Our Product / Services
Testing Equipments
2 Products availableBakery & Dairy Machine
2 Products availableProcess Controllers
2 Products availableBag Packaging Machines
1 Products availableFood Testing Equipment
1 Products availableChillers
1 Products availableFarm Management Service
1 Services availableLeading Manufacturer, Supplier & Retailer of GM9907 Bagging Controller, GM8804C-2 Bagging Controller, GM8804C-D Bagging Controller, GM8802S-P Bagging Controller and GM8806A-BZ Bagging Controller.
GM9907 is a general-purpose weighing controller that will take care of all your packaging needs. It controls the automatic packing machines, delivering precise results. The smart and sturdy built of this bagging system ensure that it can function effectively even in the stressful industrial environments. This packaging controller is ideal for feed, grain, seed, and chemical industries.
GM9907-LD:It is a general-purpose weighing controller that can control the dual hopper application. It offers the touch screen function for better use.
GM9907-L2:It is a single hopper packaging controller that comes with the touch screen function. This controller is available with five different software for different functionalities that include with/without hopper, bulk scale, valve port, and PLC.
Key Features
Product Highlights
Brochure
Specification
Mode | GM9907 |
---|---|
Power Supply | DC24V |
Operating Temperature | -10°C to 40°C |
Maximum Humidity | 90% R.H without dew |
Test Standard | Class III 6000e, 1μV/d |
Power Consume | About 15W |
IP Leve | Front panel IP65 |
Type | 24-bit Sigma-Delta |
Conversion Rate | 120/240/480/960 SPS |
Non-Linear | 0.01% F.S |
Gain Drifting | 10PPM/’C |
Minimum Sensitivity | 0.05 μV/d |
Analog Input Range | 0.02mV -15mV |
Display Accuracy | 1/100000 |
Power Source for Load Cell | DC5V 125mA (MAX) |
Input Resistance | 10MΩ |
Zero Point Adjustment Range | 0.02-8mV (When the transducer is 2mV/V.) |
GM8804C-2 is a bagging or packaging controller that incorporates several patented key technologies. This controller controls with a material hopper or without material hopper application. The automatic three-speed functioning ensures an excellent balance between speed and precision. This bagging controller is ideal for grain, chemical, and fertilizer industries.
Key Features
Product Highlights
Brochure
Specification
INDICATOR POWER | |
---|---|
Power Supply | 90V~260V AC 50Hz(or 60Hz)±2% |
Power Consume | 15W |
A/D CONVERTER | |
Type | 24-bit Delta-Sigma |
Analogue input range | 0.2mV to 37mV |
Linearity | <0.01%FS |
Gain Drifting | 10PPM/℃ |
Minimum Sensitivity | 0.5 µ V/d |
Conversion Rate | 120/s |
Display Accuracy | 1 / 30,000 |
DISPLAY & KEYBOARD | |
Main Display | 6 digits, 7 segments, VFD |
Sub Display | 3 digits, 7 segments, VFD |
Keyboard | 16 buttons with beeping feedback |
Status Indicators | (18 VFD indicator) ZERO, STAB, RUN, SUM, OVER, UNDER, SP1, SP2, SP3, DISC, NZ, FILL, HILIM, HI, GO, LO, LOLIM, HOLD |
LED Status | Gross, Net, Tare, Pack |
CALIBRATION & WEIGHING FUNCTIONS | |
Calibration | By test weight or by electronic calibration |
Digital Filter | Multiple FIR filters with 9 selectable levels |
Weighing Functions | zero, zero tracking, auto-zero at power |
ENVIRONMENTAL | |
Operating Temperature | -10℃ to 40℃ |
Storage Temperature | -25℃ to 70℃ |
