Navi Mumbai, Maharashtra, India
Our Products
Gas Plants
2 Products availableDough Mixers
1 Products availableIndustrial Mixers
1 Products availableRoll Forming & Bending Machines
1 Products availableGrinding Mill
1 Products availablePharmaceutical Machines
1 Products availablePressure Filter
1 Products availableOil Plant And Extraction Machinery
1 Products availableWe offer a complete product range of Manual Jet Mill Micronizer
10 litres to 20, 000 litres
Application:To conduct various types of reactions multipurpose reaction assembly like esterification, etherification, nitration, alkalisation, hydrolysis, hydration, dehydration, sulphonation, reduction, oxidation under alkaline conditions, condensation, polymerisation etc. We are certified manufacturer, exporter and supplier of multipurpose reaction assemblies as per the clients requirements and need since 1990.
The unique design allows the following unit operations to be conducted efficiently. Solvent recovery, distillation, liquid-liquid extraction, phase separation, dissolution, de-emulsification, heating, cooling, blending, degassing, flash distillation etc.
Efficient condenser allows complete condensation of vapours and minimises losses. The subcooler, receiver and vapour trap facilitates recovery of all the material by distillation under reduced pressure. The limpet and the internal coil is provided for cooling as well as heating. The system is designed to facilitate conducting reactions under auto pressure / reduced pressure / under inert atmosphere under subzero temperature as well as temperatures up to 300 C.
10 litres to 10000 litres
Application:We deliver the quality based ball mill, is a key equipment for regrinding. Promas Engineers is well known name in ball mills manufacturers in India. We are manufacturer, supplier and exporter of ball mills according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world. It is widely used for the cement, the silicate product, new type building material, fire-proof material, chemical fertilizer, black and non-ferrous metal, glass, ceramics and etc.
Our ball mill can grind ore or other materials that can be grinned either by wet process or by dry process.
Working PrincipleBall mill is an efficient machine for fine powder grinding and key equipment for grinding after the crushing are two ways of ball mill grinding: the dry way and the wet way. It is used to grind many kinds of mineral ores and other materials, or to select mine. Ball mill is also widely used in the manufacturing industries, such as Biotechnology, Cement, Silicate, Fertilizer, Ferrous Metal, Non-ferrous Metal and Glass Ceramics and can be used for the dry and wet grinding for all kinds of ores and other grindable materials.
5 kg to 1000 kg
M.O.CSS 304/316
Application:Rapid Mixer Granulator is an ideal mixer for pharmaceutical, chemicals and food products, including aqueous and solvent granulation, wax granulation, dry mixing and wet granulation. Promas Engineers is well known organization for manufacturer, supplier and exporter of rapid mixer granulator according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.
Spinning of material closed to the bottom of the mixing bowl and chopper blade sets the entire mixing in whirling and tumbling motion. Chopper blade assembly breaks the lumps formed during mixing. Different type of chopper blades provided for various applications.
Salient FeaturesGMP Model with SS 316 contact parts. Electrical control panel consisting of switch gears, fuses, motor starter, push buttons, ammeters, indicating lamps, pressure switch etc. all enclosed in stainless steel sheet metal panel and mini PLC that shows operation in progress with MIMIC. Granulating blade horizontally rotating at high speed for intense mixing. Mixing blades 4 Numbers for intense mixing. Pneumatically operated bottom side discharge valve. Complete unit is mounted on rigid structure covered by S S Sheet.
Capacity:
3 Ltrs. to 2000 Ltrs.
Application:
Promas Engineers offers sigma mixers are ideal heavy duty mixer which can be used in Explosive / Chemical as well as Food processing industry. We are manufacturer, supplier and exporter of sigma mixer according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.
Working Principle Sigma Mixers
The bowl is made of heavy steel plate making it a rugged heat proof unit. This is especially useful for bulky material and additional thinning prior to discharge. Tangential blades are supplied with differential speeds. Heavy duty machine cut spur gears are provided. Spherical type bearings are provided at both the ends to suit both radial and thrust load. Gland type shaft seals are fitted at both the ends for easy maintenance.
Bowl is provided with jacket for temperature control and adoptable for cold water or brine or hot water, steam etc. Mixers can be designed for vacuum operations. Sanitary construction is provided for food and pharmaceutical procedures.
Manually operated discharge system is provided for lab models and motorised discharge system is provided for plant models.
3 litres to 2500 litres
Application(For dry & Dough Mixing):Planetary mixers are an ideal mixer for the products of different viscosities, densities, shapes & proportions. The major uses include the production of latexes, dispersion & micro dispersion of Chemicals, Explosive & agricultural pesticide formulations. It is suitable for mixing / blending powders as well as through mixing of ointments, creams, lotions, toothpastes, resins, slurries, ceramics, colors, pigments, rubber & other compounds.
