100 Ltrs to 5000 Ltrs

Ploughshare mixer is mainly used for processing of powder, granulates, grains, fradgile material, viscous products & cement concrete materials. We are manufacturer, supplier and exporter of plough share mixers according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.

This is a horizontal mixer consisting of a horizontal, cylindrical container enclosing plough shaped mixing elements mounted on a horizontal shaft.

The mixing effect is increased by separately driven, high speed rotating choppers or multiple choppers, which in cooperation with the plough shaped mixing elements, disperse the lumps and agglomerations or pasty additives with the powdery carriers. These Mixers can be provided with liquid feeding devices, jacket for heating / cooling, choice of seals, vacuum suitability for drying and varied material of construction (like mild-steel, stainless steel, Hastealloy, Monels) to suit the process materials. The Mixer is also provided with solvent recovery system.

1hp, 3hp

multi mills can be used widely for wet & dry granulation, pulverization etc in various type of applications such as pharmaceutical, cosmetic, dyes, colours, food products, spices, detergents, insecticides, plastics & resins fertilizers etc. We are manufacturer, exporter and supplier with iso certification and international guidelines.

it operates on the principal of variable force swing beaters having knife and impact edges rotating within a selected screen to get the required size reduction. Material fed in the hopper, goes down to the processing chamber where it moves to the periphery and passes through the screen radially and tangentially. Finally the processed material gets collected in the container, which is kept below the processing chamber.

• s.s. Perforated screens that can be provided.(a) 0.5, 1.0, 1.5mm hole dia.(b) 2, 3, 4, 5, 6mm hole dia etc.
• s.s. Wire mesh sieve(a) 4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 60(b) 80, 100 mesh.
• castor wheels are provided for easy mobility.
• direction of beater can be changed by reversible switch for knife edge & vice versa.
• available in std / gmp / cgmp & lab models.
• beaters / scraper blades are hardened for specific application

1hp, 3hp, 5hp, 7.5hp, 10hp, 12.5hp model

granulation of dry powders for tablet manufacture bulk density fine tuning sizing. Uniform sizing of wet granulation in tablet manufacturing.lump-free homogeneous blending to precise-size requirements.reducing difficult, sticky, heat-sensitive agglomerates into pieces, crumbs or powders of uniform size, continuously without excessive heat buildup or screen blockage.

the co mill is used for a wide range of products and applications. It can be used for mixing and dispersing, size reducing, separating and bulk density adjustment. The typical particle size distribution (psd) is tightly contained with the 1 mm sieve to 0.25 mm sieve range (18 mesh to 120 mesh), depending on the screen and impeller choices. Traditional milling technologies do not have the same control over the psd resulting in more fines & thus causing more of dust, whereas, in a co mill, the fines generated are much lesser & no dusting of materials, thus, giving a better and efficient milling results. We are manufacturer, supplier and exporter of co mills according to isi guidelines and users requirements since 1990 from mumbai to india and all over the world.

The Colloid Mill can be used as an in line unit (horizontal execution) for continuous operation in a process line, or with a funnel & circulation line (vertical execution). Colloid Mill has a broad application range & is used in the Food, Pharmaceutical, Chemical & Cosmetic Industries & even in water treatment plants. We are manufacturer, supplier and exporter of colloid mills according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.

It operates successfully for products which must be ground & well dispersed. It disintegrates particles faster & uniform swiveling without forming agglomerates & homogenizes products in one pass. The Mill develops not only hydraulic high pressure in the grinding tool section, but turbulence & cavitations which when combined provide both a gentle grinding & the required impact, squeezing, cutting etc. This effects the homogenizing of products & wetting out of powders, all in one pass.

The centrifugal force of the rotor brings the material inside the mill. The rotor & stator combination with its exceptional large surface area provides both a gentle grinding & the required impact effect. A three way valve at the discharge connection of the Colloid Mill can either provide material to inlet opening for rework or discharge the processed material.

