Company Information
Member Since 8 Years
Nature of Business RetailerAsk for more detail from the seller
Contact Supplier
- The entire system is controlled by Electronic Panel based on Thyristor and D. C. Drive Control Panels
Manufacturing Process:
- Set the desired welding points (depending on the mesh size required) and start the machine
- The line wires from the Pay Off stands are fed to the machine from the rear side through wire guides.
- Cross wires duly pre-straightened and cut to length (equal to the required width of the mesh) on Wire Straightening and Cutting Machines (optional equipment) are dropped from the rack on to the welding station.
- The line and cross wires are rhythmically welded.
- The speed of welding is controlled through the control panel.
| Model: | WMM-12 | WMM-15 | WMM-25 | WMM-27 |
| Max. welding width (mm): | 1250 | 1550 | 2000 | 2500 |
| Line wire spacing (mm): | 15 - 75* | 25 - 150 | 50 - 150 | 50 - 200 |
| Cross wire spacing (Steplessly adjustable) (mm): | 15 - 75* | 25 - 150 | 50 - 150 | 50 - 200 |
| Range of line wire (mm): | 1.2 - 3 | 1.6 - 4 | 3 - 6 | 3 - 6 |
| Range of cross wire (mm): | 1.2 - 3 | 1.6 - 4 | 3 - 6 | 3 - 6 |
| Max. welding speed (strokes per minute): | 80 | 80 | 60 | 60 |
| Power load (kVA): | 200 | 200 | 350 | 400 |
| Welding Transformer at 50% Duty Cycle (Qty. / kVA): | 4 / 50 | 5 / 75 | 6 / 100 | 6 / 100 |
| Motor: | 12.5 HP D/C | 15 HP D/C | 20 HP D/C | 25 HP D/C |
| Net / Gross Weight (Kg.): | 3150 / 3800 | 4300 / 5000 | 6500 / 7500 | 7000 / 8000 |
| Overall Dimensions (m): | 2.5 x 1.5 x 1.8 | 3.1 x 1.6 x 1.9 | 4.0 x 2.0 x 2.2 | 5.0 x 2.0 x 2.2 |
| Shipping Volume (m3): | 6.8 | 9.5 | 18.0 | 22.0 |
Connect with us
For Buyer 
For Seller 
Help 
Nariman Point, Mumbai, Maharashtra 
Send Enquiry