Planetary mixers consist of a single or double blade with a high speed dispersion blade (Emulsifier / Homogenizer). Intimate & homogeneous mixing of products is achieved by planetary motion of beaters & centrally located high speed dispersion blade for vacuum jacketed mixer units. The PLM consists of two open beaters moving in planetary motion, scraper blade & centrally located high speed homogenizer run by a separate motor to manufacture ointments. creams. suspensions etc.
Emulsifier / HomogenizerIt is a stator-rotor High shear. High speed, & high power mixer are the main characteristics of this stator-rotor mixing device. The high shear action creates a forced product flow. The interchangeability of homogenizer blades is possible to suit the mixing requirements of various products. They are used in many process operations like Homogenization, Dispersion, Emulsification, Grinding , Dissolving, Chemical reaction, Cell disruption & Coagulation.
Salient FeaturesProvision to mix Products under vacuum for de-aeration purpose.
Teflon scrappers are provided to avoid localized heating or cooling & ensure uniform mixing.
Top drive & agitator assembly can be lifted & lowered by motorized as well as hydraulic systems.
Smaller version of planetary Mixer is Provided with a manual lifting arrangement for the bowl instead of top drive & agitator assembly.
Pneumatic system is also available for lifting & lowering top drive & agitator assembly for smaller version of Planetary Mixers. Different designs of beaters are available to suit the mixing requirements of wide variety of materials.
The laboratory model of the PLM mixer with Homogenizer is also available in batch sizes of 2 litres to 5 litres with various types of mixing blades.
Promas Age Over The Other Manufacturer, supplier and exporter of planetary mixers including single and double blades since 1990 from Mumbai to India and entire world. Promas engineers is approved by Indian Defence ordnance factories and explosive chemicals manufacturer industries.
For discharge of high viscous material plunger systems is provided.
5 Litres to 5000 Litres chamber volume
M. O. C:SS 316, SS 304, Carbon Steel
We are manufacturer, supplier and exporter of agitated vacuum dryers according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.
Application:To dry heat sensitive and air sensitive material under vacuum thus accomplishing the drying at moderate temperature avoiding contact with air.
The entire drying chamber is well machined to bring about a close encounter with the agitator blade thus ensuring proper shuffling of the material and thus avoiding localised over heating. The leak proof front opening door ensures easy cleaning of the entire chamber.The top loading and bottom unloading facility provides for easy charging and discharging of the material. The cyclonic trap prevents the fine dust of the dry material from flying into the vapour condenser. The condenser and the condensate collection tank prevent the vapours from entering the vacuum pump. Appropriate vacuum pump and accessories are provided with the unit with valves to adjust the right vacuum in the unit. The entire unit is mounted on a steel frame.
They are used with particular success in agglomeration free rapid drying, heterogeneous reactions with systems of different substances, sterilization and in general for vacuum application. Heating arrangement can also be provided along with the unit.
Choice of product contact materials: AISI 304L, AISI 316L, Hastelloy optional HALAR/PTFE Coating available.
Volume of the wet material loaded into the dryer is restricted to 40-45 % of gross volume.
You will never experience long and tiresome communication lines if you are in need of support because a Promas Engineers representative is never far away. Our local sales and service staff can help you solve any problem that might arise. They can design new solutions and in cooperation with you extend your production facilities further. Promas Engineers continues to assist you during start-up and training of your employees to operate and maintain the machinery all as part of a complete after sales support programme that spans the entire globe. Nitrous oxide gas plants are design according to clients suggestions and requirements. We are authorized dealer, manufacturer, exporter and supplier of nitrous oxide gas plants from Mumbai, India to all over the world with assured quality and safety.You will always experience swift delivery of any spare parts. Standard spare parts are available in stock, and special parts can be made to order. This ensures high production safety, less downtime, maximum lifespan of existing components and continuous upgrades to the very latest components.
Years of manufacturing experience combined with great attention to detail guarantee the superior quality that today has become the hallmark of alt Promas equipment. Our primary goal is to design, supply, service and support solutions that perfectly match your needs. Our engineers ensure that all the technical aspects of installation and start-up run smoothly. They also guide your key personnel through a basic training programme.Promas Engineers services agreement promises complete peace of mind including yearly inspections and regular on-site maintenance.
