Zydex Waterproofing Chemical, Purity : 90-92%

Listing ID #5952351

Waterproofing Chemical - Zycosil Plus + Zycoprime Plus Zycosil Plus Zycosil Plus is a water soluble penetrative solution for waterproofing of masonry building material. Zycosil is Nano technology based as it provides molecular level hydrophobicity to inorganic substrate and it is eco-friendly as it is applied in water solution. The product is based on organosilicon chemistry, hence reacts with the inorganic substrate surface, seals the surface uto a depth of 2-3 mm and provides long service life. The Nano size allows penetration deep into substrate that provides 20+ years water repellency. This product is very economical. Zycosil is 10-20 % of the cost of solvent based silane technology. Zycosil and its diluted solution are non flammable and easy to apply using paint brush, roller or airless spray. No special tools or precautions are necessary to handle the product. It is ideal for making the roof and walls water repellent.   Additional Information :-     ► 100% Silane     ► Water soluble nanotechnology     ► Life: 20+ years     ► Penetrative in very fine pores and cracks     ► Reactive, non leachable     ► UV & Heat stable     ► Abrasion resistant     ► Does not break like a surface film     ► Gives long lasting protection   ZycoPrime+ ZycoPrime+ is an Acylic co-polymer emulsion, supplied as a ready to use bonding agent in liquid consistency. It is a versatile product and can be used as a cement modifier for repair of spalled concrete - slabs, balconies, beams, columns, floors & waterproofing of toilets, bathrooms and terraces.   FEATURES & BENEFITS :-     ► Multipurpose, UV stable & Economical.     ► When used in concrete / plaster, it prevents cracking.     ► It reduces drying and shrinkage cracks.     ► Reduces permeability of water.     ► Improves workability of concrete / plaster.     ► Bonds strongly with concrete, plasters, cementitious surfaces.     ► Reduces viscosity of cement-injection grout and tile adhesives for better fluidity & bonding.   APPLICATION AREAS :-     ► Waterproofing Membrane : Roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc.     ► Concrete Repairs : Spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc.     ► Waterproofing &/or Bonding Primer : Walls & Slabs.   APPLICATION METHOD :-                                                                    Clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. De-grease the surface by using suitable solvents, if needed.   Bonding Primer To be used as a clear bonding primer by diluting 1:5 with water. Apply on the walls before painting or during putty rendering.   Waterproofing Primer For priming of concrete substrate, the surface should be thoroughly saturated with ZycoSil+ solution (Dilution Ratio - 1 part ZycoSil+ : 20 parts potable Water : 2 parts of ZycoPrime+).   Waterproofing Membrane For a waterproofing coating mix 1 part ZycoPrime+ with 1 part of cement & 1 part of 100 mesh sand. Add water for brushability. Brush apply the mix in span of 4-6 hours on the prepared concrete substrate. It is recommended to saturate the surface with ZycoSil+ solution prior to this application. Overlay the coating with a protective screed to the desired slope and thickness. Coverage : 4-5 m² for a 0.2 mm (200 microns) coat.   Repair Mortar & Renders, Floor Screed & PCC   Prepare the Mortar in the following proportion: Cement 50 kg Washed Sand 75 kg 6 mm Down size aggregates 75 kg ZycoPrime+ 6-7.5 litres Water 10 litres For PCC & Plaster work : ZycoPrime+ 100 ml per bag cement (conforms to IS 2645 - 2003).   APPLICATION DETAIL :-  Sr. No.  Application  Recipe  Zycoprime + Qty.  1  Patching & Repair Mortar  Portland Cement : 50 kg Washed Sand : 10 KG Water : 10 ltrs  6 - 7.5 ltrs  2  PCC / Plaster  Portland Cement : 50 kg  100 ml  3  Waterproofing membrane (ro