Voltage Measuring Instruments in Pune

• Power : 230 V AC, +/- 10% , 50/60 Hz

High Voltage Breakdown Tester Audio and Visual Alarm when HV ON and Off Test ON OFF Switch to Start and Interrupt Test. Unique Data Hold facility to Hold Breakdown Voltage data. Precise Trip Current Setting or Press to Set Switch for Leakage Current Inbuilt Timer with Selector Switch. more...

• Power Supply : 230V±10%, single phase, 50Hz

Voltage tester Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and leakage current programmable by external 0 to 10 V DC. Audio (Buzzer) and visual (Neon) alarms when HV is ON, Output Trips when breakdown occurs i.e. leakage exceeds than set urrent. more...

• Type : Voltage Regulators
• Material : Aluminium, Brass, Fiberglass, Frp, Glass, Plastic, Porcelain
• Current Type : AC
• Condition : New, Old
• Operating Temperature : -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Color : Creamy, Golden, Green, Light Green, Metallic, Off White, Shiny Silver, Silver, Sky Blue, Yellow
• Puncture Voltage : 0-50KW, 100-200KW, 200-400KW, 400-800KW, 50-100KW
• Automatic Grade : Manual, Semi Automatic
• Feature : Accurate Reading, High Performance, Lightweight Specifications, Longer Service Life, Robust Construction, Rust Proof, Shocked Proof
• Certification : CE Certified, CQC Certified, IAF Certified, ISI Certified

more...

• Type : Voltage Regulators
• Application : Voltage Flow
• Material : Aluminium, Brass, Fiberglass, Frp, Glass, Plastic, Porcelain, Resin
• Condition : New, Old
• Feature : Accurate Reading, High Performance, Lightweight Specifications, Longer Service Life, Robust Construction, Rust Proof, Shocked Proof
• Operating Temperature : -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C
• Color : Creamy, Golden, Green, Light Green, Metallic, Off White, Shiny Silver, Silver, Sky Blue, White, Yellow
• Current Type : AC, DC
• Puncture Voltage : 0-50KW, 100-200KW, 200-400KW, 400-800KW, 50-100KW
• Automatic Grade : Manual, Semi Automatic

more...

Breakdown Voltage Tester is ideal for measuring the breakdown voltage of the electrical components, transformers and insulation material instruments. It also helps in determining the quality of insulating material prior to their utilization in various electrical applications. This method of test is inten more...

The covering of the enamel film on the conductor may or may not be continuous. Certain number of discontinuities or pinholes in this enamel film are allowed as per the relevant standard as a completely defect free processing is always not possible. This instrument is designed to detect and count these discont more...

• Warranty : 2yrs
• Used for : Testing insulation of HV power cables
• Power Source : Electric
• Frequency : 66Hz
• Feature : Easy To Use, Proper Working
• Color : White
• Application : Voltage Testing

The High Voltage Tester supplied and exported by us is manufactured as per the set standards and regulations. This High Voltage Testers are available in AC and DC types and are used for testing HV cables after installation and repair for ensuring efficient performance. It also indicates voltage withstands lev more...

• Output Voltage : 4 kV, 8 kV, 16 kV
• Medium Network : 11kV
• Power Supply : 230V AC + 10%, 50 Hz, Single phase.
• Input : 230V, 50Hz
• HV output : 0- 4-8-16 kV, 500 Joules
• High Energy : 1000 Joules At Each Range (Optional 2000j).

High Voltage Surge Tester (ST-16) is ideal for pinpoint location of faults in underground LT/HT cables. The High Voltage Surge Tester (ST-16) is known for its portability and versatility. It is suitable to locate faults in all LT cables and HT cables up to 11 kV class. Attributes : Portable Mounted on castors more...

• High Energy : 1000 Joules At Each Range (Optional 2000j).
• HT Network : 33KV.
• Voltage : 8KV, 16KV, 32KV Continuously Variable.
• HV output : 0- 8-16-32 kV, 1000 Joules.
• Medium Network : 11kV
• Power Supply : 230v AC + 10%, 50 HZ, Single Phase.

High Voltage Surge Tester (ST-32) is ideally used to pinpoint location of faults in underground LT/HT cables. The High Voltage Surge Tester (ST-32) is known for its portability and versatility. It is suitable to locate faults in all HT cables ranging from 11 kV up to 33 kV class. Attributes : Portable Mounted more...

