Features ( Specification ) :-

Drive System:-Motor : 3 KW Servomotor of standard make with PLC & 5.7 inch HMI with minimum 5 mt. cable along with electric control panel.

The mechanism is such that, the amplitude/ displacement and the frequency or time can be changed to provide variation in shaking. Thus, the excitation is not only harmonic in

nature, but it can be programmed as any random ground motion.

Imported smooth gear mechanism attached with servo motor with racks and pinions to the shaking table.

Top shaking plate shall have holes of diameter 10 mm with 100 mm c/c in both directions.

Pedestal Linier bearings : 6 Nos. of standard make

Assembly : Non eccentric-which permits +/-50 mm displacement

Fixing bolts : High Tensile steel 10 mm diameter,40 mm long, 60 Nos.

Tool kit required for operation of the machine 1 NO.

Foundation bolt 18 mm diameter, 150 mm long & 4 Noswithnut & washers.

Sturdy supporting structure made up of box sections.

Numeric values Input shall be possible through manually from HMI control panel as well as through computer with software.

P.C. connectivity through Ethernet and USB port.

Machine operates on 3 Phase A.C. 450 volts supply.

INCLUDING EXPERIMENTAL MODELS LIKE:-

(1)Shear Wall Model

(2)Spring-Mass Model

(3)Soil liquefaction model

(4)One storey frame model with stiffeners

(5)Model of bracing system

(6)Ductile detailing model

(7)Model for pounding effect

(8)Mode shape model

(9)Model of irregularities in structures

Features ( Specification ) :-

Drive System:-Motor : 3 KW Servomotor of standard make with PLC & 5.7 inch HMI with minimum 5 mt. cable along with electric control panel.

The mechanism is such that, the amplitude/ displacement and the frequency or time can be changed to provide variation in shaking. Thus, the excitation is not only harmonic in

nature, but it can be programmed as any random ground motion.

Imported smooth gear mechanism attached with servo motor with racks and pinions to the shaking table.

Top shaking plate shall have holes of diameter 10 mm with 100 mm c/c in both directions.

Pedestal Linier bearings : 6 Nos. of standard make

Assembly : Non eccentric-which permits +/-50 mm displacement

Fixing bolts : High Tensile steel 10 mm diameter,40 mm long, 60 Nos.

Tool kit required for operation of the machine 1 NO.

Foundation bolt 18 mm diameter, 150 mm long & 4 Noswithnut & washers.

Sturdy supporting structure made up of box sections.

Numeric values Input shall be possible through manually from HMI control panel as well as through computer with software.

P.C. connectivity through Ethernet and USB port.

Machine operates on 3 Phase A.C. 450 volts supply.

INCLUDING EXPERIMENTAL MODELS LIKE:-

(1)Shear Wall Model

(2)Spring-Mass Model

(3)Soil liquefaction model

(4)One storey frame model with stiffeners

(5)Model of bracing system

(6)Ductile detailing model

(7)Model for pounding effect

(8)Mode shape model

(9)Model of irregularities in structures