Relative Humidity | 90% R.H without dew |
IP Level | Front panel IP 65 |
LOAD CELLS | |
Excitation | 12V |
Load Cells | Drives 8pcs Load Cells 350Ω |
MECHANICAL DATA | |
Dimensions & Weight | 165×181×98 mm (L×W×H) weight approx. 2.5kgs |
Standard Mounting | Panel Mount |
Certification | CE |
Enclosure | ABS front panel, cast aluminium body |
DIGITAL INPUT | |
Input Number | 8 |
Input Functions | (12 Self-defined functions) Start, Stop, Zero, Clear Alarm, Change Recipe, Clip/Loose bag, Manual discharge, Manual fine feeding, Print, Key locker, Hi-limit, low-Limit |
DIGITAL OUTPUT | |
Output Number | 12 |
Output Functions | (15 Self-defined functions) Run, Stop, High-feeding, Middle-feeding, Fine-feeding, Fixing-value, Over, Alarm, Clip bag, Punching bag, Discharge, Near zero, Supply material, Batch complete, Material short |
PRINT FUNCTION | |
RS232 Port | |
UART RS232/RS485 INTERFACE | |
BUS | Standard Modbus RTU |
CONT | Sending Continuous (General Measure Protocol) |
READ | Read and Response mode (General Measure Protocol) |
PACKING FUNCTION | |
Feeding | 3 Feeding Speed, Jog-feeding supported |
Packing Mode | With Bin mode, Without Bin mode |
Recipe | 20 recipes |
Speed | 10-16 Packs/min up to 50Kg/pack |
Accuracy | ≤0.5% |
Extra | Free fall self-adjust, Punching bag functionBatching packing |
GM8804CD is a revolutionary dual-hopper packaging controller that is also the first of its kind in the world. This packaging controller is developed with key technologies that promise high performance, reliability and accuracy. It can be easily integrated and is a value-adding solution for applications where dual hoppers are needed on a single machine.
Key Features
Product Highlights
Specification
INDICATOR POWER | |
---|---|
Power Supply | 90V~260V AC 50Hz(or 60Hz)±2% |
Power Consumption | 25W |
A/D CONVERTER | |
Type | 24-bit Delta-Sigma |
Analogue input range | 0.2mV to 37mV or 0.2mV to 27mV |
Linearity | <0.01%FS |
Gain Drifting | 10PPM/℃ |
Minimum Sensitivity | 0.5 µ V/d |
Conversion Rate | 120/s |
Display Accuracy | 1 / 30,000 |
DISPLAY & KEYBOARD | |
Main Display 1 | 6 digits, 7 segments, VFD |
Main Display 2 | 6 digits, 7 segments, VFD |
Extra Sub-Display | 1 digit, 7 segments, VFD |
Keyboard | 16 buttons with beeping feedback |
Status Indicators | (8 indicators each channel) SP1, SP2, SP3, COMP, DISC, OVER ,NZ, ZERO. (5 independent LED indicators) RUN, PACK, SUM, FILL, A+B |
CALIBRATION & WEIGHING FUNCTIONS | |
Calibration | By test weight or by electronic calibration |
Digital Filter | Multiple FIR filter with 9 selectable levels |
Weighing Functions | zero, zero tracking, auto-zero at power |
ENVIRONMENTAL | |
Operating Temperature | -10℃ to 40℃ |
Storage Temperature | -25℃ to 70℃ |
Relative Humidity | 90% R.H without dew |
IP Level | Front panel IP 65 |
LOAD CELLS | |
Excitation | 12V |
Load Cells | Drives 8pcs Load Cells 350Ω |
MECHANICAL DATA | |
Dimensions & Weight | 231×257×97 mm (L×W×H) weight approx. 4kgs |
Standard Mounting | Panel Mount |
Certification | CE |
Enclosure | ABS front panel, cast aluminum body |
DIGITAL INPUT | |
Input Number | 12 |
Input Functions | (15 Self-defined functions) Start, Stop, A-Zero, B-Zero, Clear Alarm, Change Recipe, Clip/Loose bag, A-Manual discharge, B-Manual discharge, Manual fine feeding A, Manual fine feeding B ,Print, Key locker, Hi-limit, low-Limit |
