Our Products
Medical Accessories
2 Products availableTachometers
1 Products availableSecurity, Metal & Leak Detectors
1 Products availableLeading Manufacturer, Supplier & Retailer of Vibration Meter VM-6370, Vibration Meter VM-6380, Vibration Meter VM-6380-2, Vibration Meter VM-6380-3 and Whiteness Meter WM-106.
Vibration Meter VM-6370
1.Spec:Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
2.Features:
* Can display the parameters of Displacement, Velocity and Acceleration simultaneously.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Sensor:Piezoelectric Transducer
Measuring Range:Acceleration:0.1400m/s 0.31312ft/s 0.040g Equivalent Peak
Velocity:0.01400mm/s 0.00416.0inch/sTrue RMS
Displacement:0.0014.0 mm 0.04160.0 mil Equivalent Peak-peak
Frequency Range:Acceleration:10Hz10kHz
Velocity:10Hz1kHz
Displacement:10Hz1kHz
Accuracy:5% of Reading+2 digits
Operating Conditions:Temperature050C
Humidity
Additional Information:
Payment Terms : T/T,
Vibration Meter VM-6380
1.Spec:Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
2.Features:
* 3 same parameters in one display for 3 dimensional measurement or 1 dimensional measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Sensor:Piezoelectric Transducer
Measuring Range:Acceleration:0.1400m/s 0.31312ft/s 0.040g Equivalent Peak
Velocity:0.01400mm/s 0.00416.0inch/sTrue RMS
Displacement:0.0014.0 mm 0.04160.0 mil Equivalent Peak-peak
Frequency Range:Acceleration:10Hz10kHz
Velocity:10Hz1kHz
Displacement:10Hz1kHz
Accuracy:5% of Reading+2 digits
Operating Conditions:Temperature:050C
Humidity:
Additional Information:
Payment Terms : T/T,
Vibration Meter VM-6380-2
1.Spec:Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
2.Features:
* 2 same parameters in one display for 2 position measurement or 1 position measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Sensor:2 Piezoelectric Transducers
Measuring Range:Acceleration:0.1400m/s 0.31312ft/s 0.040g Equivalent Peak;
Velocity:0.01400mm/s 0.00416.0inch/sTrue RMS;
Displacement:0.0014.0 mm 0.04160.0 mil Equivalent Peak-peak
Frequency Range:Acceleration:10Hz10kHz;
Velocity:10Hz1kHz;
Displacement:10Hz1kHz
Accuracy:5% of Reading+2 digits
Operating Conditions:Temperature:050C;Humidity:
Additional Information:
Payment Terms : T/T,
Vibration Meter VM-6380-3
1.Spec:Used for measuring periodic motion, to check the imbalance and deflecting of moving machinery.
2.Features:
* 3 same parameters in one display for 3 position measurement or 1 position measurement specified, showing 3 different parameters of velocity, acceleration and displacement in 1 display.
* In accordance with ISO 2954, used for periodic measurements, to detect out-of-balance, misalignment and other mechanical faults in rotating machines.
* Specially designed for easy on site vibration measurement of all rotating machinery for quality control, commissioning, and predictive maintenance purposes.
* Individual high quality ccelerometer for accurate and repeatable measurements.
* Wide frequency range (10Hz10kHz) in acceleration mode.
* Optional headphones for use as electronic stethoscope.
* Bearing condition monitoring function.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Sensor:3 Piezoelectric Transducers
Measuring Range:Acceleration:0.1400m/s 0.31312ft/s 0.040g Equivalent Peak;
Velocity:0.01400mm/s 0.00416.0inch/sTrue RMS;
Displacement:0.0014.0 mm 0.04160.0 mil Equivalent Peak-peak
Frequency Range:Acceleration:10Hz10kHz;
Velocity:10Hz1kHz;
Displacement:10Hz1kHz
Accuracy:5% of Reading+2 digits
Operating Conditions:Temperature:050C;Humidity:
Additional Information:
Payment Terms : T/T
Whiteness Meter WM-106
1.Spec:
Whiteness Meter is mainly used to directly measure the whiteness value of object or powder with flat surface. Can be widely used in whiteness measurement of textile printing and dyeing, paint, chemica.
