Our Products
Welding Compounds
1 Products availableOur Complete range of products are Submerged Arc Welding Wire, Aluminum Welding Wire, Stainless Steel Welding Wire, FLUX CORED ARC WELDING WIRE and Copper Coated Welding Wire.
classification :aws/sfa-5.10 er4043, iso 18273, s ai4043
classification:aws/sfa-5.10 er4043, iso 18273, s ai4043is-814: er 4222 x, din 1913 e 4322r3
characteristics:er 4043 is a general-purpose type aluminum welding wire. It is one of the oldest and most widely used welding and brazing alloys. This aluminum alloys contains silicon additives, which result in improved fluidity (wetting action) of the weld pool and also produces a weld less sensitive to cracking. Its bright weld finish makes it a popular choice of welders. Er 4043 can be used to weld various grades of aluminum.
application:for welding 6xxx alloys and most casting alloys automotive components such as frame and drive shafts bicycle frames
Al | Si | Fe | Cu | Mn | Mg | Zn | Ti |
Bal | 4.5-6.0 | max0.6 | max0.03 | max0.05 | max0.05 | max0.1 | max 0.2 |
Shielding GAS |
Condition | Yield strength N/mm2 |
Tensile strength N/mm2 |
Elongation % |
|
TYPICAL VALUE | 100%Ar | AW | 20-40 | 120-165 | 3-18 |
DIA MM |
PACKING TYPE PLASTIC SPOOL |
WEIGHT/SPOOL | |||||||||||||||||||||
|
|
|
Size (mm) | Size (inch) | Length (mm) |
Length (Inch) |
Tube Packing 5 LBS |
Box Packing20 LBS |
1.60 | 1/ 16" | 1000 | 36" | ✔ | ✔ |
2.0 | 5/ 64" | 1000 | 36" | ✔ | ✔ |
2.4/ 2.5 | 3/ 32" | 1000 | 36" | ✔ | ✔ |
3.2 | 1/ 8" | 1000 | 36" | ✔ | ✔ |
stainless steel welding wire (tig / mig / saw)a basic coated 3.50% ni alloyed electrode for welding low alloy steels.
classification : aws/sfa 5.5 e 8016-c2
characteristics :
a basic coated hydrogen controlled electrode depositing weld metal which contain 3.0-3.5 % nickel. The electrodes have smooth and stable arc characteristic with easy slag removal system. The other features are excellent striking and good bead appearance. The weld metal is of radiographic quality. This type of electrodes to be used for low temperature service.
application :
specially designed for welding fine grained steels and nickel steels for service temperatures down to minus 80c. Other application include pressure vessels & storage tanks etc.
re-dry condition :re-dry the electrode at 300c for 1 hrs before use.
ALL WELD CHEMICAL COMPOSITION %
C |
Mn |
Si |
Ni |
S |
P |
0.12 |
1.25 |
0.60 |
3.00-3.75 |
0.030 |
0.030 |
(Single value maximum)
ALL WELD MECHANICAL PROPERTIES:
YS (N/mm2) |
UTS (N/mm2) |
Elongation % |
CHARPY “V” NOTCH IMPACT AT |
460 min. |
550 min. |
19 min. |
-750C : 27 J min. |
(PWHT 605⁰+15⁰C for 1 Hrs.)
DIEMENSION, CURRENT CONDITION & PACKING DATA:
Size (mm) (Dia) |
Size (inch) (Dia) |
Current Condition (DC+/AC 70V) |
No. of Pcs./pkt. |
No. of Pcs./Case |
2.50/2.40 |
3/32” |
70-100 |
170 |
640 |
3.15/3.20 |
1/8” |
100-130 |
110 |
440 |
4.00 |
5/32” |
150-180 |
70 |
280 |
5.00 |
3/16” |
190-230 |
48 |
192 |
we are offering best flux cored arc welding wire supplier company.
classification :aws/sfa-5.11: enicu 7
characteristics :a medium heavy coated, low hydrogen basic coated, monel electrode. Electrode has extensive corrosion resistance properties due to minimum iron content in the weld deposit. The joints are radiographically sound
application :1) suitable to weld monel metals to itself.2) monel to carbon steel or stainless steel.3) welding on clad side or monel clad steel.4) seawater corrosion resistance applications, petrochemical, daily beverage industries, chemical industries etc.
re-dry condition :re-dry the electrode at 250c for 1 hour before use.
C | Mn | Si | Ni | Al | Ti | Fe | Cu |
0.15 max. | 4.00 Max | 1.50 max | 62.00-69.00 | Al 0.75 Max. | 2.00 Max | 2.50 Max | Bal. |
UTS N/mm² |
EL % (l=4d) |
480 Min. | 30 Min |
Size(mm) (Dia) | Size(inch) (Dia) | Current Condition (DC+)Amps | Wt. of /pkt. | Wt. of Case |
2.50/ 2.40 X 350 | 3/ 32” X 14” | 80-100 | 2 | 20 |
3.15/ 3.20 X 350 | 1/ 8” X 14” | 100-130 | 2 | 20 |
4.00 X 350 | 5/ 32” X 14” | 140-180 | 2 | 20 |
5.00 X 350 | 3/ 16” X 14” | 170-200 | 2 | 20 |
copper coated welding wire (tig / mig / saw)
hydrogen controlled, basic coated electrode for non-machinable weld on cast iron
classification :aws/sfa-5.15: est
characteristics :a hydrogen controlled, medium heavy coated electrode, laying non- machinable weld deposits on cast iron. The electrode needs the components to be pre-heated in case they are heavy and complicated sections. Gives strong and rigid weld joints.
application :1) suitable to weld mild steel to cast iron parts.2) repair works on cast iron where machining is not of importance and primary consideration
re-dry condition :re-dry the electrode at 150c for 1 hour.
welding precaution :1. Clean the weld area free of any surface contaminations.2. For heavy and complicated sections, preheat to minimum temperature of 400 is recommended.
