Wall Touch Putty

We are a well-known Manufacturer and Supplier of Wall Touch Putty from Vijapur in Gujarat. Wall Touch Putty (Wall Putty) is a white cement based polymer modified wall putty specially developed as a finish coat to cover unevenness and pinholes in plastered surfaces and to make the walls / ceilings ready for painting. As it is white, it can be treated as a base coat for painting.

Area of Applications : Wall touch specially developed as a finish coat to cover unevenness and pinholes in plastered surface and to make the wall/ceiling ready for painting.

Features & Benefits :

• Excellent Whitest putty

• Highly water resistant

• Strong bonding to the base plaster

• Excellent smooth finish

• Excellent workability

• UV Resistance

• True color tone of the paint is maintained, primer is not required

• Protects expensive paint from dampness, peeling off and flaking

• Makes paint durable

• Paint finish is superior

• Suitable for interior as well as exterior

• Reduces paint consumption

• Avoid frequent repainting

• cost effective

• Aesthetic look for ceilings, interior and external walls

• Ease of use at site

Method Applications :

• Dampen the surface to be plastered with clean water. Allow excess water to drain off.

• Using a steel trowel/blade, apply the above mix to a thickness of about 0.5-1 mm level and smoothen the surface.

• Apply the second coat 0.5-1 mm after the first coat has fully dried and set. In areas of high temp. and low humidity for two days is recommended.

• The thickness of each coat should not exceed 1mm and total plaster thickness should not exceed 2mm

• Smoothen with a steel trowel, Sand paper if so desired with 600no. Of sand paper

Test Result of Wall Touch

• Pot life 115 min

• Whiteness 90% +

• Autoclave expansion Nil

• Workability good.

Application Mixing :

• Take 300-400 ml of clean water for 1Kg of WALL TOUCH (Wall putty) in a clean bucket. It is very important that Wall Touch to be Added in water and not vice versa.

• Stir continuously by using an electric mixer or by hand to obtain a homogeneous lump-free paste.

• Allow the resultant paste to stand for about 10 min. for the additives to dissolve

• Re- mix again for about 2 min. the mixture is now ready

• Use the mix within 1Hrs

Packing : 20kg, 40kg BOPPE Export quality bag.

Coverage : We recommend :

• Maximum two coats (Layers) of Wall Touch.

• Minimum thickness of 1^st coat (Layer) 0.5 to 1mm.

• Maximum thickness of 2^nd coat (Layer) 0.5 to 1mm.

• Total thickness can go up to 1 to 2 mm in 2 Layers.

Precaution & Limitation

• Although wall Touch do not contain any toxic material, use rubber gloves while mixing

• Precaution should be taken to avoid dust inhalation while handling putty powder or during removal of application makes with fine emery paper-say wearing nose mask.

• Keep the product out of reach of children.

• Once putty paste has hardened, it shall not be used by adding water.

Shelf Life & Storage :

• Factory sealed bag of this product are guaranteed to be fist quality for Six month * if stored off the ground in a dry area.
• Store in a cool & dry in unopened condition away from direct sunlight

Other Products Categories Available : Brings the widest range of Construction Material & Chemical.