Orifice Flow Meter in Pune

• Dimensions WM Type : 310 (L) x 160 (W) x 105 (D)
• Mounting : Wall/Panel
• Enclosure : Al Diecast/ABS Plastic
• Supply Type : Manufacturer
• Power supply : 85 to 265V AC,50Hz, single phase
• Pressure range : 1 to 50 kg/cm2 (g) or Bar (g) max.-programmable
• Data logging : Approx readings: 3000 for normal logging &Approx 5500 readings for extended logging
• Density Compensation : Online monitoring and compensation of density
• Comm. Port : RS485 std., RS232 (Optional)
• Flow type : Compensated/Uncompensated programmable

more...

• Material : AISI 316, AISI 304, Monel, Hastelloy C
• Model : 115 FMS, 305 FMS
• Line Size : 15 NB – 600 NB (1/2” – 24”)

The compact flow meter is specially designed flow meters which installation cost is very low as compared to the conventional orifice flow meter. It substantially reduces the pressure leak points giving energy saving.  The orifice flow meter offered by us is applicable in various industries for measuring the more...

• Power : 24VDC Or 220VAC
• Line Size : DN15~DN1000
• Supply Type : Manufacturer
• Display : Digital
• Usage : Industrial, Chemical Flow Measurement, Water And Chemicals, Steam And Gas Flow Measurement
• Certificate : ISO 9001:2008 Certified
• Brand Name : CBRO
• Material : M.S, S.S.
• Country of Origin : India
• Operating Type : Digital

Make CBRO Model Name/Number SFM250 Service Saturated and superheated steam, hot water, thermic fluids in closed pipes MOC of flanges MS Orifice flange assembly WNRF class 300 DPT With display Data logging 3450 readings or 6900 readings (Optional) Output 4-20mA Comm Protocol RS232/485 Modbus Protocol Typical t more...

• Type : Orifice Plate Flowmeter
• Line Sizes:1/2" to 24". : Process Connections:1/4
• Supply Type : Supplier
• Installation:Standard flange 125#/150# rating. : Pipe Requirements:General requirements 10 diameter upstream and 5 diameter downstream.
• Packaging Type : Corrugated Box
• Material : Buna-N Gaskets.
• Accuracy : ±0.6% Full Scale Flow. (Beta= .2-.6) ±0.7% For Beta Greater Than .6.
• Application : Compatible Liquids And Gases.
• Accuracy:±0.6% full scale flow. (Beta= .2-.6) ±0.7% for Beta greater than .6. : Temperature Limits:-50 to 200°F (-45 to 93°C).
• Pressure Limits:150 psi max : Head Loss:1 - Beta ratio², eg: 1 - 07² = 1 - 0.49 = 51% of the d.p.

Orifice Plate Flowmeter Series OP Orifice Plate Flowmeter The Series OP Orifice Plate Flowmeter is a complete orifice plate flow metering package. It incorporates a stainless steel orifice plate with a unique holder or carrier ring containing metering taps and integral gaskets. It was designed for use whereve more...

• Supply Type : Manufacturer

Orifice Type Flow Meters are one of the best flow meters to measure flow rate of liquids. Our Orifice Type Flow Meter are manufactured using high grade material and advanced technology, which makes it possible for our products to serve our clients with optimum service. Our products are known for their accurat more...

The Weld Neck Flange is normally referred to as "High Hub" flange. It is designed to transfer stresses to the pipe, thereby reducing high stress concentrations at the base of the flange. The pressure tappings are provided through the flange which are at a distance of 1" from the face of the plate. more...

The GFMc-150 flow meter is applicable for measuring flow rates of Bio-gas, LPG, Compressed air and other compressed gases in closed conduits. It is best suited for applications where affordability, reliability and ruggedness are of prime concerns. more...