UCI & Leeb Combined Hardness Tester

The device operates with both UCI (Ultrasonic Contact Impedance) and Leeb (dynamic) probes. User get the benefits of two methods of measurement – it is the maximum that can be obtained from portable hardness tester.

UCI method for the hardness testing: The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers.

Leeb method for the hardness testing:

Leeb probe is used for measuring the hardness of non-ferrous metals, cast iron, coarse-grained materials, massive products etc.

Hardness tester allows user to measure the hardness at extremely low temperatures. The real tests has been carried out at a temperature of 25°C below zero. The device is operated very easy, the measurement accuracy did not exceed the value according to standards, keyboard and display of the device allowed user to operate confidently – the difference between the operating at the indoor temperature and operating at the extreme cold was not noticeable at all!

We have the CE certificate of conformity for Portable Combined Hardness Tester NOVOTEST T-UD3.

Advantages

• Small imprint after measuring (mirror surfaces of shafts necks, blades, gear teeth, etc.)
• Measuring the hardness of the surface hardened layer
• Wide range of hardness testing
• Various measurement modes
• 88 combinations of materials and hardness scales (calibrations)
• Calibration of any scale in any range
• Convenience and ease of measurement
• Optimized number of buttons
• Large full color graphic display with bright backlighting
• Photofixing of measuring samples
• Automatic recognition of probe
• Indication of the type of connected probe
• Calibrations stored in memory of UCI probe
• Extended temperature range (frost, down to – 40°C)
• Internal memory and communication with PC
• New intuitive menu with tips on the buttons
• Optional wireless mini printer
• Water resistant case
• Rubber bumper protected case
• Internal clock
• Measure hardness value of any mass products with a thickness more than 1 mm (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape, hardness testing of metal coatings, etc.)

Specifications:

• UCI probe types - 1kgf (10N) 2.2 lbf, 5kgf (50N) 11lbf, 10kgf (98N) 22lbf
• Leeb probe types - D, DC, DL, C, D+15, E, G
• Measuring range - HV:230~940; HRC:20~70; HB:90~650. Tensile strength, MPa 370~1740
• Measuring accuracy - HV:±3%HV; HRC:±1.5%HRC; HB:±3%HB
• Indenter - Diamond indenter (UCI), Hardened ball (Leeb)
• Measuring direction Any direction 360°
• Data storage - Limited only by the memory card
• Hardness scale - RC, HB, HV, HRB, HS, HL, MPa
• Indication - Color LCD display (320×240)
• Operating environment Temperature:-20°C~40°C; Humidity - 30%~80%R.H.
• Power supply DC 4,5V (3 pcs batteries AA)
• Instrument dimensions 160x75x30mm
• Battery life Approx. 10 hours

Additional Information:

• Item Code - T-UD3
• Approx. Rs 1.75 Lakh / Piece(s)
• Combined Hardness Tester NOVOTEST T-UD3