R. K. Scientific Instrument Private Limited

Nangloi, Delhi

Our Tissue Floatation Water Bath conquers all the worries by making the process of tissue preparation easier, efficient, and safer. We are enlisted with the preeminent Manufacturers and Suppliers of Tissue Floatation Water Bath in Delhi. This instrument that we offer is chemical resistant. Besides, it is fully automated, engineered to provide reliable results throughout its span. And the best thing about our Tissue Floatation Water Bath is that it is appreciated for preparing wrinkle-free and distortion-less tissue specimen.

Technical Details :

• Round, double-walled, single-piece inner and outer chambers, which are made of aluminum
• Inside surface finished in anodized black and outer surface finished in parrot green stoved enamel, with wide enough rim for drying the wet slides
• Chamber size : 225 diameter x 70 depth x 40 rim
• Temperature is controlled by EGO/JUMO
• German make capillary-type thermostat, form ambient to 70^oc with accuracy of 2^oc
• Supplied complete with pilot light and cord
• Suitable to work on 220V, single phase, 50HZ, AC supply

Our Automatic Tissue Processor is specially fabricated to fixate, dehydrate, and infiltrate tissue samples with solvents, alcohol, and paraffin wax. This Processor of ours stands high on inventiveness and functional aspect. This means that, from its design to its technology, we execute everything by giving painstaking attention to the details. And we engineer this Tissue Processor in compliance to international standards of quality. We are often called as the reliable Manufacturer and Supplier of Automatic Tissue Processor in Delhi.  

Technical Details :

• Progresses from its neutral stage, through dehydration stages to its final embedding in wax with 12 processing stage
• Quite elaborate methods can easily be employed for preparing tissues for histology
• The last two stages are thermostatically controlled wax baths
• Programming the machine is very simple by cutting notches at desired timing intervals on the disc calibrated for 24 hrs.
• If used with single load head, 43 tissues can be processed for unequal immersion time and with double load head 86 tissues can be processed using the equal, immersion time
• The delay timer for 24 hours is also provided for weekend and routine delay starting
• Both the baskets keep rotating to ensure better penetration
• All the beakers remain covered throughout evaporation
• On completion of the cycle the unit automatically gets locked up to prevent double processing and the tissues remain embedded in the wax bath, until removed

 

Safety Device : The built-in safety device protects the tissues by not allowing them to shift from 10th to 11th or 11th to 12th stage in case the wax is not melted. It precludes any accident due to power failure of malfunctioning of the wax baths

Accessories : The equipment is supplied complete with 2 S.S. Basket Rotors, 2 S.S. Baskets, 6 S.S. Tissue capsules, 10 Borosil Glass Beakers without lip, 2 S.S. Wax Baths, 5 numbers of 24 hrs. calibrated metallic timing disc, one notch cutting plier. Suitable to work on 220 V, single phase, 50 Hz, AC supply.

Cassettes keep specimen safely submerged in liquid. Efficient flow-through slots. Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35^o angle.

Detail

• Tissue Processing / Embedding Cassette with Cover made of acetal polymer
• Outside dimensions : 28 x 34mm
• Inside dimensions : 26 x 30 x 5mm

Metal Process Cover

• Stainless Steel lid for use in place of the plastic lid  Cassettes.
• Size : 28mm width (1.1"), 33.5mm length (1)

Tissue CassettesR.K.Tissue Processing / Embedding Cassette with Cover Cassettes keep specimen safely submerged in liquid. Efficient flow-through slots. Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35° angle

If precision sectioning is the criteria to judge a microtome, then our Rotary Microtome is the best deal. We are one of the eminent Manufacturers and Suppliers of Rotary Microtome in Delhi. These Machines, we offer, display a user-friendly interface. They are ergonomically fabricated, providing an ergonomic hand-rest, whereby adding a lot of convenience at the user’s end. And quality, we surpass this parameter too.