C | Mn | Si |
2.00-3.00 Max | 0.60 Max | 4.00-6.00 max |
Size(mm) (Dia) | Size(inch) (Dia) | Current Condition (DC+/AC) Amps | Wt.of ./pkt. | Wt.of ./Case |
2.50/ 2.40 X 350 | 3/ 32” X 14” | 60-80 | 5 | 20 |
3.15/ 3.20 X 350 | 1/ 8” X 14” | 80-110 | 5 | 20 |
4.00 X 350 | 5/ 32” X 14” | 110-130 | 5 | 20 |
5.00 X 350 | 3/ 16” X 14” | 140-180 | 5 | 20 |
A well known submerged arc welding wire supplier company.
CLASSIFICATION : AWS/SFA-5.18 ER70S-7
CHARACTERISTICS :Copper coated double oxidized solid wireforall position CO2 welding. The special Characteristics are smooth and stable arc low spatterThin and uniform copper coatingensure good conductivity usedull for high speed feeding
APPLICATION:Suitable for welding structural steels up to UTS 500 N/mm2and Carbon steel and low alloy steels for single and malti pass with higher travel speeds compared to others filler metals.
SHIELDING GAS :Welding with CO2gas and Ar+ CO2 gas mixture
C | Mn | Si | S | P | Cu |
0.070-0.15 | 1.50-2.00 | 0.50-0.80 | 0.035 Max | 0.025 Max | 0.50 Max |
YS (N/mm²) |
UTS (N/mm²) |
EL % | CHARPY “V” NOTCH IMPACT AT |
420-480. | 510-610 | 22-32 | Minus 20°C : 70-90 J Minus 30°C : 40-60 J |
Size(mm) | Size(inch) | Current Condition (DC+) | Voltage (V) | Gas Flow Rate L/min. | Spool packing 12.5 kg. | Spool packing 15 kg | Drum packing 100/200kg |
0.60 | 0.023 | 40-100 | 16-20 | 10-15 | X | ||
0.80 | 0.031 | 60-180 | 16-24 | 10-20 | X | ||
0.90 | 0.035 | 60-180 | 16-28 | 10-20 | X | ||
1.00 | 0.039 | 80-220 | 18-28 | 10-25 | X | ||
1.20 | 0.047 | 120-300 | 24-34 | 15-25 | |||
1.60 | 0.062 | 150-350 | 24-36 | 15-30 |
Size(mm) | Size(inch) | Length (mm) |
Length (inch) | Current Condition (DC+) | Voltage (V) |
Tube packing 5 kg | Box packing 20 kg |
1.60 | 1/ 16” | 1000 | 36” | 80-110 | 10-16 | ||
2.0 | 5/ 64” | 1000 | 36” | 100-150 | 12-18 | ||
2.4/ 2.5 | 3/ 32” | 1000 | 36” | 130-180 | 14-20 | ||
3.2 | 1/ 8” | 1000 | 36” | 150-220 | 16-24 | ||
4.0 | 5/ 32” | 1000 | 36” | 200-280 | 18-28 |
CLASSIFICATION: AWS/SFA-5.10 ER5356, ISO 18273 S AI5356
CLASSIFICATION:AWS/SFA-5.10 ER5356, ISO 18273 S AI5356IS-814: ER 4222 X, DIN 1913 E 4322R3
CHARACTERISTICS:ER 5356 is a general-purpose type aluminum alloys which is typically chosen for its relatively high shear strength. In addition, it also offers excellent corrosion resistance when exposed to salt water. ER 5356 should be considered for welding 5000 series aluminum base metals
APPLICATION:Suitable for welding selected grade of wrought Al/Mg alloys including 5083, 5056 and 5456
Al | Si | Fe | Cu | Mn | Mg | Zn | Ti |
Bal | 0.25 max | max0.4 | max0.10 | 0.05 to 0.20 | 4.5 to 5.5 | max0.1 | 0.06 to 0.20 |
Shielding GAS |
Condition | Yield strength N/mm2 |
Tensile strength N/mm2 |
Elongation % |
|
TYPICAL VALUE | 100%Ar | AW | 130 Average | 262 Average | 3-18 |
DIA MM |
PACKING TYPE PLASTIC SPOOL |
WEIGHT/SPOOL | |||||||||||||||||||||
|
|
|
Size (mm) | Size (inch) | Length (mm) |
Length (Inch) |
Tube Packing 5 LBS |
Box Packing20 LBS |
1.60 | 1/ 16" | 1000 | 36" | ✔ | ✔ |
2.0 | 5/ 64" | 1000 | 36" | ✔ | ✔ |
2.4/ 2.5 | 3/ 32" | 1000 | 36" | ✔ | ✔ |
3.2 | 1/ 8" | 1000 | 36" | ✔ | ✔ |