Centrifugal Oil Cleaner in Pune

• Minimum oil feed pipe size : 19mm internal diameter.
• Supply Type : Manufacturer
• Minimum oil drain pipe size : 76mm internal diameter
• Suitable for oil sump : 400 to 1000 liters
• Rotor dirt holding capacity : 4 liters.
• Rotor oil capacity : 4.5 liters.

BENEFITS Suitable for oil sump 400 to 1000 liters. Rotor dirt holding capacity 4 liters. Rotor oil capacity 4.5 liters. Minimum oil feed pipe size 19mm internal diameter. Minimum oil drain pipe size 76mm internal diameter. Oil inlet threads and Cut Off Valve ( C.O.V. ) ratings can be tailored to suit customer more...

• Supply Type : Manufacturer
• Rotor dirt holding capacity : 6 liters.
• Rotor oil capacity : 6.5 liters.
• Minimum oil feed pipe size : 19mm internal diameter.
• System capacity over : 400 liters
• Net weight : 25kg

BENEFITS Suitable for system capacity over 400 liters. Rotor dirt holding capacity 6 liters. Rotor oil capacity 6.5 liters. Minimum oil feed pipe size 19mm internal diameter. Minimum oil drain pipe size 76mm internal diameter. Oil inlet threads and Cut Off Valve ( C.O.V. ) ratings can be tailored to suit cust more...

• Supply Type : Manufacturer
• DRUM SPEED (RPM) : 6930
• Weight : 250 Kg
• SOLID SEPARATION : YES
• DISCHARGE METHOD : MANUAL
• DIMENSION ( L X W X Ht : 850mmX625mmX1200mm
• WATER SEPARATION : YES

Filtek India (P) Ltd has introduced a Centrifugal Oil Purifier to remove all solid impurities and water from light diesel oils (LDO), diesel, heavy fuel oils (HDO) and mineral oils to ensure reduction in engine wear resulting in extension of equipment life. more...

• Dirt Holding Capacity : ½ ltr.-12 ltrs.
• Pump : 10 LPM-80 LPM x 2
• Centrifuge Model : SCC 075-SCC 600 x 2

Centrifugal Oil Cleaner operates on the Reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor thru hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed up to 7000 RPM & above. The resultant more...

Centrifugal Oil Cleaner operates on the Reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor thru hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed up to 7000 RPM & above. The resultant more...

Centrifugal Oil Cleaner operates on the Reaction turbine principle. Oil enters the Centrifuge under pressure and passes into the rotor thru hollow rotor shaft. The oil pressure and flow is converted in rotational energy as the oil escapes through the jets, producing speed up to 7000 RPM & above. The resultant more...

• Supply Type : Manufacturer

Centrifugal oil filters Top driver pulley is gear drive type on the OD and is designed such that to eliminate any belt slippage.Wiper holder set with PU wipers to give perfect wiping and low wearing more...

• Supply Type : Manufacturer

Centrifugal oil cleaner Top driver pulley is magnetically charged and is designed such that to eliminate any belt slippage and wear as well maximum oil travel and removal from one side of the belt. more...

• Supply Type : Manufacturer

Centrifugal oil cleaning system It first passes through a mechanical filter which collects larger partics. The air is than passes through Ionizer where it is subjected to an intense electrostatic field. All the oil mist & Smoke particles receive a strong electrical charge. more...

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils of cement mills and is extremely effective in removing the cement dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifu more...

Centrifugal Oil Cleaner model 600s are widely in use on ALCO 251 series Locomotives for Mainline Diesel Engines in India. The fitment is done at the Diesel Loco Works at Varanasi where over 3000 engines have been in operation since the last 14 years. The inlet to the centrifuge is sourced from the lube pump o more...

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the coolant of wire and cable drawing machines and is extremely effective in removing the wear metal and dust contamination which is removed when the wire is drawn from blocks of Copper or Aluminum more...

Filtek FT Centrifuges are used successfully on Bio Diesel Manufacturing Systems for fine filtration of biodiesel. All contamination as well as wax and gummy insolubles are effectively removed more...

The Filtek Centrifugal Oil Cleaner model FT200/400/600 are widely used on marine generators on ships and on main engines of tugboats, supply ships, fishing trawlers etc as a very effective Bypass lube oil filtration unit. The centrifuge is driven by the lube oil pressure of the engine to clean the oil down to more...

The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils of cement mills and is extremely effective in removing the cement dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifu more...

• Supply Type : Manufacturer

  The Filtek Centrifugal Oil Cleaner is used as an added bypass filter in conjunction with the existing lube oil filter element. Smaller sized particles ranging between 1 micron and 5 microns are removed by the centrifuge which help increase the engine life a BENEFITS Longer oil life Longer engine life Zero more...

• Supply Type : Manufacturer

  The Filtek Centrifugal Oil Cleaner model CK600 is a self contained skid powered by an 80 LPM pump+motor to clean the gear box oils and is extremely effective in removing the dust contamination, wear metals and ingressed dust particles ranging between 1 micron and 5 microns. The Centrifuge being a cleanable more...