These power LEDs needs to drive on Constant Current for the best performance in terms of continuous operation with constant Lumens.All protections are available like short circuit , over load , over temp etc.

LED Make : EDISON - 2835 - 0.2 W Light Color Temperature : W-6500K, NW-4000K, WW-3000K Lumens Output : White - 120 lm/W CRI > 80 Driver Efficiency : Typically 85% Driver P.F. : Typically 0.95 Beam Angle : 120 IP Rating : IP 20 Housing : Aluminium Die-Cast

Photoelectric Sensor works on the principle of modulated Infra-Red rays. These sensors can sense any opaque, semi-transparent objects which comes in its sensing range. Photoelectric Sensors have large operating distance. These are mainly divided into : Diffused Beam Sensor, Through Beam Sensor with Amplifier Unit, Through Beam Sensor with Built in Amplifier, Retro-Reflective Sensors.

Length counter provides a very cost - effective and reliable solution to many complex counting requirement. Potential free contacts from limit switch, micro switch.

Proximon Controls, the name synonymous with the quality automation components in industry today, like proximity sensors, photoelectric sensors, colour mark detector, encoders, and counters; offers an exhaustive range of power supplies. the MARATHON series. Marathon series of Switch Mode Power Supplies are designed with unique state of the art current mode PWM technology to obtain precise regulated output voltage at rated power. These Switch Mode Power Supplies are specially designed to work in harsh industrial environment, specifically for use in Indian power line conditions.Due to its exhaustive range, these Marathon series SMPS are in great demand in wide spectrum of industries like Instrumentation, Office Automation, Telecom, Medical Electronics, Railways, Fire Alarm Systems, Control Panels, Research Institute, Process industries, Engineering Industries etc.

1. Features

   High efficiency.High reliability.Low temperature riseBuilt in EMI filterLow output ripple, noiseCompact size, light weightRugged heavy duty enclosureShort Circuit protection, Overload / Over voltage protection100% Full load burn-in testedOver Temperature ProtectionParallel /Redundancy operation is possible

1. PROXIMON offers SMPS based LED Drivers to drive High Power LEDs.
   Today is world of Power LEDs in Lighting Industry due to it's long life and energy saving parameters. These power LEDs needs to drive on Constant Current for the best performance in terms of continuous operation with constant Lumens. Hence , constant current LED Drivers are BACK BONE of Power LEDs.

2. The unique features of PROXIMON's LED Driver are as follows

   All protections are available like short circuit , over load , over temp etc. Low No load voltage ( within the range ) , thus making suitable to use multiple LEDs safely.I/p & O/p are isolated.Power device is of high rating , hence completely reliable ( 24h X 7days a week )I/p & O/p capacitor are of higher capacity , hence low ripple and very good line & load regulation.
   Typical application areas for these Power LEDS are Malls , Offices , Subways, Commercial spaces, Hotels, Supermarkets , Highways etc.

Digital Forward/Reverse Controllers are with built in Production Counter & Speed Indicator makes these Controllers most cost effective. Available with us is an extensive range of Digital Forward/Reverse Controllers that are acknowledged for their attributes of flawless advance design and perfection in functionality. These qualitative forward controllers come with built in Production Counter & Speed Indicator, that make these controllers cost effective.

SPECIFICATIONS :Counting modes

• Up counting
• Down counting
• Quadrature counting
• Bi-directional counting

Display

7-digit, seven segment LED display (10mm height)

• Counter/Totaliser/Batch: 7- digit display
• Rate : 5- digit display
• RPM : 6- digit display

Range

• Counter/Totaliser:Selectable least count 0.000001, 0.00001, 0.0001, 0.001, 0.01, 0.1, 1
• Rate: Rate per minute (RM) / Rate per hour (RH) user selectable. (minimum frequency for Rate mode is 10 Pulses/minute)
• RPM: 10 RPM to 360000 RPM

Set points

• 3 user programmable set points.
• SET1 , SET2 :Dedicated for COUNTER mode.
• SET3 : User programmable for any one of COUNTER / TOTALISER /BATCH / RPM.

Relay operating mode

• Relay ON mode
• Relay OFF mode
• Pulse time mode a) Time pulse repeat modeb) Auto-reset mode

Count inputs

• Voltage pulse : 8 to 30 V DC amplitude from proximity switch, encoder.
• Potential free contacts from limit switch, micro switch.

