Calibrating Machine in Pune

• MOQ : 1 Piece
• Supply Type : Manufacturer
• Operating Temp Deg Celsius : 50
• Color : Grey
• Power Supply : Two Batteries of 9V, Size PP3 (optional) battery Eliminator for 230 V AC operation
• Size : 170 (H)* 90(W)*45(D)
• Pressure : Low Pressure
• Accuracy : 0.01
• Bridge Resistance Ohms : 500
• Country of Origin : India

more...

• MOQ : 1 Piece
• Weight : 1 kg approx
• Battery Life : 6 Hours in case of continuous operation for full current output 30 hours in case of continuous operation for mV/RTD output.
• Supply Type : Manufacturer
• Operating Temp : 0 to 50˚C
• MV : 0-199.99
• Humidity : Max 90% Rh non condensing
• Capacity : 10
• Condition : New
• Application : Calibration

eatures – uni calibrator suppliers handheld, battery operated, portable source and sink for mv, ma, & rtd(pt 100 din 43760) uni calibrator  – pt 100 reading directly in terms of temperature. uni calibrator  – independent calibration facility for mv, ma, ohm, temp. typical accuracy 0.1% ± 1 digit opt more...

• Battery Life : 30 hours approximately
• Item Code : RS-803
• Load : 0.25 Watts
• Effect of Temp.Change : 0.002% per Deg.C ref 25ºC
• Size : 170(H) * 90(W) * 45(D)
• Supply Type : Manufacturer
• Storage Temp : 0 to 70ºC
• Range : 200º to 600º C”
• Accuracy : ±0.1% of F.S. ( For 0 to 400º C)

more...

• MOQ : 1 Piece(s)
• Dimension : 180 (L) x 90 (W) x 47 (D) mm (with protector)
• Storage Temperature Range : < -10 Degree C ~ 55 Degree C
• Condition : New
• Temperature Coefficient : 0.1 x (dedicated Accuracy) % / DegreeC (5 DegreeC ~ 18 DegreeC, 28 DegreeC ~ 40 DegreeC)
• Humidity range : < 80% RH
• Operating Temperature Range : 0 ~ 50 DegreeC
• Display Type : Digital
• Power : 1.5V x 2 alkaline batteries.
• Weight : About 500g

more...

• Weight : 1.25 kg Approx
• Accuracy : 0.1 % ± 3 digits

Make ZEAL Model ZMPCM INPUT POWER 230 V ± 10% AC single phase DIGITAL METER (4½dgt)LED DC Current source Range 0 to 20mA Accuracy 0.1 % ± 3 digits DC Voltage source Range 0 to 200 mV Accuracy 0.1 % ± 3 digits RTD(fix 10 positions)-50, -25, 0, 25, 50, 75, 100, 200, 300, 400˚CTransmitter Power Supply DIMEN more...

• Operating Temperature : 25 +/- 30C, RH<70%
• Power : 230V, 1A, 50/60 Hz

Stability suitable to calibrate DMM, DPM, Clamp Meters and Analog Meters • Pure Sine wave for AC Voltage and AC Current with variable frequency • Short Circuit and Overload Protection • Safe for User and unit under calibration Dimensions: (W 550 x H 170 x D 550) mm, Weight: 35 kg without packing more...

• RTD (Fix 10 Positions) : 0, 25, 50, 75, 100, 200, 300, 400˚C
• Input Power : 9V x 2 Batteries 100mAH,With Charger.
• DC Current source Range : 0 to 20mA
• Model : ZMPCB (Battery Operated)
• Make : Zeal
• Digital Meter (41/2 dgt LCD) :  
• DC Voltage source range : 0 to 200mV
• Accuracy : 0.1% of set temp

We manufacture and export of mV mA RTD Calibrators. The calibrator is a compact, lightweight, and easy to carry tool. Calibrator is a precision source of mA , mV & RTD. mA range is from 0 to 20mA. mV Range is from 0 to 200mV. RTD source is derived by fix 8 positions. These 8 positions simulate precision tempe more...