2.Features:
* It consists of Light Source, Optical System, Detection System, Data Process and Display System. The whiteness Calculation Formula of the instrument is blue light whiteness R457.
* Use of high quality imported components, good reliability.
* The optical path design is reasonable, simple. Adopt filter system with correction, the whiteness can be reflected quantitatively.
* No preheating after starting, measurements can be taken after simple calibration, easy to operate.
* Pass strict inspection and testing, the instrument conforms to the JJG 512-2002 Whiteness Meter Verification Regulation. Also conforms to GB3978, GB3979, GB7973, GB7974, ISO2470, GB8904.2, QB1840, GB2913, GB13025.2, GB1543, ISO2471, GB10339, GB5950, GB12911, GB2409 and other standards.
* Able to memory 254 groups of measurement data.
* Use USB data out put and RS- 232 data out put to connect with PC.
* Provide Bluetooth data out put choice.
3.Specifications:
Range:0120
Resolution:0.1
Illumination Condition:45/0
Illuminant:LED 457nm
Whiteness Formula:Blue Light Whiteness WB=R457
Measuring Aperture:
Additional Information:
Payment Terms :
Ultrasonic Thickness Meter TM-1240
1.Spec:
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing.
2.Features:
* Using the latest high performance and low power consumption microprocessor technology.
* Automatic memory material code and sound velocity value, convenient to use.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Display:LCD
Operating Principle:Ultrasonic
Measuring Range:0.75400mm(45#steel)(Depend on Probe)
Resolution:0.1mm/0.01mm/0.001inch
Accuracy:(0.5%n+0.1)
Lower Limit of Pipes:15x2.0mm 20x3.0 mm(Determined By Transducer)
Sound Velocity:10009999 m/s
Operating Conditions:Temperature:040C;Humidity:
Additional Information:
Payment Terms :
Ultrasonic Thickness Meter TM-8812
1.Spec:
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing.
2.Features:
* Wide Measuring Range and high resolution. With high power emission and broad band receiving sensitivity, the gauge can match probes of different frequencies. That makes it easy to measure the rough surface, even cast iron. It is widely used in almost all kinds of industries.
* Applicable to measure the thickness of many materials, e. g. Steel, Cast iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron.
* Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement & fast measuring time.
* Using the latest high performance and low power consumption microprocessor technology.
* Automatic memory material code and sound velocity value, convenient to use.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Display:LCD
Sensor:Ultrasonic Probe
Measuring Range:1.2200mm/0.058 inch
Resolution:0.1mm
Accuracy:(0.5%n+0.1)
Sound Velocity:10009, 000 m/s
Lower Limit of Pipes:15x2.0mm20x3.0(Determined By Transducer)
Operating Conditions:Temperature:040C;Humidity:
Additional Information:
Payment Terms :
Ultrasonic Thickness Meter TM-8816
1.Spec:
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing.
2.Features:
* Wide Measuring Range and high resolution. With high power emission and broad band receiving sensitivity, the gauge can match probes of different frequencies. That makes it easy to measure the rough surface, even cast iron. It is widely used in almost all kinds of industries.
* Applicable to measure the thickness of many materials, e. g. Steel, Cast iron, Aluminum, Red copper, Brass, Zinc, Quartz glass, Polyethylene, PVC, Gray cast iron, Nodular cast iron.
* Used the exclusive Micro-computer LSI circuit and crystal time base to offer high accuracy measurement & fast measuring time.
* Using the latest high performance and low power consumption microprocessor technology.