Input frequency

• 0 to 6 KHZ: In up / down mode
• 0 to 3 KHZ: In quadrature mode / bi-directional mode.

Sensor supply

• 12 V DC, 60mA (+/- 10 %)

Scale factor

• Programmable
• scale factor = X x 10^Y X = From 0.000001 to 9.999999Y = 0, 1, 2, -1, -2, -3, -4, -5

Reset input

• Manual / Front panel reset: with enable / disable facility
• Remote/ Back panel / Electrical reset: User selectable( minimum time for remote reset is 10 ms. )
• Reset through programming mode: User selectable

Relay outputs

• Three Relays ( one relay for each set point )
• Relay1/ Relay2 for set1/set2 operation ( COUNTER )
• Relay3 for set3 ( COUNTER / TOTALISER / BATCH / RPM ) Programmable
• Relay ratings: Rated for 5 Amp at 230 V AC

Memory retention

• Upto 10 years

Protection

• Parametersa) Password protectedb) Hardware protected (Dip switch setting)
• Set points a) Software protected (Through program configuration i.e. SdF 3.)

Supply

• 230 V AC (+/- 10%)

Mounting

• Panel mounting

Weight

• approximately 580 gms

Operating temperature

• 0 to 50 C

Relative humidity

• 10 - 95% non-condensing

Overall dimensions

• (All dimensions are in mm.)

1. This consist of two devices; a light emitter and a light receiver. These two devices are kept apart facing each other. The Gallium-Aluminium-Arsenide-Luminescent diode integrated in the transmitter sends pulses of light in the infra-red range which are invisible to the human eye. The receiver opposite to the transmitter receive these rays. Sensing is achieved when these rays are interrupted by the object.

2. ADVANTAGES

   - Large sensing distance is possible as emitter and receiver are kept opposite to each other. - Suitable for precise detection of large as well as small objects. - Repeatability and indexing precision are not impaired even if the object surface or background is reflecting.

3. FIELD OF APPLICATION

   Through Beam Sensors are used for sensing semitransparent opaque objects such as Glass/Plastic Bottle, Sliver breakage detection, Paper breakage detection, Door opening/closing etc.

These power LEDs needs to drive on Constant Current for the best performance in terms of continuous operation with constant Lumens.All protections are available like short circuit , over load , over temp etc.

LED Make : EDISON - 2835 - 0.2 W Light Color Temperature : W-6500K, NW-4000K, WW-3000K Lumens Output : White - 120 lm/W CRI > 80 Driver Efficiency : Typically 85% Driver P.F. : Typically 0.95 Beam Angle : 120 IP Rating : IP 20 Housing : Aluminium Die-Cast

Photoelectric Sensor works on the principle of modulated Infra-Red rays. These sensors can sense any opaque, semi-transparent objects which comes in its sensing range. Photoelectric Sensors have large operating distance. These are mainly divided into : Diffused Beam Sensor, Through Beam Sensor with Amplifier Unit, Through Beam Sensor with Built in Amplifier, Retro-Reflective Sensors.

Length counter provides a very cost - effective and reliable solution to many complex counting requirement. Potential free contacts from limit switch, micro switch.

Proximon Controls, the name synonymous with the quality automation components in industry today, like proximity sensors, photoelectric sensors, colour mark detector, encoders, and counters; offers an exhaustive range of power supplies. the MARATHON series. Marathon series of Switch Mode Power Supplies are designed with unique state of the art current mode PWM technology to obtain precise regulated output voltage at rated power. These Switch Mode Power Supplies are specially designed to work in harsh industrial environment, specifically for use in Indian power line conditions.Due to its exhaustive range, these Marathon series SMPS are in great demand in wide spectrum of industries like Instrumentation, Office Automation, Telecom, Medical Electronics, Railways, Fire Alarm Systems, Control Panels, Research Institute, Process industries, Engineering Industries etc.

1. Features

   High efficiency.High reliability.Low temperature riseBuilt in EMI filterLow output ripple, noiseCompact size, light weightRugged heavy duty enclosureShort Circuit protection, Overload / Over voltage protection100% Full load burn-in testedOver Temperature ProtectionParallel /Redundancy operation is possible

1. PROXIMON offers SMPS based LED Drivers to drive High Power LEDs.
   Today is world of Power LEDs in Lighting Industry due to it's long life and energy saving parameters. These power LEDs needs to drive on Constant Current for the best performance in terms of continuous operation with constant Lumens. Hence , constant current LED Drivers are BACK BONE of Power LEDs.

