Listing ID #4157172
Company Information
Ask for more detail from the seller
Contact SupplierIndustrial control System, continuous carving during power failure and break point and speed control with the easy one button operation, high efficient. If can compatible with Type3, Artcam, Alphacam, ARTCUT, JD, Paint etc. CAM Software’s from home and abroad.
Our electric spindle adopt High-Speed bearing technology. With hig Rotational speed, Low noise, large power, Fast response, Dynamic performance and stability. To meet the high speed work.
High hardness table with PVC engineering – plastics, smooth and flat, matrix adsorbed slot, and equipped with professional large power vaccum pump, high adsorption capacity, moreover, positioning air cylinder is an optional part, easier and more accurate for positioning.
Model | SM-1325 | |
Working Travel | X axis | 1300mm |
Y axis | 2500mm | |
Z axis | 200mm | |
Table structure | Aluminum | |
Orbit | HIWIN or PMI square orbit | |
Transmission Type | X,Y Rack, Z Ball Screw | |
Working Accuracy | +0.05 | |
Repositioning Accuracy | +0.05 | |
Max air move speed | 20000mm/min | |
Max working speed | 10000mm/min | |
Spindle parameters | Type of cooling | Water cooling |
Power | 3.2 KW, 4.5KW, 5.5KW | |
Speed | 0-24000r/min | |
Inverter | Sunfar Inverter | |
Drive System | YAKO-YKA2811MA | |
Command Code | G Code | |
Control System | RichAuto DSP | |
Oiling system | Manual | |
Working Voltage | AC380V/3PH/50HZ |