100 Ltrs to 5000 Ltrs

Ploughshare mixer is mainly used for processing of powder, granulates, grains, fradgile material, viscous products & cement concrete materials. We are manufacturer, supplier and exporter of plough share mixers according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.

This is a horizontal mixer consisting of a horizontal, cylindrical container enclosing plough shaped mixing elements mounted on a horizontal shaft.

The mixing effect is increased by separately driven, high speed rotating choppers or multiple choppers, which in cooperation with the plough shaped mixing elements, disperse the lumps and agglomerations or pasty additives with the powdery carriers. These Mixers can be provided with liquid feeding devices, jacket for heating / cooling, choice of seals, vacuum suitability for drying and varied material of construction (like mild-steel, stainless steel, Hastealloy, Monels) to suit the process materials. The Mixer is also provided with solvent recovery system.

1hp, 3hp

multi mills can be used widely for wet & dry granulation, pulverization etc in various type of applications such as pharmaceutical, cosmetic, dyes, colours, food products, spices, detergents, insecticides, plastics & resins fertilizers etc. We are manufacturer, exporter and supplier with iso certification and international guidelines.

it operates on the principal of variable force swing beaters having knife and impact edges rotating within a selected screen to get the required size reduction. Material fed in the hopper, goes down to the processing chamber where it moves to the periphery and passes through the screen radially and tangentially. Finally the processed material gets collected in the container, which is kept below the processing chamber.

• s.s. Perforated screens that can be provided.(a) 0.5, 1.0, 1.5mm hole dia.(b) 2, 3, 4, 5, 6mm hole dia etc.
• s.s. Wire mesh sieve(a) 4, 6, 8, 10, 12, 14, 16, 20, 24, 30, 40, 50, 60(b) 80, 100 mesh.
• castor wheels are provided for easy mobility.
• direction of beater can be changed by reversible switch for knife edge & vice versa.
• available in std / gmp / cgmp & lab models.
• beaters / scraper blades are hardened for specific application

1hp, 3hp, 5hp, 7.5hp, 10hp, 12.5hp model

granulation of dry powders for tablet manufacture bulk density fine tuning sizing. Uniform sizing of wet granulation in tablet manufacturing.lump-free homogeneous blending to precise-size requirements.reducing difficult, sticky, heat-sensitive agglomerates into pieces, crumbs or powders of uniform size, continuously without excessive heat buildup or screen blockage.

the co mill is used for a wide range of products and applications. It can be used for mixing and dispersing, size reducing, separating and bulk density adjustment. The typical particle size distribution (psd) is tightly contained with the 1 mm sieve to 0.25 mm sieve range (18 mesh to 120 mesh), depending on the screen and impeller choices. Traditional milling technologies do not have the same control over the psd resulting in more fines & thus causing more of dust, whereas, in a co mill, the fines generated are much lesser & no dusting of materials, thus, giving a better and efficient milling results. We are manufacturer, supplier and exporter of co mills according to isi guidelines and users requirements since 1990 from mumbai to india and all over the world.

The Colloid Mill can be used as an in line unit (horizontal execution) for continuous operation in a process line, or with a funnel & circulation line (vertical execution). Colloid Mill has a broad application range & is used in the Food, Pharmaceutical, Chemical & Cosmetic Industries & even in water treatment plants. We are manufacturer, supplier and exporter of colloid mills according to ISI guidelines and users requirements since 1990 from Mumbai to India and all over the world.

It operates successfully for products which must be ground & well dispersed. It disintegrates particles faster & uniform swiveling without forming agglomerates & homogenizes products in one pass. The Mill develops not only hydraulic high pressure in the grinding tool section, but turbulence & cavitations which when combined provide both a gentle grinding & the required impact, squeezing, cutting etc. This effects the homogenizing of products & wetting out of powders, all in one pass.

The centrifugal force of the rotor brings the material inside the mill. The rotor & stator combination with its exceptional large surface area provides both a gentle grinding & the required impact effect. A three way valve at the discharge connection of the Colloid Mill can either provide material to inlet opening for rework or discharge the processed material.