2. The unique features of PROXIMON's LED Driver are as follows

   All protections are available like short circuit , over load , over temp etc. Low No load voltage ( within the range ) , thus making suitable to use multiple LEDs safely.I/p & O/p are isolated.Power device is of high rating , hence completely reliable ( 24h X 7days a week )I/p & O/p capacitor are of higher capacity , hence low ripple and very good line & load regulation.
   Typical application areas for these Power LEDS are Malls , Offices , Subways, Commercial spaces, Hotels, Supermarkets , Highways etc.

Digital Forward/Reverse Controllers are with built in Production Counter & Speed Indicator makes these Controllers most cost effective. Available with us is an extensive range of Digital Forward/Reverse Controllers that are acknowledged for their attributes of flawless advance design and perfection in functionality. These qualitative forward controllers come with built in Production Counter & Speed Indicator, that make these controllers cost effective.

SPECIFICATIONS :Counting modes

• Up counting
• Down counting
• Quadrature counting
• Bi-directional counting

Display

7-digit, seven segment LED display (10mm height)

• Counter/Totaliser/Batch: 7- digit display
• Rate : 5- digit display
• RPM : 6- digit display

Range

• Counter/Totaliser:Selectable least count 0.000001, 0.00001, 0.0001, 0.001, 0.01, 0.1, 1
• Rate: Rate per minute (RM) / Rate per hour (RH) user selectable. (minimum frequency for Rate mode is 10 Pulses/minute)
• RPM: 10 RPM to 360000 RPM

Set points

• 3 user programmable set points.
• SET1 , SET2 :Dedicated for COUNTER mode.
• SET3 : User programmable for any one of COUNTER / TOTALISER /BATCH / RPM.

Relay operating mode

• Relay ON mode
• Relay OFF mode
• Pulse time mode a) Time pulse repeat modeb) Auto-reset mode

Count inputs

• Voltage pulse : 8 to 30 V DC amplitude from proximity switch, encoder.
• Potential free contacts from limit switch, micro switch.

Input frequency

• 0 to 6 KHZ: In up / down mode
• 0 to 3 KHZ: In quadrature mode / bi-directional mode.

Sensor supply

• 12 V DC, 60mA (+/- 10 %)

Scale factor

• Programmable
• scale factor = X x 10^Y X = From 0.000001 to 9.999999Y = 0, 1, 2, -1, -2, -3, -4, -5

Reset input

• Manual / Front panel reset: with enable / disable facility
• Remote/ Back panel / Electrical reset: User selectable( minimum time for remote reset is 10 ms. )
• Reset through programming mode: User selectable

Relay outputs

• Three Relays ( one relay for each set point )
• Relay1/ Relay2 for set1/set2 operation ( COUNTER )
• Relay3 for set3 ( COUNTER / TOTALISER / BATCH / RPM ) Programmable
• Relay ratings: Rated for 5 Amp at 230 V AC

Memory retention

• Upto 10 years

Protection

• Parametersa) Password protectedb) Hardware protected (Dip switch setting)
• Set points a) Software protected (Through program configuration i.e. SdF 3.)

Supply

• 230 V AC (+/- 10%)

Mounting

• Panel mounting

Weight

• approximately 580 gms

Operating temperature

• 0 to 50 C

Relative humidity

• 10 - 95% non-condensing

Overall dimensions

• (All dimensions are in mm.)

1. This consist of two devices; a light emitter and a light receiver. These two devices are kept apart facing each other. The Gallium-Aluminium-Arsenide-Luminescent diode integrated in the transmitter sends pulses of light in the infra-red range which are invisible to the human eye. The receiver opposite to the transmitter receive these rays. Sensing is achieved when these rays are interrupted by the object.

2. ADVANTAGES

   - Large sensing distance is possible as emitter and receiver are kept opposite to each other. - Suitable for precise detection of large as well as small objects. - Repeatability and indexing precision are not impaired even if the object surface or background is reflecting.

3. FIELD OF APPLICATION

   Through Beam Sensors are used for sensing semitransparent opaque objects such as Glass/Plastic Bottle, Sliver breakage detection, Paper breakage detection, Door opening/closing etc.