R. K. Transmission

Peenya, Bangalore, Karnataka

We are completely committed to deliver high quality spur gears to our customer expectations. Spur gears are the simplest and the most common type of gears. These gears having involute teeth cut on a cylindrical surface that transmits rotary motion between two parallel shafts. These Gears in mesh are capable of transmitting power and uniform rotary motion from one gear to another. The gear transmitting the power or motion is called the driver gear and the gear connected to the drive gear is called the driven gear and these gears must be the same diametral pitch and pressure angle. Spur gear provide a positive, constant speed drive, the speed depends on the number of teeth in the driving gear. Spur gears are suitable for wide range of products like construction equipments, agriculture equipments, machine tools, marine hoists, conveyors, indexing equipments and multi-spindle drives. These gears are available in different materials like alloy steel, cast iron, bronze, aluminum, plastic and phenolic. With our experience we offer high quality gears that exceed our customers expectations and we work closely with our customers to minimise their cost and on-time delivery. We manufacture spur gear in various sizes, from minimum of 10 mm outside diameter to maximum of 750 mm outside diameter and a length up to 400 mm. Module measurement of 0.5 module to 12 module. These spur gears are made as per the customer requirements.

Helical gear is a cylindrical gear wheel having the tooth form generated on a helical path about the axis of the wheel. While meshing these angled teeth creates a thrust load on the gears, the teeth of the helical gear are curved along the helical path and these gear engages more gradually than the spur gear. It provides a stronger, smoother and quieter operation because of its successive teeth coming in to action and it transfers load uniform and gradual. These types of gear need a pair of gears that is right-hand with one left-hand helical gear. The important measurements that should be considered while selecting helical gears are number of teeth, pitch diameter, outside diameter, center distance are all factors in its performance and effectiveness. There are different types of helical gears such as cross helical gear, double helical gear and herringbone gears. Material used for helical gear ranges from all types of steel, stainless, cast iron, bronze, plastic, phenolic, etc. Helical gears are used in various industries, like the power industry, mining industry, steel industry, rubber industry, textile industry, automotive industry, earth moving industry, packaging machinery, machine tools and many more. We are committed to provide customers with high quality gears and best service needed to create and sustain in gear manufacturing system. We manufacture helical gear in various sizes, from minimum of 10 mm outside diameter to maximum of 750 mm outside diameter and a length up to 400 mm. Module measurement of 0.5 module to 12 module. These helical gears are made as per the customer requirements.

We are engaged in manufacturing and supplying high performance sprockets. These are cylindrical shaped with teeth around the circumference at either end projects through Perforations whose teeth engage the links of a chain. There are different types of sprockets like simplex, duplex, triplex and quadruple body with plain bore or taper lock bore depending upon the applications and service requirements. We manufacture sprockets in various sizes, from minimum of 10 mm outside diameter to maximum of 750 mm outside diameter and a length up to 400 mm. These sprockets are made as per the customer requirements. Sprocket are used in many power transmission drive system, here a sprocket and a chain are needed to transmit rotary motion over a distance and the main advantages in this drive systems are center distance much less restricted, greater efficiency, higher drive ratio at short center distance, transmits power more smoothly, significantly higher speeds and power capacity, effective in oil filled gear boxes, less vibration, larger ratio possible, with stand heavier overloads and relatively inexpensive. Sprockets are used in various industries like automobile industry, glass and plastic industries, petro chemicals, textile machinery, food plants, farm equipments, building construction equipments, film and conveyor chain transmit system. The materials used to manufacture sprockets are alloy-steel, steel, cast-iron, bronze, aluminum and plastic, acetal and nylon. With our commitment to Quality, timely delivery and customer satisfaction. Our work process are focused on meeting their requirements and creating value by enhancing their operational excellence.

A worm consisting of a threaded shaft that mates with a worm wheel so that the rotary motion can be transferred at right angle to each other. Because of the high ratios possible with worm gearing maximum speed reduction can be accomplished in less space than many other types of gears. Efficiency of the worm gear drives depends to a large extent on the helix angle of the worm. Number of starts of the worm gears and higher helix angle proves more efficient than single thread worm gears. Worm gear sets are either left or right hand threads and are with single, double, triple and quadruple thread starts. When properly applied, worms and worm gears provide the smoothest and quietest form of gearing. Proper lubrication enhances efficiency by reducing friction and heat. Worm and worm gears are used in various industries like power transmission, automobiles, textile machines, presses, conveyors, ship propeller drives, machine tools and many other industries. Materials used for worm is hardened steel, carbon steel, cast-iron, Bronze, acetal and nylon where as for worm gears materials used are Cast-iron, bronze, acetal and nylon however depending on the application. With our experience we offer fine quality of gears and enhancing our business excellence to deliver more value to our customers.

We offer a comprehensive range of premium quality rack and pinions. A rack and pinion gears system is composed of two gears consists of a round gear is the pinion, that meshes with a flat-toothed gear is the rack, these gears system is to convert rotary motion in to linear motion or from linear to rotary. Rack and pinions come in a variety of quality, configurations and performance levels, ranging from basic straight tooth type called spur gear, configurations to highly sophisticate helical and roller configurations with a long list of performance enhancing features such as precision tolerance, precision ground mounting surfaces, surface treatment, wear-resistant, auto lubrication and so on. Rack and pinion performance factors are in large measure related to manufacturing quality such as backlash, pitch deviation and tooth finish. Materials used for rack and pinion are mild steel, stainless steel, alloy steel, carbon steel, bronze, aluminum and plastic. These drive system are perfect for a wide range of applications, such as machine tools, pick and place robots, automotive, aerospace, heavy machinery, waste-water treatment plants, material handling systems, scale for displaying weight, mining drills and cable laying equipments. We are highly responsive to customers where ever they are. Our work processes are focused on meeting their requirements and creating value by enhancing their operational excellence.

R.K.TRANSMISSION is completely committed to delivering high Quality ground gears that exceeds our customer expectations. Gear grinding is a specific gear creation technique, the more perfectly ground in terms of dimensional accuracy and the surface finish of the tooth flanks, the better is the form fit and the more smoothly and quietly the gear box runs. These types of gear assure high transmission accuracy and deliver superior efficiency, greater load carrying capacity, minimum residual stress and high durability. Ground gears are used in various industries like printing machine, textile machine, sponge iron plants, sugar mills, geared motor, geared oil pump, machine tools and many more applications. Materials used for ground gears such as Alloy steel, carbon steel or any other materials as per customer specifications. With our experience we offer fine quality of gears and enhancing our business excellence to deliver more value to our customers.

An internal gear is the one with the teeth formed on the inner surface of a cylinder or cone, with teeth that are parallel to the axis of rotation. It provides a compact parallel shaft transmission drive with large speed reduction, used with a stock spur pinion the ratio is the same as the two external gears. Internal gear can be cut as either spur or helical, it can provide high ratios and smooth running. Internal gears are designed to transmit motion and power between parallel shafts rotates in the same direction. The advantages of the internal gears are reduced sliding action, which leads to less friction, less tooth wear and the slippage of the teeth is less. Internal gear are used in some of the industries like automobiles, sugar mills, textile plants, material handling equipments, paper mills, thermal power stations. Some of the materials used are alloy steel, carbon steel, bronze and plastic. We completely committed to deliver high quality internal gears that exceed our customers expectations and maximize economic value to our customer.