DIGITAL OUTPUT | |
Output Number | 16 |
Output Functions | (21 Self-defined functions) Run, A-High-feeding, A-Moderate-feeding, A-Fine-feeding, A-Fixing-value, A-Discharge, B-High-feeding, B-Moderate-feeding, B-Fine-feeding, B-Fixing-value, B-Discharge, Over, Alarm, Clip bag, Punching bag, Discharge, Supply material, Batch complete, Material short, A-Near-Zero, B-Near-Zero |
PRINT FUNCTION | |
RS232 Port | |
UART RS232/RS485 INTERFACE | |
BUS | Standard Modbus RTU |
CONT | Sending Continuous (General Measure Protocol) |
READ | Read and Response mode (General Measure Protocol) |
PACKING FUNCTION | |
Feeding | 3 Feeding Speed, Jog-feeding supported |
Working mode | A,B channel independent mode, A,B channel combine mode |
Packing Mode | With Bin mode, Without Bin mode |
Recipe | 10 recipes |
Accuracy | ≤0.5% |
Extra | Free fall self-adjust, Punching bag function |
GM8802S-P is a bulk accumulator controller is a weighing control machine that is specifically designed for discontinuous automatic accumulator scale. Offering a lot of value, this weighing controller has a compact size, offers high accuracy, and is equipped with simple functions. Anyone can easily operate it without the need for any support. It is ideal for usage across industries like chemical, food, and other industries that require bulk material metering equipment.
Key Features
Specification
The power supply | DC24V plus or minus 5% |
---|---|
Power consumption | 10 w. |
Working temperature | – 10 ~ 40 ℃ |
Maximum humidity | 90%RH(no condensation) |
Display unit | 1.3 inch OLED screen |
Physical size | 110 * 89 * 60 (mm) |
Digital output | Low-level output,6 nos (run, stop, Quickly add, Slowly add, Constant value, discharge) |
Digital input | low-level signal is valid,4 nos(Start, stop, suspension, reset) |
GM8806A-BZ is a highly versatile bagging controller that offers multiple functions. The robust controllers of this bagging system connect the functions of basic weighing, batching, and packaging. It comes in a compact and robust casing that can withstand the extreme industrial environments. Offering excellent flexibility, there are several options for different function modes. It will help in minimizing your inventory, while at the same time it will offer unmatched performance and flexibility.
Key Features
Product Highlights
Specification
INDICATOR POWER | |
---|---|
Power Supply | 90V~260V AC 50Hz(or 60Hz)±2% |
Power Consume | 10W |
A/D CONVERTER | |
Type | 24-bit Delta-Sigma |
Analogue input range | 0.02mV to 10mV |
Linearity | <0.01%FS |
Gain Drifting | 10PPM/℃ |
Minimum Sensitivity | 0.01 μ V/d |
Conversion Rate | 120/s |
Display Accuracy | 1 / 30,000 |
DISPLAY & KEYBOARD | |
Main Display 1 | 6 digits, 7 segments, LED |
Sub Display 2 | 6 digits, 7 segments, LED |
Extra Display | 1 digits, 7 segments, LED |
Keyboard | 4 membrane switches with beeping feedback |
Status Indicator | (6 indicator) RUN, SP1, SP2, DISC, ZERO, STAB |
CALIBRATION & WEIGHING FUNCTIONS | |
Calibration | By test weight or by electronic calibration |
Digital Filter | Multiple FIR filter with 9 selectable levels |
Weighing Functions | zero, zero tracking, auto-zero at power |
ENVIRONMENTAL | |
Operating Temperature | -10℃ to 40℃ |
Storage Temperature | -25℃ to 70℃ |
Relative Humidity | 90% R.H without dew |
IP Level | Front panel IP 65 |
LOAD CELLS | |
