Water Stopper Seals

Listing ID #2066568

Water stopper seals:
a. pvc water stop seal: pvc water stops are for use in concrete joints subjected to hydrostatic pressures. After being embedded in concrete, pvc water stops fill up the joints to form a continuous watertight diaphragm that prevents the passage of fluid. The water stop must be designed and installed properly to accommodate joint expansions, contraction and lateral & transverse movements. In addition to these considerations the water stop must be compatible with the concrete system and the liquids and chemicals to be contained or controlled.
installation:
most popular way of the placement of the water stop seal is tied to the steel frame works or small eyelet by means of small wires, certain metal clamps made to grip the water stop seal to keep it in proper position.
b. thermoplastic elastomeric water stop seal: thermoplastic elastomeric (tpe) water stops made specifically from poly vinyl chloride and blended with nitrile butadiene rubber is undoughtily designer's best choice for chemical environment and all type of typical water applications. Our water stop is used as a watertight fluid tight diaphragm in concrete structure that provide good mechanical bounding with the concrete and a barrier against migration of liquid flow through the joints.
our tpe water stop is resistance to a wide range of minerals, oils, solvents, alkalise, acids, salts and glycols, chlorinated sea water, fuels, aggressive chemicals and fluids. Our tpe water stop is resistant oxidation, ozone, has a good compression set resistance and reliance property at low temperature (up to -32º c) with excellent ageing properties & good staining resistance.
c. copper metal water stop seal: coppermetal water stop seal is used for heavy structures, where joints are to be extra-ordinarily protected. Due to its ductile nature copper is the most suited material for this purpose.
various shapes of copper may be used to serve the application is most common.
shape either in the thickness of 1.5 mm or 1.8 mm.
the integrity of the water stop system depends on proper fabricated water stop splices to achieve a complete fluid tight system.