Yarn Count Scale

Before you install the scale, identify the best location for the equipment. The proper environment enhances its operation and longevity. Keep in mind the following factors, which might have a negative influence on the scale’s operation:

• Vibration : Vibration diminishes the scale’s ability to measure accurately. Electrical machinery such as conveyors and drill presses can cause inaccurate and non-repeatable readings. The scale may also read inaccurately if it is not leveled properly. The scale incorporate a special weighing mode where the scale can reject readings with vibration up to some extent.
• Drafts / Air currents : Moving air can cause the scale to read wind movements as an additional force and cause inconsistence in the weighing results.
• External Rubbing / Friction : A scale cannot measure accurately if an object is rubbing or pressing against the scale platform.
• Moving the scale : If you move the location of the scale it may require recalibration. Please check the calibration when the scale is moved to a new location.

Leveling The Scale : Level the scale by turning the adjustable feet, It is leveled correctly when the bubble indicator is in the center of the circle.
Switching Scale – ON/OFF : The scale is switched ON/OFF by using the Power Switch located on the left side of the scale.the display will start up message and come to L. 0.000. - Lee MODE.
NOTE : Make sure the weighing pan is empty before turning on the scale.
Functions

• CAL
  
  • Calibration setting Confirmation key
  • External calibration of scale
  • Used as the shift digit key in the setting menu.
• MODE
  
  • Used for setting between weighing units.
  • Lee/Hank/Simlex/gram –weighing
• TARE : Used to re zero an unwanted reading on the display also used for going to the CAL mode.

Mode Functions

• L (LEE) - This mode operate in 120YARDS. This is used for Testing YARN count ( SPINNING MACHINE YARN)
• H (HANK) - This mode operate in 6 yards. This is used for testing COTTON SLIVER (GARDING MACHINE )
• S (SIMLEX ) – This modeoperate in 15 yards. This is used for testing COTTON SLIVER – STAGE –II.
• GM (GRAM) – NORMAL WEIHING in gram mode (0.01g)