Features :

• Mechanical high-precision specimen feed
• Backlash-free micrometer feed system in dust-proof housing
• Patented mass-balanced system to compensate gravitational forces
• Smoothly running handwheel with quick locking system
• Specimen retraction can be disengaged
• Totally enclosed housing
• Easy to service
• Low-maintenance microtome with cross roller bearings for vertical and horizontal specimen movement
• Quick release clamping system
• Simple changing of specimens
• Mechanical trimming function; at two steps (10 μm and 30 μm)
• Specimen orientation with anti-tilt feature
• Knife holder base with lateral displacement feature

 

Instrument Technical Specification :

• Minimum Setting Value : 0.5 μm
• Trimming Thickness Setting Range : 1-60 μm
• Section Thickness Setting Range : 0.5-60 μm
• Setting Value : 0.5 μm Increment Step 0.5 μm, 2-20 μm
• Increment Step 1 μm & 20-60 μm Increment Step 5 μm

For an error-proof and fatigue-resistant performance, rely on our Tissue Embedding Stations! We are one of the most sought-after Manufacturers and Suppliers of Tissue Embedding Station in Delhi. The Station that we offer is fabricated using premium components, in line with the international standards of quality. And, it displays a user-friendly interface. As far as results are concerned, they are truly dependable. Buy high-quality Tissue Embedding Stations at modest prices from us!

Technical Details :

• Consists of three modules : Main Console, Cryo Console and Thermal Console that can be positioned either left-to-right or right-to-left workflow, depending on the preference of the operator
• The ergonomic large working surface allows processing of many samples at the same time
• Whole machine is made of steel
• Temperatures are controlled By Temperature Controllers and regulated
• Independent 2 temperature control systems (6 systems are adjustable 30^oC-80^oC)
• The tissue embedding cassettes and base molds trays are removable and can be set at
• The setting knobs allow adjusting the precise paraffin flow
• Paraffin tank Capacity : 5 Liter

Note : Paraffin has an additional timer for automatically on / off, at any time and everyday

The ergonomic large Working surface allows processing many samples at same time. Whole machine is made of Ms Steel temperature of molds and cassettes warming platform Temperatures are controlled By Temperature Controllers and regulated, Independent 2 temperature control systems (6 systems are adjustable 30C-80C) The tissue embedding cassettes and base molds trays are removable and can be set at, The setting knobs allow to adjust the precise paraffin flow. paraffin tank Capacity 5 Liter Note:- In paraffin has a additional timer for automatically on off at any time and any day this is a new feature in paraffin dispenser

We are counted amongst the well-known Manufacturer and Supplier of class apart Laminar Air Flow. Made from superior grade raw materials, our R.K. Laminar Air Flow Horizontal is appreciated for its durability, optimum strength and longer operational life. Laminar Air Flow Cabinets that we offer provides 100 air flow in the work area for operations where product is of greatest importance. Moreover, the unrestricted open front work area allows use of equipment under biologically clean conditions.

 

Application: The Laminar Air Flow Cabinet is designed to provide a high degree of protection for process products In laboratories and production facilities. Many critical applications in the medical, pharmaceutical, nuclear-power, and micro electronic fields demand an ultra-clean work environment which is free from biological and particulate contamination.

Operation: Ambient Air is draw in through pre-filter and is introduced in the work zone through the HEPA filter. The average velocity in the work zone is maintained between 0.4 and 0.5 m/s. Air cleanliness in the work zone is better than class 3.5 (100) in accordance with US FED STD 209 E

Construction: The cabinets are fabricated out of thick board duly sunmica clad or mild steel cabinet duly epoxy coated. The work table is made of thick board which is sunmica clad at top or S. S Table top will be provided as optional accessories.

All joints are sealed with silastic sealant. Side panels are provided of thick transparent acrylic sheets. The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.997% with hot, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger.

Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced. Blowersare mounted on vibration isolation mounts to minimize vibration. The working is illuminated by fluorescentlightings fitted to the unit. Height of the working table provides comfortable "Sit Down" working positionfor the operation to work on 220/230 volts AC. supply.

Optional :

• S. S Table Top
• U. V Lights attachment
• Front Acrylic Door
• Gas/ Vacuum Cock
• Castor wheels at the Bottom