Worm Wheel Shafts

worm gears are very useful gear for different industries. worm gears are used when large gear reductions are required. the worm wheel shaft that we offer has a unique property of easily turning the gear. the gear cannot turn the worm because the angle on the worm is shallow and when the gears try to spin the worm, the friction between the two holds the worm in place.
worm wheel shafts work under difficult conditions, presenting unique lubrication demands. the types of oils most commonly used to lubricate worm gears are compounded mineral oils, especially mineral gear oils and synthetics. worm gears are highly useful gears, which is more particularly used in the mining industry. these types of worm wheel shafts or worm gears are normally placed in motors where large gear reductions are necessary. there are two components in this type of a gear, the worm or the screw and the worm gear or the worm wheel.
worm wheel shafts can reduce the rotational speed of the motor to achieve a higher torque. however, it is not a reversible type of a gear. the motion flows through one direction alone. reducing the speed is possible, but increasing the drive is not. power to the drive will be increased as the speed is reduced. worm wheel shafts contain teeth that correspond to the shafts on the wheel. as the gear revolves, the shaft advances one tooth of the gear. the speed is reduced by the factor corresponding to the number of teeth the gear has. for a 20- tooth gear, the speed will be reduced by the factor of 20. the fewer teeth the worm gear has, the faster the movement of the motor will be. the rotation axis follows a 90- degree angle.
raw material used :

• m.s.
• c.i
• ph. bronze
• gun metal

• power transmission
• speed reduction