Touch Foil (Flexible Film) Projected Capacitive Touch (40 points)

Listing ID #4697352

Get Latest Price

Resolution30” to 50” <3mm, 55” and above <5mm
SensitivityAdjustable in software. Maximum thickness of glass mounting
~0.3mm, ~0.5mm depending on rear
projection material selectedStylus type
Supply Type Manufacturer, Exporter, Supplier, Retailer
Preferred Buyer Location All over the world

View More Details

Product Details

Resolution 30” to 50” <3mm, 55” and above <5mm
10” to 82” Environment:
Sensor: Detection method
substrate 12mm (single layer – no double glazing)
Power requirements Power from USB port (5V±5%, less than 100mA)
length, 5m maximum cable length recommended with USB)
PET film with embedded micro-fine sensing array Electronics
<0.1g Sensor MTBF
(from operation side)
Operating temperature -20°C > +60°C
Storage temperature -30°C > +70°C
No moving parts / no known wear out mechanism Controller:
Storage humidity 90%RH @ 40°C
Operating humidity 90%RH @ 40°C
~0.3mm, ~0.5mm depending on rear
projection material selected Stylus type
Connectivity USB V1.1, compatible with USB V2.0 (3m standard cable
(from operation side)
EMC FCC, CE
Software Windows 2000 / Windows XP
Regulatory Controller compliant with CE and UL
Calibration drift One time calibration, no drift
Protected by mounting substrate / no moving parts Sensor thickness
Projected Capacitance Construction
Functionality Mouse move only, activate on touch, activate on release, drag
and drop, touch / hold / release
Water resistance Determined by mounting substrate
Mechanical: Immunity to damage
Positional accuracy <1.5% of diagonal error within the recommended viewing
Finger, gloved hand Operating force
Detachable USB controller Size range
Resistance to contamination Determined by mounting substrate
Sensitivity Adjustable in software. Maximum thickness of glass mounting

It is designed to be mounted to the rear surface of a rigid transparent substrate (such as glass
or plastic), and operated by touching the front surface of that substrate.

It is an optically transparent touch sensor intended for use in front of an LCD (when mounted to
a suitable substrate).

It is a touch sensor incorporating an integrated rear projection surface intended for use with a
projector (No LCD required).

Application:

Primarily intended for use in large format interactive digital signage and information systems
found in applications such as retail, advertising and exhibitions.

OPERATION

The associated electronic controller effectively divides the sensor into pixel-sized sensing cells,
using an array of microfine metal track electrodes, which are not ITO (Indium Tin Oxide) based,
and are virtually invisible when in front of a powered display or rear projection film. These tracks
are connected to the electronic controller board, and an oscillation frequency is established for
each track. Using the theory of capacitance field effect, a touch on the overlay substrate to which
the sensor is mounted causes a change in the oscillating frequency of the tracks around that
particular point; the position of which is then determined by the driver software. Unlike conventional capacitive systems where the operator touches the actual conducting surface of the
sensor, the active component of the flexible film touch sensor is embedded within the sensor and
protected by the mounting substrate.

The driver software allows the touch screen to interface with the host computer’s operating
system by emulating the behavior of a computer mouse, and translates touches into mouse
movements and clicks.

The flexible film touch sensor are available with various surface preparations to facilitate bonding to the supporting substrate or window. Guidelines on the application these to a supporting substrate are available upon request.

Film Sizes: 10", 12", 15", 17", 19", 22", 24", 26", 30"
With opaque rear projection film laminated mounted on rear surface of touch foil: 22", 26", 30", 32", 37", 40", 42" , 46", 50", 55", 60", 67", 70", 82"

Interested in this product? Ask for more details & Latest Price from seller

Send Enquiry

Company Details

We are proud to announce the completion of 26 years of our introduction of the Touch Screen in India .
We are the pioneer and India 's only company dedicated to Touch Technology since 1995. Our touch screens are in use in every application you can think of and clients are located all over India . We have a touch screen for every requirement. We offer you the best in new touch screen technologies, kiosk & POS peripherals and display monitors. Our website is a source of touch screen information for new users and experienced ones.
AMS has worked on numerous successful country wide projects, providing 24X7 support along with the widest range of drivers - Windows family, CE, Linux etc.
Worked on complex installations such as multiple touch monitors installed on a single PC for Simulation, Training etc.
AMS Impex is the only Touch Screen Distributor in India with a fully equipped service center and the capability to integrate AND repair touch screens. Contact us if you have problems with any touch screen / display.
Why AMS?
Our Advantages:
Touch Screen & Display Technology - our core products.
Super fast 24X7 personalised response to queries / sample requests / troubleshooting.
Product evaluations with 30 day money guarantee for qualified developers.
We offer the most aggressive prices for your projects.
Direct support from us (no third party involvement).
The Longest warranties in the Industry.
We are the oldest in the Indian Touch Industry (since 1995).
Widest product range of Touch Technologies & sizes 1.4' - 150' (one stop touch shop).
Shortest lead time - 2-4 weeks for any qty. Vs. others 4-12 weeks.
Largest Ex-stock Inventory of parts.
Products direct from reputed core component manufacturers (no re-badged products).
Widest range of experience - customers from Industrial, Education, Banking, Kiosk, ATM, POS (Retail/Hospitality), Medical, Simulation to Gaming.
Low cost solutions (DIY) to retrofit locally available branded LCD monitors Vs. others expensive