BIO-OXYMAS Waste Water Treatment Chemical, Packaging Size : 25Kg

BIO-OXYMAS WORKING PRINCIPLE 

BIO-OXYMAS contains an Oxygen + Bacteria stimulator. BIO-OXYMAS will enhance the Oxygen level in the aeration tank. When the Oxygen level increases, it helps to Detoxify Harmful gases and 

substances such as Ammonia, Nitrates, and H2S. The stimulator will improve the bacteria growth. When toxic chemicals are removed from the sewage, bacteria growth will improve, which will degrade the sludge and reduce the sludge level. 

BIO-OXYMAS process is an accelerated and advanced form of the natural process used in conventional STP and helps to treat wastewater with minimal use of Biochemical There is the reduction in sludge by more than 90-95% which results in effective odour reduction which is one of the major issues faced in STP 

Due to raw sludge reduction by use of BIO-OXYMAS in STP there is less accumulation of sediments in the STP and requires less maintenance. Also there is 40%-60% reduction in power consumption depending on the system and treatment condition requirement thus this process has been designed to bring down the operation and maintenance cost of the STP.

C.O.D lowering study proven result:

If the average content of organic pollutants determined by chemical oxygen demand (C.O.D) is 538/L, the use of BIO-OXYMAS caused the oxidation of organic pollutants and lowering of C.O.D in the following ranges: 22 – 46 %. When you add BIO-OXYMAS in the collection tank, it will break the harden sludge. That will be converted as a MLSS (Mixed Liquid Suspended Solids)

Note

• BIO-OXYMAS adding quantity will vary depending upon the Sewage Treatment Plant condition and in flow rate of the Sewage water.

• In the collection tank, if the harden sludge is more then we have to add BIO-OXYMAS more according to the condition of the MLSS present in the aeration tank.

• In the aeration tanks if the contamination level and flow of the Sewage water is high then also we have to add more BIO-OXYMAS, according to the condition. 

• We can stop the Blower in aeration tank when we apply BIO-OXYMAS, The stop timing will be vary depending upon the plant condition and time interval of dosage.

• Strictly check the pH level before using the treated water for gardening purpose. If the pH level is greater than 9, must use pH reducing agent on or after final filtration.

BENEFITS

• Remove & control foul smell instantly.
• Removes rather than masks odors.
• Oxidize Organic & Inorganic compounds.
• Increase the Bio Degradability of the Effluent & enhance the Slurry.
• Reduction in Bio Oxygen Demand (BOD) & Chemical Oxygen Demand (COD).
• Detoxify Harmful gases and substances such as Ammonia, Nitrates and H2S.
• Break the harden sludge in the collection tank.
• Reduce sludge formation.
• Develop MLSS (Mixed Liquid Suspended Solids)
• Helps in development of Aerobic & Anaerobic Microbes.
• Achieves significant purification of treated effluent.
• Reduce the Blower running time & save electricity
• Increase the life time of the filtration components.