Excitation | 5V |
Load Cells | Drives 8pcs Load Cells 350Ω |
MECHANICAL DATA | |
Dimensions & Weight | 151×105×57 mm (L×W×H) weight approx. 550g |
Standard Mounting | Panel Mount |
Certification | CE |
Enclosure | ABS front panel, cast aluminium body |
DIGITAL INPUT | |
Input Number | 4 |
Input functions for batching | (11 Self-defined functions) Start, Stop, Zero, Clear Alarm, Change Recipe, Discharge, Key locker, Pause, Set tare, Clear Tare, Start/Stop |
Input functions for packaging mode | (19 Self-defined functions) Start, Stop, Zero, Clear alarm, Change Recipe, Clip/Loose bag, Discharge(Step Signal), Discharge (Pulse signal), Manual fine feed, Key locker, Hi-limit, Low-limit, Gate close, Bag Clipped, Pause, Start/Stop, Clear total, Feeding blocked |
DIGITAL OUTPUT | |
Output Number | 10 |
Output Meaning for batching | (17 Self-defined meanings) Run, Stop, Fast-feeding, Moderate-feeding, Fine-feeding, Material1, Material2, Material3, Material4, Fixing-value, Discharge, Over/Under, Batch complete, Near-Zero, Pause, Stable, Alarm. |
Input Meaning for packaging mode | (20 Self-defined meanings) Run, Stop, Pause, Fast-Feeding, Moderate-feeding, Fine-feeding, Fixing Value, Over, Under, Alarm, Clip bag, Punching bag, Discharge, Near zero, Supply, Batch complete, Material short, Stable, Feeding blocked, No feeding |
INSTRUMENT WITH ANALOGUE OUTPUT(OPTIONAL) | |
Type | Isolated 16-bit D/A converter |
Accuracy | 0 |
Voltage Output | 0-5V / 0-10V / -5-5V / -10-10V |
Current Output | 4-20mA / 0-20mA / 0-24mA |
UART RS232/RS485 INTERFACE | |
BUS | Standard Modbus RTU, Standard Modbus ASCII |
RS | General Measure Protocol |
PACKING MODE(SELECTABLE) | |
Feeding | 3 Feeding Speed, Jog-feeding supported |
Working Mode | With Bin mode, Without Bin mode |
Packaging Mode | Gross Packing, Net Packing |
Recipe | 40 |
Extra | Free fall self-adjust, Punching bag function |
BATCHING MODE(SELECTABLE) | |
Material | Support up to 4 materials |
Feeding | 3 Feeding Speed, Jog-feeding supported |
Recipe | 40 |
Extra | Freefall self-adjust, Punching bag function |
SAFETY | Run resume when re-power on |
MO4 is a versatile weighing controller that can control single or dual hopper application. It’s new and advanced algorithm simplifies the operation and enhances the working efficiency and accuracy. This bagging controller comes with a USB port and two serial communication ports that allow easy connection with other devices. It can be used for a wide variety of needs like bagging, bulk scale, loss-in-weight batching or feeding, etc. An advanced version of this bagging system, MO4-6, supports single or double nozzle liquid filling applications.
Key Features
Product Highlights
Brochure
Specification
Model | MO4 |
---|---|
Power Supply | AC90-260V 50Hz(or 60Hz) +2% |
Operating Temperature | -10°C to 40°C |
Maximum Humidity | 90% R.H without dew |
OIML Standard | OIML R76: Class III 6000 divis. 1μV/d |
Power Consume | About 15W |
IP Level | Front panel IP65 |
Type | 24-bit Sigma-Delta |
Conversion Rate | 120/240/480/960 SPS |
Non-Linear | 0.01% F.S |
Gain Drifting | 10PPM/°C |
Minimum Sensitivity | 0.02 μ V/d |
Analog Input Range | 0.02mV -15mV |
Display Accuracy | 1/100000 |
Power Source for Load Cell | DC5V 125mA (MAX) |
Input Resistance | 10MΩ |
Zero Point Adjustment Range | 0.02-8mV (When the transducer is 2mV/V.) |