Health & SafetyFor information and advice on the safe handling. Storage and disposal of chemical products. users shall refer to the most recent material safety data sheet containing physical, ecological, toxicological and other safety - related data.
NoteGenerally the cause of efflorescence on the wall surface is the brick masonry, which is due to the quality of bricks, sand and water. If the effect of efflorescence is very high on the brick masonry then proper care should be taken to control the efflores
BenefitsBeing a cementitious material it has better adhesiveness and durability with the concrete walls. Can be applied on both interior and exterior walls and ceilings. Does not require any water curing after application thus saving time & cost. Bein
Precautions During UsageThough it contains non-toxic materials but still care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or mouth, wash with plenty of clean water. Keep it in a dry place and out of reach of children.
Storage / Shelf-lifePowerGrace Wall Care Putty should be stored in a dry place. For best results use it within 12 months from date of manufacturing.
DescriptionWall Care Putty is ready to use water resistant white cement based finishing/ smoothing material for indoor and outdoor plastered surfaces.
Health & SafetyFor information and advice on the safe handling. Storage and disposal of chemical products. users shall refer to the most recent material safety data sheet containing physical, ecological, toxicological and other safety - related data.
Packaging Size20kg, 40kg
Substrate PreparationIt is very important and essential that the surface is wet thoroughly before the application of PowerGrace Wall Care Putty. The surface should be wet during application. This ensures higher bonding strength, easy work ability & higher coverage with the su
Application MethodAfter thoroughly mixing of PowerGrace Wall Care Putty, apply the first coat on the moistened wall surface from bottom to upward direction uniformly with the aid of putty blade. This would ensure minimum wastage and proper finish. After drying of f
CoverageThe coverage area of PowerGrace Wall Care Putty on smooth normal mortar wall is an approx 18-22 sq. ft / kg / mm in 2 coats on smooth finish substrate in optimum conditions.
Precautions During UsageThough it contains non-toxic materials but still care should be taken to avoid dust inhalation while mixing and handling. In case of contact with eyes or mouth, wash with plenty of clean water. Keep it in a dry place and out of reach of children.
MixingMix Powergrace Wall Care Putty with 35-40% clean water, Continue mixing until a homogeneous lump free paste of desired consistency is obtained. Apply 1st coat of Powergrace Wall Care Putty uniformly on already moistened surface with the help of putty blad
NoteGenerally the cause of efflorescence on the wall surface is the brick masonry, which is due to the quality of bricks, sand and water. If the effect of efflorescence is very high on the brick masonry then proper care should be taken to control the efflores
Value BaseAll technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.
BenefitsBeing a cementitious material it has better adhesiveness and durability with the concrete walls. Can be applied on both interior and exterior walls and ceilings. Does not require any water curing after application thus saving time & cost. Bein
Application PrecautionsMixing of the Powergrace Wall Care Putty is very important , hence extreme care is to be taken for proper and thorough mixing. It should be preferably mixed with mechanical stirrer in order to get best results. It is very important that during mixing the
UsagesWhite cement based finishing/ smoothing material for indoor and outdoor plastered surfaces. Renders a smooth and durable surface and acts as an under layer for all kinds of decorative paints.
Surface PreparationBefore applying PowerGrace Wall Care Putty remove all loosely adhering material from the wall surface with the help of sand paper, putty blade or wire brush. The substrate should be clean, free from dust, grease and loose materials. Moisten the wall with
Interested in this product? Ask for more details & Latest Price from seller
Member Since 4 Years
Nature of Business Supplier
For Buyer 
For Seller 
Help 
Ahmedabad, Gujarat 
Send Enquiry