Purvatech Solutions

Sadashivpeth, Pune, Maharashtra

PT 11 Series Stand for LED monitor and keyboard. Material MS.

Offres the flexibility in mounting the monitor and keyboard, at any height.

The assembly can be easily placed outside the rack so as to increase the utilization of rack space. Nickel chrome plated finish.

Totally flexible assembly and can rotate easily.

Sturdy aluminium keyboard from extruded aluminium profiles and sheets, giving a robust housing for the electronics and can be designed and custom fit to any size and type of keyboard, depending on the components

All pages of the modular can open with a screwdriver.

Dustproof enclosure, robust, with stand industrial and harsh use. Lightweight. Anodizing or powder coating. Screen printing available.

are used for supporting the thermal management. Cooling required for the important equipments can be achieved by fitting fan housing units next to them containing these cooling fans.

This is used for 19" horizontal mounting to provide the AC Power to various instruments in the Rack. 15 A MCB, Indicator lamp, Six 5A / 3 pin sockets are provided. 15A three sockets and a Spike Suppression model can be provided separately.

Front panel captive hardware sets are required for fixing 19" rack equipment directly to the mounting angles in the equipment cabinets. A set consists of Clip-Nut, Retainer, Cup Washer and M6 Decorative Screw.

These eye bolts are made of forged steel with load bearing capacity of 350 kgs. Four eye bolts are required for each cabinet.

Provided to support the equipments either from side or from the bottom depending on the accessories. Suitable for supporting 19" Rack Mounting Equipment 19" Enclosure

Drawers required for storage can be mounted on 19" enclosure system. Standard: Front Alluminium of 2.5 mm thick, rest is fabricated with CRCA sheet of 1.2 mm/1.6 mm, Pull out handles.

Special Nylon Legs are used to elevate cabinet by around 65 mm to avoid scratches to the bottom of cabinet or floor.Weight carrying capacity will be appx. 100 kgs.

Rubber moulded with 1.6 mm groove and diameter of 20 mm or 40 mm. Used for the cable entry inside the cabinets fitted on top or bottom of the racks

This helps in sending fresh air into the cabinets where there is congestion. It contains a centrifugal impeller fan. It is available in 1U, 2 U and 3U height and 19" width. It draws air in horizontally through 10 micron filters and expels it upwards into the cabinet. Also Available in built in Horizontal AC Power Distribution Arrangement

Blank 19" panels are useful for covering unused space at the front of the cabinet. They are made of 2.5 mm thick aluminium sheets and are anodized / powder coated.Available in 1U x 19" to 10U x 19" sizes.

Alluminium Three Section Ball Bearing: Support upto 70 kgs at full extension + Corrosion Resistant Ball Bearing High Quality in Stainless Steel: Capacity : Upto 30 kgs

These steel shelves are useful in supporting non 19" style equipment in 19" cabinets.1. Stationery Shelves: To be fixed directly to the Vertical rails2. Sliding Shelves: Are fitted with ball bearing telescopic slides Both the types are provided with Ventilation slots to aid the air circulation.

Castors are useful optional item for providing mobility to floor standing cabinets. Normally two castors with foot operated brakes and two without brakes are used. They are made nylon. Suitable for PT -10 Series Racks.Available in medium duty (180 kgs. Max) and heavy duty (350 kgs. Max)

Rubber moulded product with steel hardware, interfaces between cabinets and platform to absorb vibrations to some extent.Selection of type is done based on weight of the cabinet and frequency of vibrations.Available with weight carrying capacity of 10, 25, 40, 60 and 85 kgs.

Made from GFN (Glass Filed Nylon) 30% plastic material. All the pieces are in single lengths and are suitable for 80 mm, 100 mm, 160 mm, 220 mm, and 280 mm deep PCBs.Special Feature is that it can take 1.6 mm to 2.4 mm thick PCB without any play in card guide. These card guides are specially designed to absorb vibrations. Also offers Stainless Steel card guides suitable for 1.6 mm to 2.4 mm thick PCBs with vibration absorbers.PCB guides are easy to fit, simple snap on type with good amount of rigidity and pass through 2g vibration test

Made of plastic. These legs are used for PT 20 and PT 30 series racks. Available as 2 flat and 2 with tilts. Weight Carry Capacity: 5 kgs.

Made of 2.5 mm Aluminium. Mostly Annodised. Facia Panel consists of PCB holder for Mounting PCBs. It can be fixed to the cards as well as to the Rack.

Made of 2.5 mm Aluminium. Mostly Annodised. Facia Panel consists of PCB holder for Mounting PCBs. It can be fixed to the cards as well as to the Rack.

These slide into special grooves in the aluminium profile to allow fixing Front panels, Facias and Modules. These strips can be with M 2.5 and M 3 tapped holes.Maximum length 84T, Cross Section 2 mm/6 mm. Made of M.S or S.S. 304 duly electropolished.

This is also made from GFN 30% plastic material. It connect to PCBs and Facia.

Made of 1.2 mm Aluminium Sheet , with/without ventilation slots

Front and rear panels are available for all standard models of card rack. These panels can be of Screw on type or hinged type ( hinged either on sides or at bottom )

Made of alluminium, used to mount Euro connectors on rear profile of card rack. Max length 84T.

Elastomore core and braided with Gold plated wires, available in 2 mm to 8 mm size. Foldover fingure types, gold plated of various sizes.

Very useful for making the racks RF proof. These are developed by have been very successfully used in the Ruggedised Racks.

Used for Orderly and Structured routing of cables, consists of mounting panel to which are fixed a number of cable loops. They help to run the cable bunches horizontally along the front or rear of the cable and branch out the connections to termination points directly above or below.