Formwork Release Emulsion

Listing ID #5673321

vitcon 9033 relol wem is white coloured concentrated mould release emulsion used for formworks used in the construction industry. the concentrated solution has to be diluted with water before applying to get a stain-free release of moulds after placing of  concrete. vitcon 9033 relol wem is based on refined speciality oils and fatty acids blended with special additives. vitcon 9033 relol wem is specifically formulated for wooden formworks where release of formworks is extended for extended hours.
applications:
vitcon 9033 relol wem is applied after dilution on the formwork surface after cleaning the loose particles or any contaminated oils off the surface. only one coat has to be applied with a thin film thickness. excess thickness may result in surface dusting of concrete. the second coat is only recommended for high absorbent new timber formworks. the coating should be ensured to be uniform all throughout the surface. the coating should be allowed to dry before placing of concrete. the freshly applied formworks have to be protected from rainfall; otherwise the emulsion will be diluted before drying resulting in poor performance.
specifications:

• appearance: pale ambour coloured liquid
• sp. gravity: 0.85 ± 0.02
• ph: 8 – 9
• chloride content: nil
• shelf life: 12 months
• storage: under shade