Cure Time (Fixture/Full Strength)* : 20 min. / 24 hr.
Temperature Resistance for Continuous Service : 300 F (150 C)
Available Sizes : 50 ml, 250 ml
Breakaway/Prevail Torque lb. in. (N.m.) : 190/280 (22/32)
Fastener Size Up to 3/4" Strength High Cure Time (Fixture/Full Strength)* 20 min. / 24 hr. Breakaway/Prevail Torque lb. in. (N.m.) 190/280 (22/32) Temperature Resistance for Continuous Service 300 F (150 C) Available Sizes 50 ml, 250 ml Red 262 is a high strength product that is more...
Cure Time (Fixture/Full Strength)* : 20 min. / 24 hr.
Temperature Resistance for Continuous Service : 300 F (150 C)
Breakaway/Prevail Torque lb. in. (N.m.) : 53/30 (6/4)
Fastener Size Up to 1/4" Strength Low Cure Time (Fixture/Full Strength)* 20 min. / 24 hr. Breakaway/Prevail Torque lb. in. (N.m.) 53/30 (6/4) Temperature Resistance for Continuous Service 300 F (150 C) Available Sizes 50 ml, 250 ml Recommended for low-strength threadlocking of admore...
Maximum Pressure Resistance (psi) / Cure Time : 10000 psi / 72 hrs.
Substrate to be Sealed : Metal
Maximum Thread Size : Up to 2"
Temperature Resistance : 300 F (150 C)
Description White Paste Maximum Thread Size Up to 2" Temperature Resistance 300 F (150 C) Maximum Pressure Resistance (psi) / Cure Time 10000 psi / 72 hrs. Substrate to be Sealed Metal Instant Low Pressure Seal Yes Available Sizes 50 ml, 250 ml A general-purpose instant sealer fomore...
Controlled Strength : Loxeal Anaerobic Thread Sealant are available in various grades. They are formulated for easy disassembly with normal hand tools even after years of service. For permanent sealing, specific formulation is available too.
Wide operating Temperature : Loxeal anaerobic Thread Sealant operate successfully within the wide temperature range of (-50°C to 230°C)
Ease of application : Loxeal Anaerobic Thread Sealant are very easy to apply. One can apply manually on site or using an automatic dosing system in an online assembly setting. No special skill is needed to use Loxeal Anaerobic Thread Sealant.
Cost : Loxeal Anaerobic Thread Sealant offers lowest application cost per joint over its lifetime Vs. any of the other pipe sealing methods.
Non Contamination : Loxeal Anaerobic Thread Sealant do not contaminate the fluid. Unlike PTFE tape that can clog or contaminate the system due to shredding or tear during assembly, Loxeal Anaerobic Thread Sealant are totally contamination free.
Pipe Positioning : Unlike PTFE tape and other conventional seals, Loxeal Anaerobic Thread Sealant allows the fittings to be positioned in any direction and angle. This eliminates excessive joint stress or loose fittings.
Anaerobic adhesives and anaerobic sealants cure in the absence of air or oxygen. They are designed for fastening and sealing applications in which a tight seal must be formed without light, heat or oxygen. Anaerobic adhesives are adhesives for metals, and they quickly cures at romore...
Cartell Chemical has been founded in 1994, Cartell Chemical is one of the leading manufacturers of Instant Adhesive (Cyanoacrylate Adhesive). Cartell Chemical has been operated in Taiwan. Cartell Chemicals has been in the business of Cyanoacrylate & Anaerobic Adhesives for the pamore...
Anaerobic adhesives are the type of adhesives that cure or harden in the presence of active metals and in the absence of oxygen. These adhesives are commonly malleable until enclosed in the absence of air between close fitting active metal surfaces. Anaerobic adhesives are commonmore...
A cylinder head gasket compound is a piece of material that is located between the cylinder head and the engine block inside an internal combustion engine. The purpose of the cylinder head gasket compound is to seal the cylinders to ensure maximum compression and prevent the leakmore...
It gives us immense pleasure to offer an immaculate range of 587 Blue High Performance Gasket Sealant , which is sourced from one of the foremost manufacturers of the India, Henkel. Our business associates make use of optimum quality chemical compounds at their advanced procmore...