Tubular Stranding Machine

Product Details

Objectives	The Machine Will Be able to make 7 wire strands
Nurnber of Bobbins	1+6
Bobbins	Flange Diameter 630mm Overall Width 475mm Bore 127mm Barel 250mm Traverse 400mm
Minimum Speed of cage	500 RPM
Stranding Pitch	50mm to 300mm limited
Machine Center Height	1000mm
Operating direction	Left to Right as your requarment
Closing die holding	A quick Clamping closing die holder to hold the closing die distance between Lay Plate and closing holder is adjustable by a hand wheel.

Measuring unit	The measuring unit consists of counter – meter and measuring pulley to measure accurately the length of wore produced
Haul off device	1000 mm grooved type dual capstan will be provided the haul off consists finely polished dual grooved capstan wheel driven by means of gear box left and right hand lays can be obtained lay change is effected by means of change gears Lay – 50mm to 300mm limited
Lay Change Gear Box & Speed	Lay Will be 50mm to 300mm Lay Change through 10hp gearmotor & A/C Drive Panel (fully automatic)
Traverse	The unit will be driven by separately 1 hp Geared motor
Take up unit	The Take up Stand suitable for 2000 mm die drum and traverse 1000 mm ,Pillar Type Take up
Drum Size	Flange Diameter 2000mm Traverse 1000mm Overall width 1600 mm Barrel Diameter 600 mm to 800mm Bore Diameter 80 mm

Line Description
PAY OFF Unit
Pay off Stand For Bobbin	Suitable For 630 mm Flange Dia Bobbins.
Bobbin Holding	Pintle Type clamping and loosen bobbins ,Lifting By manual operation
Stranding Machine
Stranding	The machine will be able to make 7 wire strands
No . of Bobbin	1+6
Tube for Bobbins	Rotating type on under roller. The under rollers are of Hylem Material. The revolution of the will be 500RPM to ,with 30hp AC motor. With frequency drive and the tube cage will be balanced. Pneumatic brake will be provided fixed type.
Rotor	M.S Tube are accurately machined and coupled together to form the rotor, which is supported on under – rollers. All the cradles are M S Fabricated in the tube and are provided with bobbin shaft locking arrangement and wire tensioning device.
Bobbin Holding	The bobbins are placed between steel pintles which are fixed with safety locking device (spring type ) as well as with tension device.
Guide Pulleys	Anti-frictional bearings and guide nipples will be provided for free path to lead off wire.
Brake	Conventional caliper type disk brakes frictional pneumatic brakes on both the ends of the rotor.
Safety Guards	We will provide protective guards of the rotor with doors. (Sliding Type)