Our Products
Pharmaceutical Machines
2 Products availableIndustrial Cleaning Machine
1 Products availableMilling Machines
1 Products availablePowder Mixers
1 Products availableDryers
1 Products availablePunches
1 Products availableCupboard
1 Products availableGrinding Machine
1 Products availableOur Complete range of products are Coating Pan, communiting mill, Dedusting Machine, Granulator Machine and Oscilating Granulator.
Salient Features
In compliance with cGMP standard.Higher output suitable for large batch production.Force feeder attachment is a standard features, so higher weight consistency of tablets.Inter locked guards, for safety.Internal helical gear ring and pinion drive for smooth running of machine.Easily removable bottom driven rotary force feeders.ACVF drive for main motor & also ACVF drive for feeder motors.Electromagnetic clutch.All the tablet parameters can be set from outside of the tableting zone.Heavy duty advance design of overload compression spring system, eliminates hydraulic cylinders & accumulator cylinder.No maintenance of hydraulic cylinder & accumulator cylinder.Continuous lubrication pump for turret helical gear & pinion.One shot lubrication pump is provided for lower roll pins.Lower punch seals in turret.3 types of filling cams.Upper punch penetration.Round hopper with butter fly valve.Upper & lower pressure rolls fitted with ball bearings.Separate electrical panel on front of machine, which facilitates easy cleaning of machine.
Additionl Optional Features
1. Three piece turret with stainless steel 304/316 die-table.2. Powder level monitoring device at feed hoppers.3. Spray lubrication system for effervescent table production.4. Gravity feeing system.5. Bi-layer tablet facility.6. Plc control system with touch screen display.
Technical Specification
Machine type | Proton-45D | Proton-61B | Proton-69BB | Proton-75BB |
---|---|---|---|---|
Number of Station | 37 | 45 | 55 | 61 |
Type of Tooling | 'D' | 'B' | 'BB' | 'BB' |
Output-Tablets/Hr.* Maximum | 222000 | 270000 | 333000 | 366000 |
Max. Operating Pressure-Main(kN) | 100 | 65 | 65 | 65 |
Max. Tablet diameter | 25 mm | 16 mm | 11 mm | 11 mm |
Max. Depth Of Fill | 20 mm | 17 mm | 17 mm | 17 mm |
Upper Punch entry Main | 3 to 6 | |||
Power Total(kW/hp) | 6.70/9.00 | |||
main Motor(kW/hp) | 5.50/7.50 | |||
Force Feeder Motor(kW/hp) | 0.18/0.25 | |||
Electrical Supply | 415V / 3 Phase / 50 Hz | |||
Overall Dimensions LxWxH(mm) | 1440x1430x1920 | |||
Net Weight (Kg) | 2500 | |||
Case Dimensions LxWxH(mm) | 1670x1830x2150 | |||
Gross Weight(kg) | 2835 |
Salient Features
Square GMP model.Machine is having heavy duty C.I. body & C.I. middle plate.Easy and more thorough cleaning.Excellent and operator friendly material feeding System.Upper guards of transparent acrylic material.Electronic /Digital. Tablet cum RPM counter.Turret of special grade SG Iron casting.Lower punch wiper seal to prevent lower punch jamming.Aluminum turret guards.Higher turret speed 17 to 42 RPM.Phosphorous bronze bush provided inside the turret hole.Imported needle roller bearing provided at the bottom of turret.Cam tracks & pressure rolls made out of alloy steel.Worm is made of phosphorous bronze material.Upper punch penetration system.Effective dust extraction nozzle.Inter lock switches to all guards.Variable speed pulley.One shot lubrication system.Double sided lifting cams.Anti vibration mounts.Overload pressure release system.Reverse direction motion protection is provided to avoid major accident.Available with AC variable drive for main motor (Optional)Pre-Compression arrangement. (Optional)Available with force feeding attachment (Optional)Available with SS 316 middle plate in turret. (Optional)Available with electroless nicked pating on turret.(Optional)
Technical Specification
Machine type | Proton-12 Bolus | Proton-16D | Proton-20D |
---|---|---|---|
Number of Station | 12 Stn | 16 Stn | 20 Stn |
Type of Tooling Punch | Special | 'D' | 'D' |
Output-Tablets per hour | 15,840-8,640 | 13,440-40,320 | 16,800-50,400 |
Max. Operating | 12 Tons | 10 Tons | 10 Tons |
Max. Tablet diameter | 40 mm | 25 mm | 25 mm |
Max. Depth Of Fill | 30 mm | 20.5 mm | 20.5 mm |
Upper Punch entry Penetration | 1.5-8mm | 1.5-8mm | 1.5-8 mm |
main Electric Motor(kW/hp) | 3 H.P.,950 RPM, 415 Volts, 50 Hz | 3 H.P 1440 PM.,4515 V., 3 Phase, 50 Hz. | 3 H.P 1440 PM.,4515 V., 3 Phase, 50 Hz. |
Overall Dimensions (mm) | 980x1020x1820 | 980x1020x1820 | 980x1020x1820 |
Net Weight (KGS) | 1200 | 1100 | 1100 |
100 KN with Pre-Compressin Force. Also Available In Combination Tooling Of D, B & BB With Bi-layer Tablet Compression Facility
Salient FeaturesIn compliance with cGMP Standard.Available with Two Layer Tablet compression Facility.Maximum Speed of Turret up to 70 RPM.100 KN Main Compression Force.100 KN Pre-compression Force.Turret is driven by centrally fitted oil emerged gear box.Upper Punch penetration is provided as a standard features.Electronic Digital Tablet Counter cum RPM indicator.Interlock Switches to all upper guards.Reverse direction motion protection is provided to avoid accident.AC Variable Frequency drive for Main Motor.The machine is available in Combination. Tooling of D, B & BB
Optional FeaturesSS 316 Middle Plate in Turret.Electro Less nickel Plating on Turret.Force Feeder Attachment.Two Layer Tablet Compression Facility.PLC & HMI.
