nductive proximity sensors can be used for position sensing, speed measurement, counting & in conditions such as oily. dusty, corrosive environment. These inductive sensors applications are in Automobile, Steel Industries, CNC/NC machines, Conveyor systems, Packaging machines etc.

These 3 wire DC sensors are with NPN or PNP transistorised output and the load is connected in parallel.

Inductive sensor with analog output works in similar way as standard 3 wire DC Inductive Sensors. When a metal target comes in vicinity of the sensor, energy is drawn from the oscillator. This energy loss is in proportional with thedistance between sensor and the target ; which is converted in analog signal.

The analog signalis made linear and then amplified to give 0-10 Voutput.

These are analogue output switches called NAMUR output switches. These are 2 wire DC switches consisting only the sensor part of the total circuit. Due to their low current and voltage, these switches are most suitable in explosive or hazardous areas, when used with switching amplifier confirming to DIN 19234. The Low impedence of the switch is virtually immune to interface pick-up on the lead connecting to its amplifier. The switching can also be obtained through interface circuit or custom microprocessor besides switching amplifier. Besides its application in the hazardous areas, these can be used in normal environment where in space is the criteria. In such cases the amplifier unit can be kept in control panel and signals can be used led to it through a long cable.

nductive proximity sensors can be used for position sensing, speed measurement, counting & in conditions such as oily. dusty, corrosive environment. These inductive sensors applications are in Automobile, Steel Industries, CNC/NC machines, Conveyor systems, Packaging machines etc.

These 3 wire DC sensors are with NPN or PNP transistorised output and the load is connected in parallel.

Inductive sensor with analog output works in similar way as standard 3 wire DC Inductive Sensors. When a metal target comes in vicinity of the sensor, energy is drawn from the oscillator. This energy loss is in proportional with thedistance between sensor and the target ; which is converted in analog signal.

The analog signalis made linear and then amplified to give 0-10 Voutput.

These are analogue output switches called NAMUR output switches. These are 2 wire DC switches consisting only the sensor part of the total circuit. Due to their low current and voltage, these switches are most suitable in explosive or hazardous areas, when used with switching amplifier confirming to DIN 19234. The Low impedence of the switch is virtually immune to interface pick-up on the lead connecting to its amplifier. The switching can also be obtained through interface circuit or custom microprocessor besides switching amplifier. Besides its application in the hazardous areas, these can be used in normal environment where in space is the criteria. In such cases the amplifier unit can be kept in control panel and signals can be used led to it through a long cable.