric / Non Electric (Fuel Based).
• Used for Sterlization of Surgical Instruments and Dressing.
• Also available in Stainless Steel Lid as per customer requirement.
• Also available with lower water cut off devices.

Common Features :-

• Available in Electric / Non Electric (Fuel Based).
• Kindly add E for electric and NE for non electric with code.
• Electric Autoclave fitted with heating element of 2KW single phase 220 V / 50 Hz.
• Good quality rubber Gasket.
• Max Pressure 15 PSI.
• Equipped with Safety Pressure Release, Weight, Steam Release / Control Valve.
• Highly strong and durable Vaccum & Steam Release Valves.
• Weight type safety valve & Pressure Regulating Device for better safety and functioning.
• Well designed Epoxy coated outer stand.
• Also availbale in Semi Automatic (Timer Based)
• All sizes & capacity are approximate.

• Suction Apparatus trolley model cabinet is available in (0.25) Hp and (0.5) Hp is fixed with long pressure tubing, vacuum control automatic cover flow cut-off device mounted on good quality two rubber wheel & stainless steel top.
• Product available in (0.25) Hp fitted with two graduated 1.6 ltrs. glass jar with air tight synthetic rubber lid.
• Product available in (0.25) Hp is fitted with two graduated 2 ltrs. polycarbonate jar / glass jar with air tight synthetic rubber lid.
• Product available in mild steel epoxy coated body or complete stainless steel body.

• Vibration type variable speed genie short rapid electronic stroke motor drives .
• Neoprene cup in parts vigorous agitation to tube or small flask.
• Shaking starts when vessel is pressed against cup.
• Fitted with vacuum Rubber at the bottom to prevent walking.
• Outer casing made of MS / CRC sheet duly painted / powder coated.

Applications

• For Industrial Research, Bio Tech, Medical Labs etc.

`

• With safety switch
• Scope of supply Includes the rotor
• High Speed for short centrifugation time
• Small Footprint
• Simple to operate
• Step Speed adjustment
• Classical Metal Case
• Suit for qualitative analysis of blood serum and plasma in hospitals and blochemical laboratories.

For keeping Blocks embedded in embedding rings/disposable cassettes in numerical manner easy to check the serial numbers.
Available in following capacities

• 2000 blocks
• 5000 blocks
• 10000 blocks
• 20000 blocks

FLAT MANNER Slides Cabinet is made of thick Mild Steel. Duly powder coated. Each aluminum Tracy can accommodate : 20 Glass slides of 7525mm size in flat position, easily be carry or placed in Incubator each tray have a black colour nob to lift easily. The Cabinet has door for dust free storage & is provided with lock and key.

Available in following capacities

• Cap : 500 Slides / 25 Trays
• Cap : 1000 Slides / 50 Trays
• Cap : 2000 Slides / 100 Trays
• Cap : 2000 Slides / 100 Trays
• Cap : 3000 Slides / 150 Trays
• Cap : 4000 Slides / 200 Trays
• Cap : 5000 Slides / 250 Trays
• Cap : 10000 Slides / 500 Trays

for keeping Embedding Ring / Disposable Cassettes

• Rigid plastic construction provides a strong, robust structure.
• Each unit contains six drawers with smooth sliding action, even when full.
• Drawers contain mild steel divider tray, total capacity of 1000 blocks.
• Attractive storage system with lock, and key.
• Capacity :- 1000 Embedding Rings