• mA = 0 to 25.00 mA :  
• • Display : 4 1/2 Digit LCD
• • Range : RDT= 100 to 400°C
• 24VDC Loop Power with (Battery & Main Model) :  
• mV = 0 to 199.99 mV :  
• Input : RTD /mV /mA
• • Accuracy level : ± 0.1% of Span
• • Effect on Temp : 0.002% (REF 25°C ) 25°C )

Feature : • Portable Battery & Mains ( 240VAC/50Hz) operated • LCD Display • Source and sink for mV, mA, & RTD • Light waight & with carry bag • Direct feed switch for mV/mA RTD • Power on switch more...

• Range : RDT= 100 to 400°C mV = 0 to 199.99 mV mA = 0 to 25.00 mA
• Input : RTD /mV /mA
• Display : 4 1/2 Digit LCD

Feature : • Portable Battery & Mains ( 240VAC50Hz) operated • LCD Display • Source and sink for mV, mA, & RTD • Light waight & with carry bag • Direct feed switch for mVmA RTD • Power on switch more...

• RANGES : 0 to 200 mV 0 to 25 mA 0 to 500V
• RESOLUTION : 10 uVformV 0.01 mA 0.1 V or 0.1 °C
• SIZE WEIGHT : 90 (H) x 215 (W) x 230 (D) mm 2 kg (Table Top) 1 kg (Portable)
• ACCURACY : 0.1 % of FS 0.15% of FSformA 0.2 % of FS for RTD
• POWER SUPPLY : 230V AC, SOHz for table top model 2 Batteries of 9 VDC for portable model
• FUNCTIONS : mV, mA Resistance source mV, mA Read
• INDICATION : 4 1/2 digit LCD / LED - Green mV, mA and V or °C
• OPERATIONGTEMP & HUMIDITY : 10to50°C, 90%Rhmax
• BATTERY LIFE : 6 hrs. incase of full o/p currect 30 hrs. when no o/p current 90

INTRODUCTION   Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used more...

Analogik universal calibrator is very useful tool to calibrate many types of process control instruments which accepts mV and mA and resistance. The universal calibrator is designed to give highest stability and accuracy. The calibrator can be used for lab or inhouse purpose as well as to used on field. This more...

• Supply Type : Manufacturer

The new fluke 725 multifunction process calibrator is a powerful yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. more...

• Supply Type : Manufacturer

KM CAL 700 VOLT / mA CALIBRATOR SOURCE & MEASURES Kusam Meco Calibrators ACCESSORIES : Double insulation Test Leads , 2 Crocodile Clips, DC 1.5V (AAA) Battery x 6, Carrying Case, User’s Manual. SKU:  KMCAL700 Category: Calibrators Tags: loop calibrators,  calibration instruments,  instrument calibrator more...

• Supply Type : Manufacturer

Mode KM-CAL-720 RTD CALIBRATOR Kusam Meco Industries SKU:  KM720 Category: Calibrators Tags: calibration instruments,  instrument calibrator,  km cal 720, Kusam meco calibrators,  RTD calibrators more...

• Supply Type : Manufacturer

Model-DGCH - 25 It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calib more...

• Supply Type : Manufacturer

It is a uniq design for checking Dial gauges having least count 0.01mm and 0.001mm this is a  Real 2 in 1  calibration tester, since both 0.01 & 0.001 dials can be tested in one cablibration tester. This tester is used in calibration laboratories for checking plunger dials, Lever type dials, bore gaugesAll more...

it is designed to tackle most common trouble-shooting during commissioning and routine maintenance. Model 45-B is truly hand held calibration instrument purposely limited functionally to simplify its use. With all its features 45-B battery operated field calibrator is an essential tool in a service engineer's more...

Model 45-M tabletop universal calibrator is widely used for in-house calibration and testing of process control instruments. It's simple operation, high accuracy and stability make 45-M an essential instruments in production units, calibration and quality control laboratories, and service stations in instrume more...