• Over Load : Range-1.0A-999.9A, Default- 10.0A.
• Dimension : 96(W) X 96 (H) X 80(D) mm
• Over Voltage Sense Delay : Range- 1 sec-60 sec, Default-2 sec.
• CT Ration : Settable 30A/5A to 999A /5A, Default- 50A/5A.
• Over Load Sense Delay : Range- 1 sec-60 sec, Default-2 sec.
• Cutout dimensions : 92 (W) X 92 (H) mm
• Supply : 1 Phase 230 V AC, 50 Hz
• Over Voltage : Range-210V-270V, Default- 260V.
• Under Voltage : Range-170V-120V, Default- 170V.
• Display : 3 digit 0.5 7 sec LED

VAF meter displays the Phase-Phase Voltages Phase - Neutral on the first row, Second row displays frequency & the Third row Displays the Ampere Value. VAF meter displays the Phase-Neutral Voltages, Frequency & the Ampere Values of the line, In the scrolling pattern. more...

• Output Supply Voltage range : 280-500VAC supply (3-Phase)
• Auxiliary supply : Built-in(Additional supply not required)
• Contact Rating : 10 Amps. 230VAC
• Frequency : 50Hz +/- 3%
• Cutout : 92(W) X 92 (H)
• Trip Time Delay : 50 m sec
• Contact Type : C/NO potential free Rating 5 A at 230 VAC
• Unbalance Trip setting : 60V OFF….50V ON (Phase to Phase voltage)
• Technology : Micro controller based system

Protection of 3 Phase devices against Over voltage, Under voltage, Single Phasing, Reverse Phasing & unbalance supply are one of the major issue in electrical systems. For safe running of 3-phase devices, special protections that keep a continuous watch on supply conditions are very essential. The major cause more...

• Power Supply : 230V AC + 10%
• Output Voltage : 0-3 kV, 6 kV
• Phase : Single phase
• Frequency : 50 Hz

more...

Application It is used to pin-point underground cable faults in power transmission, distribution cable networks in acoustic mode with the help of suitable surge wave receiver. Key Features Pin-point location of cable faults in Low voltage cables by acoustic method. Output voltage selectable ranges 0-2kV, 4 kV more...

It is used to pin-point underground cable faults in power transmission, distribution cable networks in acoustic mode with the help of suitable surge wave receiver. Key Features Pin-point location of cable faults in Low, Medium and High voltage cables by acoustic method. Output voltage selectable ranges 8kV, 1 more...

• AC HV Tester : 5, 10, 80
• Model : ZMHVBT

Audio and Visual Alarm when HV ON and Off • Test ON and OFF Switch to start and Interrupt Test • Precise Trip Current Setting or Press to Set Switch for Leakage Current • Inbuilt timer with Selector Switch or variable by thumbwheel setting more...

• Maximum Test Voltage (kv) : 5, 10, 80
• Typical Leakage currents (mA) : 20, 30, 100, 350

Audio and Visual Alarm when HV ON and Off • Test ON and OFF Switch to start and Interrupt Test • Precise Trip Current Setting or Press to Set Switch for Leakage Current • Inbuilt timer with Selector Switch or variable by thumbwheel setting more...

• Power Supply : 230V±10%, single phase, 50Hz

Test Voltage DC : 0 to 5000 V continuously variable by multi turn potentiometer AC : 0 to 5000 V continuously variable by multi turn potentiometer (with AC or DC test voltage selector switch) Tripping Current Adjustable 1.0 to 30.0 mA by press to set switch and potentiometer on mA meter OR Test Voltage and le more...

We are the well-known Importer and Supplier of Test Equipment . We source these Test Equipment from industry�s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision meas more...

We are the well-known Importer and Supplier of Test Equipment . We source these Test Equipment from industry�s trusted manufacturers. Our state of the art Test Equipment are in compliance of stringent quality norms, thus in huge demand worldwide. These Test Equipment are exclusively made for precision meas more...

Automatic handling, storage, and distribution of the products become easy with our automated warehousing system. Also, our storage facility is timely upgraded to meet the changing market scenario. We effortlessly dispatch the product basket to the clientele as we have excellent, wide connectivity and trusted more...

Our packing system is systematized in such a manner that we can handle even bulk packaging with ease. Moreover, our packing experts take care of the customized as well as standard packing demands of the clients. We have become a preferred choice of the patrons owing to our timeliness and client centric approa more...

Digital two pole voltage tester HT9 provides daily use features. In addition to DC / AC voltage measurement and  continuity test, HT9 also offers gas-filled lamp test and  phase sequence / conformity detection features. To overcome difficult pinpointing of the right cable within a frame on a switchboard und more...

Pen Phase Sequence Indicator and Conformity Test The HT70 pen voltage detector permits both to quickly verify the presence of AC voltage on any type of electrical installation (sockets, cables, fuses, switchboards, etc.) with and without direct contact and also to perform phase sequence indication and conform more...

We are engaged in manufacturing and supplying High Voltage Detector of premium quality that is ideally used in voltage detection. Features • Designed for 11KV to 440KV AC 50 Hz overhead lines in EHV Switch yards, Transmissions lines, Power Plants   and similar installations. • Supplied as a complete Kit more...