2 to 12
Model available:
Jet Mills are widely used in the manufacture of drugs and pharmaceuticals, organic and inorganic pigments, optical brighteners, fluorescent pigments, food colour synthetic dyes, metal (except malleable metals) carbides & borides, herbicides and pesticides, ceramic glasses, alumina, feldspar, frit, kaolin, mullite, electronic grade materials such as materials required for semiconductors, phosphors, photo electronic, high temperature critical materials and rocket solid fuels etc. We are manufacturer, supplier and exporter multiple variety manual and fully automated jet mill micronizer, micro pulverizer and spiral fluidize air with industrial requirement.
Jet Milling is a concept of feeding of the powder particles into a flat circular milling chamber and subjecting the same tangentially with pressurized air or nitrogen through a venturi. The Powder Particles are accelerated in a spiral movement inside the milling chamber by number of angular holes in a ring and placed around the periphery of the chamber.The heat sensitive and low melting point materials are easily micronized. Micronizer takes place due to the collision between the incoming particles and the particles, which are already accelerated into the spiral path, The larger Particles of the product get retained at the periphery of the chamber by centrifugal force and the smaller particles exit with the exhaust air from the central portion of the chamber.The material can be milled to an average particles size of 0.2 to 5 micron or coarse ground to 400 mesh depending upon characteristics of the product.
The milling action of the particle is because of the high velocity of air / gases instead of pins, jaws or hammers and because of this heat does not get generated during milling. The adiabatic expansion of compressed air takes place with the resultant cooling effect. The heat sensitive and low melting point materials are micronized without use of freeze grinding method.
The particle size distribution is controlled by adjusting pressure and feed rate. The particles are trapped by specially designed cyclonic separator and finger-bag made of non-woven PTFE coated cloth without risk of fibre contamination.
The dust separator and collector are cylindrical and are having sanitary clamp for quick accessible connections.
The system is without reverse jet so as to save air / gas consumption. With the finger-bag shaking arrangement, the bag is automatically cleaned with a set time interval.
We also provide high-efficiency dust separator combining inertial and static effects with membrane filter cartridges, reverse-pulse, automatic cleaning and final safety HEPA filter that exhausts clean air to the atmosphere. Fully automated and manual jet mills are mounted on an ergonomically designed portable stand with multiple options micronizer, micro pulverizer and spiral fluidize air.
The micronizing of the powder improves absorption capacity of the drugs in the human body. This also results in new and unusual chemical and physical properties relating to suspendability, solid-state reaction rate, texture, colour, absorption etc.
The surface area achieves increase in potency of drugs, which reduces the dosage of the drugs. Product of 30 mesh size when jet milled to 5 micron, has more than 160, 000 particles & surface area increases more than 115 times. This results into faster reaction time for chemicals, faster ignition time in the case of solid fuels of rockets. The Jet Milled pesticides & herbicides cover much more surface area using less of the active ingredients, thus reducing the cost. The polishing powders used for polishing the lenses, computer hard disc or in toothpaste are required to be a narrow particle size distribution for maximum productivity. The abrasives used in these polishing powders are very precisely milled.
Any cosmetic product requiring silky smoothness in application can be achieved in Jet Mill. The reflectivity of light occurs when the particle size of the pigment approaches a precise relationship to the wavelength of visible light. Therefore by controlling the particle size, the product quality & its brilliance can be ascertained.
Jet Mill versions are sanitary, Indian FDA and US-FDA accepted designs, in line with GMP practices and in accordance with all pharmaceutical specifications worldwide. The Jet Mills manufactured by us have replaceable internal rings with optimized grinding angles for various products. The design & construction of Jet Mills are the result of many years of dependable, uninterrupted service.
Promas Engineers Jet Mills can be supplied along with following options
We provide two types of feeding system along with the Jet Mill in accordance to the properties of the products.
Single deck and double deck vibrating screen with without dust cover in SS 304 / SS 316 / GMP construction. Complete Assembly is mounted on fabricated base & isolated by means of specially designed springs. Vibrating assembly is fitted with vibratory motors. Motors are designed for continuous operation. We are located in Navi Mumbai, Maharashtra and operating as manufacturer, supplier and exporter of double cone octagonal blenders according to ISI guidelines and users requirements since 1990 from Mumbai to India and entire world.
We are manufacturer, exporter and supplier horizontal filter press with multiple features. The range of SS Sparkler type Filters ensures precisely the right filtration characteristics for all application in chemical, pharmaceutical, beverages, distilleries & food industries. Horizontal filter press machines are designed and manufactured as per ISO guidelines and international specifications.
The equipment consists of S.S shell and top cover using bolts to give pressure tight enclosure inside which there is a filter cartridge assembly comprising of several horizontally arranged disc type Filter Plates complete with filter media, with perforated supporting screen and interlocking screens. The entire assembly is complete with pump and pumping connection which is usually mounted on a suitable trolley.
