Write a Review
Our Products
Ladies Leggings
2 Products availableGaskets And Gasket Material
1 Products availableCladding Materials And Building Panels
1 Products availableHardware Fittings And Accessories
1 Products availableSteel Plates
1 Products availableCaster Wheels, Casters & Rollers
1 Products availableCompression Springs & Air Springs
1 Products availableAutomotive Body Coach Building
1 Products availableBandages
1 Products availableOur product range contains a wide range of Floor Standing Racks, Table Racks, Wallmount Racks, Softline Floor Standing Racks and RUGGEDISED RACKS
Purvatech Solutions Offers indigenously developed designed Floorstanding Enclosure with good international look for various applications. This is 19" Floor standing rack with subrack mounting plane, adjustable to suit user's requirement. FEATURES :
SCOPE OF SUPPLY :
MATERIAL & FINISH :
Available in Powder Coated with standard colour options
Purvatech Solutions Offers indigenously developed designed Wall Mounted Enclosure with good international look for various applications. It is ideally suited for small networking installations, machine tool controllers and telecommunication applications FEATURES :Double Hollow Aluminium Extrusions for best rigidityAdjustable mounting rails both on front and rearCable entry at the top and bottomFront Perspex door with lockAvailable in two versions, single section and doubleLoad capacity 25 kgs
SCOPE OF SUPPLY CABINET WITH PERSPEX DOOR :Wall Mounting brackets 4 numbersAdjustable mounting angles 4 numbers
Purvatech Solutions Offers indigenously developed designed Softline Floorstanding Enclosure with good international look for various applications. It is ideally suited for mobile vehicles and places where mobility of people is more. FEATURES :
SCOPE OF SUPPLY :
MATERIAL & FINISH :
Available Standard Sizes :
OPTIONAL ACCESSORIES :
Rugggedised Rack with EMI/RFI protection is Purvatech Solutions speciality. Racks are manufactured as per the Customers Requirements, Specifiscations, Drawings. These Cabinets are subject to Tests as per JSS 55555 and ESS tests as per NAVAL standards. Many of our reputed customers have got certified for their testing centers.
ELECTRO MAGNETIC COMPATIBILITY BY Purvatech Solution RUGGEDISED RACKS :
Electrical, magnetic and electro-magnetic fields are everywhere. Also around enclosures and equipment housings.
Technical Systems can fall a prey to these electromagnetic environment, the devices themselves may produce electromagnetic fields in the course of their normal operation, leading similarly to interference or even damage or destruction in their vicinity.
EMC is attainment of a defined interference immunity (protection against external interference fields) Prevention / reduction of emitted interference (protection for the environment against own interference fields).
Many of the Purvatech Solutions racks, since made of Alluminium Extrusions offer electrical devices significant protection against electromagnetic interference fields.
An electro conductive connection is achieved between the outer surfaces of the enclosure by fitting a special conductive seal. The inner surfaces and the seal edges remain unpainted. Corrosion protection is provided by the aluminium-zinc coating of the base material.
Ruggedised Racks
Sinusoidal Vibration Test with frequency sweep :The cabinet is mounted on its shock mounts.It is tested for the following vibration levels in all the three mutually perpendicular directions. The frequency is to be swept slowly at the rate of 1 octave per minute from 5 to 33 Hz with a constant displacement amplitude of +/- 0.125 mm. The total duration of the test is 10 hours. One hour endurance test at resonance frequency and if no resonance found one hour at 14, 23 & 33 Hz.
Shock Test : The cabinet withstands following shock test after mounting on the test bench with shock mounts using 200 kg weight falling vertically from a height of 1.5 meters, two lateral blows with a weight of 200 kg at a radius of 1.5 meters falling through an angle of 60 degrees, two end blows with a weight of 200 kg at a radius of 1.5 meters falling through an angle of 60 degrees.
Ruggedised Racks
Drip Proof : Test is to be carried out in fully assembled cabinet for a period of 15 min a) by keeping in equipment in vertical position, b) by keeping an equipment at an angle of 15 degree to vertical.
Mould Growth :The sample component is introduced within 15 min of spraying into the chamber where working space is maintained at a temperature of 29 degrees C +/- 1 degree and a relative humidity of not less than 90% the sample is exposed in the chamber of 28 days.
Salt Corrosion Test : The rack is stored at a temperature of 35 degrees C +/- and relative humidity of 90% for a period of 7 days.
Bump Test :4000 bumps at 40g, 6 ms, done in packed conditions.
Fire Retardant Painting :Special painting with fire retardant paints is provided.
* Responsibility of Testing lies with the Customer
Customized 19 inch floor standing racks with, a canopy protruding out of the 19 inch module mounting frame.
Rugged design makes the canopy to take 150 Kg load, with Solid base frame.
With in-built LCD monitor fitting. Material of rack Aluminium Alloy, Material for Canopy M. Steel.
PT 11 series, Twin rack with wooden common table top and Two keyboard trays on teleslides.
PT 11 series floor standing customized rack, 1500 mm deep, 42 U height with rugged wheels, hinged side covers.
PT 11 series - Table racks with cutomised hinged side covers, with or without Leg space.
Ideal for comfortable working in sitting posture.
Keyboard and mouse tray and enclosure for computer either tower type or 19 inch rack mountable.
Can be made into various sizes.
Sameer Koparkar (Purvatech Solutions)
Shop 3 & 4, 1552, Abhiyan Society, Sadashiv Peth, Pune - 411030, Maharashtra., Sadashivpeth, India
Share us via