* Automatic memory material code and sound velocity value, convenient to use.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Housing Material:Strong, Light Weight ABS-Plastic
Display:4 Digit, 10 mm LCD
Measuring Range:1.0200mm/0.048 inch
Resolution:0.1mm
Accuracy:(0.5%n+0.05)
Sound Velocity:5009, 990m/s
Lower Limit of Pipes:15x2.0mm20x3.0mm(Determined By Transducer)
Operating Conditions:Temperature:040C;Humidity:
Additional Information:
Payment Terms :
Ultrasonic Thickness Meter TM-8818
1.Spec:
Used for measuring thickness and corrosion of pressure vessels, chemical equipment, boilers, oil storage tanks, etc.in industries of petroleum, shipbuilding, power station, and machine manufacturing.
2.Features:
* Using the latest high performance and low power consumption microprocessor technology.
* Bidirectional measurement, for materials within measurement range, thickness is measurable with know velocity, Conversely velocity is measurable with know thickness.
* Automatic memory material code and sound velocity value, convenient to use.
* Coupling symbol indication.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Housing Material:Aluminum Alloy
Display:Large Screen LCD
Measuring Range:0.75400mm(45#steel, Depend on Probe)
Resolution:0.1mm/0.1mm/0.001 inch
Accuracy:(0.5%n+0.05)
Sound Velocity:5009, 990m/s
Lower Limit of Pipes:15x2.0mm20x3.0mm(Determined By Transducer)
Operating Conditions:Temperature:040;Humidity:
Additional Information:
Payment Terms :
60Gloss Meter GM-6
1.Spec:
Widely used in Floor maintenance, Surface cleaning quality control, Stone and tile gloss measurement, Checking printed matter, Quality control of paint and ink, Polished metal surface, measurement.
2.Features:
* In accordance with international standard ASTMD523, ASTMD1455, ASTMC346, ASTMC584, ASTMD2457, DIN ENISO2813, DIN67530, ENISO7668, JISZ8741, MFT30064, TAPPIT480, GB9754, GB/T13891, GB7706 and GB8807. Its technical parameters conform with JJG696-2002.
* Accurate measurement, good repetitveness.
* Small in size, easy to carry.
* Auto calibration.
* Intelligent design, rapid measurement.
* Able to store 254 groups of measurements.
* Built-in lithium ion rechargeable battery.
* Backlight display, suitable for low light environment.
* Use USB/RS-232 data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Display:4 Digits Backlit LCD
Measuring Angle:60
Range:0.1200 Gloss Units
Gloss Units:GU
Accuracy:1.0GU
Resoltuion:0.1
Repeatability:0.5GU
Measuring Area:7x14mmEllipse
Data Memorized:254 Groups
Operating Conditions:Temp:040C;Humidity:
Additional Information:
Payment Terms :
20/60gloss meter gm-26
1.spec:
widely used in floor maintenance, surface cleaning quality control, stone and tile gloss measurement, checking printed matter, quality control of paint and ink, polished metal surface, measurement
2.features:
* in accordance with international standard astmd523, astmd1455, astmc346, astmc584, astmd2457, din eniso2813, din67530, eniso7668, jisz8741, mft30064, tappit480, gb9754, gb/t13891, gb7706 and gb8807. Its technical parameters conform with jjg696-2002.
* accurate measurement, good repetitveness.
* small in size, easy to carry.
* auto calibration.
* intelligent design, rapid measurement.
* able to store 254 groups of measurements.
* built-in lithium ion rechargeable battery.
* backlight display, suitable for low light environment.
* use usb/rs-232 data output to connect with pc.
* provide bluetooth data output choice.
3.specifications:
display:4 digits backlit lcd
measuring angle:20/60
range:0.1200 gloss units
gloss units:gu
accuracy:1.0gu
resoltuion:0.1
repeatability:0.5gu
measuring area:7x14mmellipse
data memorized:254 groups
operating conditions:temp:040c;humidity:
Additional Information:
Payment Terms :
20/60/85gloss meter gm-268
1.spec:
widely used in floor maintenance, surface cleaning quality control, stone and tile gloss measurement, checking printed matter, quality control of paint and ink, polished metal surface, measurement
2.features:
* in accordance with international standard astmd523, astmd1455, astmc346, astmc584, astmd2457, din eniso2813, din67530, eniso7668, jisz8741, mft30064, tappit480, gb9754, gb/t13891, gb7706 and gb8807. Its technical parameters conform with jjg696-2002.
