We are offering pasting gum powder.
Pasting gum:
pasting gum may be defined as the adhesive used for combining paper to paper, paper to board, or board to board in packaging industries, in corrugating industries this adhesive is used for subsequent production of multiwall boards out of single faced corrugated boards and flat kraft liners or duplex or pulp board.
pasting gum powder :
our pasting gum powder is purely 100 % tapioca based. The available ratio of gum powder (kg) to water (litres) is 1: 3, 1:4, 1:5, 1:6 & 1:7.
Most of the adhesive manufacture use acids as a catalyst to react the starch and their product but we are using water soluble resins as a catalyst which make us different from others in terms of bonding and drying of sheets.
Uses: it is used in manual pasting machine and semi automatic pasting machine.
advantages
easy to mix
lower consumption of glue
maintains viscosity and solid content
dries quickly
gum preparation method – 200 kg (1:6)
take (approx 100ltrs) of water in a vessel.
Open a gum powder bag and you find a packet of gum compound (chemical) inside the bag, remove the chemical packet and keep the packet aside.
Now put the gum powder in the vessel and place the gum compound (chemical) above it and start stirrer and stir for approx 30 minute.
(note: stirring 30minute will cook the gum and help to produce a good quality gum)
(observation: after 30 minutes touch the gum vessel from outside you will
observe the vessel is warm)
now add the remaining part (approx 70ltrs) of water.
check and set the viscosity between 25 to 35 sec in ford b4 cup.
(note: to set the viscosity between 25 to 35 sec you may need approx 10ltrs of water
note: it is must to have a high speed mechanical stirrer with minimum 3hp motor and 1440rpm for preparation of gum

We are offering pasting gum powder.
Pasting gum:
pasting gum may be defined as the adhesive used for combining paper to paper, paper to board, or board to board in packaging industries, in corrugating industries this adhesive is used for subsequent production of multiwall boards out of single faced corrugated boards and flat kraft liners or duplex or pulp board.
pasting gum powder :
our pasting gum powder is purely 100 % tapioca based. The available ratio of gum powder (kg) to water (litres) is 1: 3, 1:4, 1:5, 1:6 & 1:7.
Most of the adhesive manufacture use acids as a catalyst to react the starch and their product but we are using water soluble resins as a catalyst which make us different from others in terms of bonding and drying of sheets.
Uses: it is used in manual pasting machine and semi automatic pasting machine.
advantages
easy to mix
lower consumption of glue
maintains viscosity and solid content
dries quickly
gum preparation method – 200 kg (1:6)
take (approx 100ltrs) of water in a vessel.
Open a gum powder bag and you find a packet of gum compound (chemical) inside the bag, remove the chemical packet and keep the packet aside.
Now put the gum powder in the vessel and place the gum compound (chemical) above it and start stirrer and stir for approx 30 minute.
(note: stirring 30minute will cook the gum and help to produce a good quality gum)
(observation: after 30 minutes touch the gum vessel from outside you will
observe the vessel is warm)
now add the remaining part (approx 70ltrs) of water.
check and set the viscosity between 25 to 35 sec in ford b4 cup.
(note: to set the viscosity between 25 to 35 sec you may need approx 10ltrs of water
note: it is must to have a high speed mechanical stirrer with minimum 3hp motor and 1440rpm for preparation of gum