Digital IO Modules in Pune

• 0° to 60° C : Storage
• +/-3.45V  ( i.e. 1.5 % of rated voltage 230 V ) : Current
• Level 3 as per IEC1000-4-3 : Immunity to Conducted RF
• Level 3 as per IEC1000-4-2 : Immunity to Transients
• 10% to 90% (Non condensing) : Mounting
• Maximum Load current : 500 mA
• 0 to 5 VDC : Logic ‘1’ Voltage
• +/- 2 % of Full Scale 5A * CT ratio.   : Active Power
• 4 : Rated Input Voltage
•   : Operating

  Features Low cost compact 3 phase Energy measurement module 3 phase voltage input up to 300 Vrms (Line-Neutral) and current input up to 5 A can be measured Measures Voltage, Current, Frequency, Active Power, Reactive Power, True Power, Average Power and Power Factor Facility for 4 bi-directional digital in more...

• Isolation : 1.5KV isolation between communication ports, I/O and power supply section.
• Maximum Load current : 500 mA
• Input Impedance : 5.6 k
• Rated Input Voltage : 24 VDC (Max is 28VDC)
• Radiated emission : as per EN61000-6-4
• Power Supply : +24 V DC ± 10%
•   :  
• Immunity to Radiated electromagnetic field : as per IEC61000-4-3
• Logic ‘0’ Voltage : 0 to 5V
• Rated Input Current : 4mA

  Features Low cost compact Digital I/O modules with DIN rail mounting 2 wire RS 485 port provided on pluggable terminal block User definable Address, Baud rate and Parity through DIP Switch High Speed Modbus RTU (Slave) communication LED indication for each Input and Output , COM Port and Power ON  No conf more...

• Digital Outputs: Open Collector Relay (NO or NC) : 50 V DC, 0.25 Amp. max. 230 V AC, 2Amp.
• Humidity : 10% to 90% (Non condensing)
• Temperature: Operating Storage : 0o to 60o C -20o to 80o C
• Immunity to Transients : Level 3 as per IEC 1000-4-4
• Immunity to Conducted RF : Level 3 as per IEC1000-4-6
• Emissions : EN55011 CISPR A
• Immunity to ESD : Level 3 as per IEC 1000-4-2
• Mounting : DIN rail or back panel mounting
• Dimensions (DIN rail) : 155 X 102 X 48 mm
• Communication: COM1 COM2 : To Programming terminal / Operator interface / Eagle I/O / RDIO To PLC or as Modbus Slave

  Features DIN rail or panel mounted compact Digital I/O module Direct connection to PLC programming port Direct connection as Modbus Slave on RS485 network or RS232 link Up-to 32 digital inputs and 32 digital outputs Dual serial ports for connection of programming terminal / Operator Interface or SCADA LED more...

• Voltage : 220V
• Feature : Accurate Dimension, Designed With Precision, Durable
• Warranty : 3yrs
• Weight : 200gm
• Frequency : 50Hz, 60Hz

more...

• Feature : Accurate Dimension, Durable, Reliability
• Voltage : 220V
• Power : 24VDC
• Frequency : 60Hz
• Type : Wet
• Channel : 4

more...

The ET-7x00/PET-7x00, a web-based Ethernet I/O module, features a Built-in web server which allows configuration, I/O monitoring and I/O control by simply using a regular web browser. Remote control is as easy as surfing the Internet.   Besides Web HMI function, no more programming or HTML skills are req more...