* accurate measurement, good repetitveness.
* small in size, easy to carry.
* auto calibration.
* intelligent design, rapid measurement.
* able to store 254 groups of measurements.
* built-in lithium ion rechargeable battery.
* backlight display, suitable for low light environment.
* use usb/rs-232 data output to connect with pc.
* provide bluetooth data output choice.
3.specifications:
display:4 digits backlit lcd
measuring angle:20/60/85
range:0.1200 gloss units
gloss units:gu
accuracy:1.0gu
resoltuion:0.1
repeatability:0.5gu
measuring area:7x14mm(ellipse)
data memorized:254 groups
operating conditions:temp:040c;humidity:
Additional Information:
Payment Terms :
20/60/85Gloss Meter GM-2000
1.Spec:
Widely used in Floor maintenance, Surface cleaning quality control, Stone and tile gloss measurement, Checking printed matter, Quality control of paint and ink, Polished metal surface, measurement.
2.Features:
* In accordance with international standard ASTMD523, ASTMD1455, ASTMC346, ASTMC584, ASTMD2457, DIN ENISO2813, DIN67530, ENISO7668, JISZ8741, MFT30064, TAPPIT480, GB9754, GB/T13891, GB7706 and GB8807. Its technical parameters conform with JJG696-2002.
* Accurate measurement, good repetitveness.
* Small in size, easy to carry.
* Auto calibration.
* Intelligent design, rapid measurement.
* Able to store 56 groups of measurements.
* Can display gloss value of 20, 60, 85 at the same time.
* Built-in lithium ion rechargeable battery.
* Backlight display, suitable for low light environment.
* Use USB data output to connect with PC.
* Provide Bluetooth data output choice.
3.Specifications:
Display:4 Digits Backlit LCD
Measuring Angle:20/60/85
Range:0.12000 Gloss Units
Gloss Units:GU
Accuracy:1.0GU
Resolution:0.1
Repeatability:0.5GU
Measuring Area:7x14mm(Ellipse)
Data Memorized:56 Groups
Operating Conditions:Temp:040C;Humidity:
Additional Information:
Payment Terms :
20/45/75Gloss Meter (Inetgral Type) GM-247
1.Spec:
Glossmeter have different kinds of measurement angles.Generally, 20applies to High Gloss Materials, 60applies to Medium Gloss Materials, 85applies to Low Gloss Materials.
2.Features:
* In accordance with international standard ASTMD523, ASTMD1455, ASTMC346, ASTMC584, ASTMD2457, DIN ENISO2813, DIN67530, ENISO7668, JISZ8741, MFT30064, TAPPIT480, GB9754, GB/T13891, GB7706andGB8807.Its technical parameters conform with JJG696-2002.
* Accurate measurement, good repetitiveness.
* Automatic calibration.Small in size, easy to carry.
* Intelligent design, rapid measurements.
* Able to store 254 groups of measurements.
* Applies USB, Bluetooth data output.
* Bulit-in lithium ion rechargeable battery.
* Backlight display, suitable for low light environment.
3.Specifications:
Display:4 Digits Backlit LCD
Measuring Angle:20/45/75
Range:0.1 200 Gloss Units
Gloss Units:GU
Accuracy:1.0 GU
Resolution:0.1
Repeatability:0.5 GU
Measuring Area:7 x 14 mm(Ellipse)
Data Memorized:254 Groups
Operating Conditions:Temp:0 40C;Humidity:< 85% RH
Power Supply:3.7 V Lithium Ion Rechargeable Battery
Dimensions:140 x 45 x 75 mm
Weight:305g(Including Batteries)
Standard Accessories:Main Unit, Holder with Calibration Standard, AC Adapter, Optical Cleaning Cloth, Carrying Case(B04), Operation Manual
Optional Accessories:USB Data Cable with Software, Bluetooth Data Adapter with Software
Additional Information:
Payment Terms :