Technical Specification
Machine type | Next Gen-1-16D | Next Gen-1-20D | Next Gen-1-23B | Next Gen-1-26B |
---|---|---|---|---|
Number of Station | 16 | 20 | 23 | 26 |
Type of Tooling | 'D' | 'D' | 'B' | 'B' |
Output/Hour(Max) (Single Layer) | 67200 | 84000 | 96600 | 109200 |
Main Compression Force | 100 KN | 100 KN | 65 KN | 65 KN |
Pre Compression Force | 100 KN | 100 KN | 65 KN | 65 KN |
Maximum Tablet Dia | 25 mm | 25 mm | 16 mm | 16 mm |
Maximum Depth Oof Fill | 20 mm | 20 mm | 17.5 mm | 17.5 mm |
main Electric Motor | 5 H.P.,1440 RPM,415 V, 3 Phase | |||
Force Feeder Electric Motor | 0.25 H.P., 1440 RPM,415 V,3 Phase | |||
Overall Dimensions (mm) | 680x830x1550 | |||
Net Weight (Kg) | 900 Kgs |
Salient Features
Square GMP model.Machine is having heavy duty C.I. body & C.I.middle plate.Easy and more through cleaning.Excellent and operator friendly material feeding system.Lower guards of polished stainless steel.Upper guards of transparent acrylic material.Digital tablet cum RPM counter.Turret of special grade S.G. casting.Aluminum turret guards.Higher turret speed upto 40 RPM.Phosphorous bronze bush provided inside the turret hole.Imported needle roller beaning provided at the bottom of turret.Cam tracks & pressure rolls made out of alloy steel.Worm is made of phosphorous bronze material.Upper punch penetration system.Effective dust extraction nozzles.Interlock to all guards.Variable speed pulley.One shot lubrication system.Double sided lifting cams.Anti vibration mounts.Overload pressure release system.Reverse direction motion protection is provided to avoid major accident.Available with intermittent auto lubrication pump.(optional)Available with force feeding attachment. (optional)Also available with SS 316 middle plate in turret.Also available with electroless nickd plating turret.Machine can be equipped to compress two-layered tables. (optional)Also available with AC variable drive for main motor. (optional)Also available with front control. All parameters can be set outside of machin
q
Technical Specification
Machine type | Proton-27D | Proton-35B | Proton-45BB | |
---|---|---|---|---|
Number of Station | 27 Stn | 35 Stn | 45 Stn | |
Type of Tooling | 'D' | 'B' | 'BB' | |
Output-Tablets/Hr. | 54,00-1,29,000 | 70,000-1,68,000 | 90,000-2,16,000 | |
Max. Operating Pressure | 10 Tons | 6.5 Tons | 6.5 Tons | |
Max. Tablet diameter | 25 mm | 16 mm | 11 mm | |
Max. Depth Of Fill | 20 mm | 17 mm | 17.5 mm | |
Upper Punch entry Penetration | 1.5-8mm | 1.5-8mm | 1.5-8 mm | |
Turret RPM | 40 RPM | 40 RPM | 40 RPM | |
main Electric Motor(kW/hp) | 5 HP, 3 Phase, 1440 RPM, 415 V., 50 Hz | |||
Overall Dimensions (mm) | 1790 mmx1000 mmx1040 mm | |||
Net Weight (KGS) | 1400 |