VHF S1 Impression Dental Milling Machines

S1 Impression is the most versatile dental milling machines.

They have five simultaneously working axes and are designed for dry machining as well as for wet machining. The second rotary axis (B axis) with a rotation range of up to ± 30 degrees enables you to mill undercuts.

Not just for dry machining: Machines are prepared for connecting the wet grinding module. This opens up new processing possibilities. There are liquid nozzles already integrated at the spindle so that the tool will be optimally cooled while grinding. Thus you can grind all common glass ceramic types.
Features
5 simultaneously working axes

The second rotary axis (B axis) with a rotation range of up to ± 30 degrees enables you to mill undercuts and so opens up new machining possibilities. 

Machine bed of massive aluminium cast

Thus these machines gain much stability at minimal exterior dimensions. Moreover, vibrations are reduced and the mechanics is optimally protected

Automatic Changer for 16 Tools

In addition to the currently required tools, you can equip the tool changer with replacement tools right away. Thus you can continue working without interruption if a tool is worn out. The haptic tool measurement enables the usage of diamond-coated tools. 

Worldwide Applicable

Due to far range switching mode power supply for 100 – 240 V and 50/60 Hz with country-specific mains plug. Certification according to ANSI/UL 61010-1 for exports to the USA and Canada. 

Sophisticated protective mechanisms

Protection of the danger zone during the machining process due to an automatic safety interlock at the frontcover. Protection of the mechanics against dust and chippings as well as reduced wearing and maintenance effort due to integrated working chamber sealing air concept.

Wide range of materials and indications

Machining of plastics, wax, PEEK, zirconium oxide and composites up to non-precious alloys on cobalt-chrome basis and glass ceramics. For crowns, bridges (also fully anatomical), inlays, onlays, abutments, telescope crowns, model plates, model casts, bite splints, model plug-in teeth, implantbars, veneers, table-tops, etc.

Powerful and highly precise synchronous spindle

With 4-fold hybrid ceramic ball bearings and a nominal power of 300 W under continuous load. 

No previous knowledge necessary

Very easy operation via provided CAM software DentalCAM with Direct-Mill function – no previous knowledge in milling and grinding necessary.
 

S2: blank changer for 8 blanks

You fit the changing station with blanks via a smaller additional front cover. The proper blank for your milling job is inserted into the fixing device automatically when required. So the machine can mill around the clock and no operation steps have to be performed.
 

Optional wet grinding module

Both machines are prepared for connecting the wet grinding module. There are liquid nozzles already mounted at the spindle so that the tool will be optimally cooled while grinding. Thus you can also process glass ceramics